ElectronicControl MT10
| Technical data | |
|---|---|
| Mains connection | 1~230 V, 50/60 Hz |
| Min. rated current I | 9.1 A |
| Max. rated current per pump I | 10 A |
| Protection class | IP55 |
| Inlet connection | G 1¼ |
| Outlet connection | G 1¼ |
| Min. measuring range | 0.5 bar |
| Max. measuring range | 12 bar |
| Product data | |
|---|---|
| Brand | Wilo |
| Product description | ElectronicControl MT10 |
| Article number | 4160336 |
| EAN number | 4048482194097 |
| Colour | Green |
| Minimum order quantity | 1 |
| Date of sales availability | 2011-09-01 |
| Packaging | |
|---|---|
| Packaging type | Cardboard box |
| Packaging property | Sales packaging |
| Pieces per pallet | 1 |
| Number per layer | 1 |
| Dimension, weight | |
|---|---|
| Length with packaging | 300 mm |
| Length L | 262 mm |
| Height with packaging | 270 mm |
| Height H | 196 mm |
| Width with packaging | 200 mm |
| Width W | 178 mm |
| Gross weight, approx. m | 4 kg |
| Net weight, approx. m | 3.2 kg |
Electronic control unit with frequency converter for speed control of pumps for non-aggressive clear water containing no suspended matter.
The electronic control unit makes it possible, independent of the respective flow rate, to keep the pressure within the system at a constant, previously set target value (Automatic operation) and thus also to minimise the power consumption.
The pressure remains constant at the previously set pressure value.
The pump can be tested in manual mode at its maximum speed.
The Wilo-ElectronicControl starts the pump in automatic mode when the system pressure falls below the set pressure by more than the set pressure difference.
Once the system pressure has reached the set pressure, the Wilo-ElectronicControl stops the pump after a time interval that has been previously set.
The Wilo ElectronicControl protects the pump against
- Dry run
- Excess current
- Excess water temperature
- Frost
- Short-circuit
- Overvoltage
- Undervoltage
Scope of delivery
- Wilo-ElectronicControl, pre-wired
- Mains cable with plug and EMC filter
- Installation and operating instructions
Necessary accessories
- Diaphragm pressure vessel with a minimum of 2 l total volume, for pressure-side installation upstream from the Wilo-ElectronicControl
- Non-return valve for suction-side installation directly upstream from the Wilo-ElectronicControl
| Technical data | |
|---|---|
| Mains connection | 1~230 V, 50/60 Hz |
| Max. rated current per pump I | 10 A |
| Protection class | IP55 |
| Inlet connection | G 1¼ |
| Outlet connection | G 1¼ |
| Max. volume flow Q | 15 m³/h |
| Min. ambient temperature | 0 °C |
| Max. ambient temperature | 50 °C |
| Min. fluid temperature | 0 °C |
| Max. fluid temperature | 40 °C |
| Net weight, approx. | 3.2 kg |
| Make | Wilo |
| Item no. | 4160336 |
Installation and operating instructions
Wilo-ElectronicControl
| Article Number | 4159796 |
| Edition | 2304 |
| Number of pages | 120 |
PDF (4 MB)Wilo-ElectronicControl
| Article Number | 4159796 |
| Edition | 2304 |
| Number of pages | 20 |
PDF (1 MB)Certification booklet
Wilo-ElectronicControl
| Article Number | 4251853 |
| Edition | 2022-01 |
| Number of pages | 16 |
PDF (4 MB)