HiControl 1
| Technical data | |
|---|---|
| Mains connection | 1~230 V, 50/60 Hz |
| Min. rated current I | 2 A |
| Max. rated current per pump I | 10 A |
| Protection class | IP65 |
| Inlet connection | G 1 |
| Outlet connection | G 1 |
| Materials | |
|---|---|
| Material, housing | PA6 |
| Product data | |
|---|---|
| Brand | Wilo |
| Product description | HiControl 1 |
| Article number | 4190896 |
| EAN number | 4048482439655 |
| Colour | black/grey |
| Minimum order quantity | 1 |
| Date of sales availability | 2015-03-01 |
| Packaging | |
|---|---|
| Packaging type | Cardboard box |
| Packaging property | Sales packaging |
| Pieces per pallet | 1 |
| Number per layer | 1 |
| Dimension, weight | |
|---|---|
| Length with packaging | 180 mm |
| Length L | 175 mm |
| Height with packaging | 175 mm |
| Height H | 162 mm |
| Width with packaging | 150 mm |
| Width W | 142 mm |
| Gross weight, approx. m | 1.1 kg |
| Net weight, approx. m | 1 kg |
Electronic control and regulation accessories. The Wilo HiControl 1 series is used for borehole pumps to enable automatic operation. Wilo-HiControl 1 protects the pump against operation with low volume flow. Thanks to a volume flow sensor and pressure sensor, Wilo-HiControl 1 automates the pump between two values, the start-up pressure and the shut-down volume flow. If the pressure in the network is lower than the start-up pressure, Wilo-HiControl 1 starts the pump. The pump continues to operate until the volume flow falls below the value of the shut-off volume flow.
The interior small container prevents water hammering and cycling.
Wilo-HiControl 1 can be mounted on surface pumps or connected to submersible pumps for domestic water supply.
Special features
- Simple installation
- Especially compact design makes it suitable for many types of installation locations
- High operational reliability due to electronic fault signal
- Protection of the connected pumps due to built-in protection against low water levels
- Simple operation due to clear operating state display
- No additional diaphragm pressure vessel required
- Perfect corrosion protection, due to rust-free materials
Inline version with input and output in vertical axis and uniform thread connections, suitable for direct connection to the pump housing or wall surface installation with a wall bracket (accessories).
Note
The HiControl 1 may be installed only in vertical position with the output at the top.
Scope of delivery
- HiControl 1
- Cable tie for quick and secure installation of ready-to-plug pump units
| Technical data | |
|---|---|
| Phases | 1 |
| Rated voltage U | 220/230/240 V |
| Mains frequency f |
|
| Min. rated current I | 2 A |
| Max. rated current per pump I | 10 A |
| Protection class | IP65 |
| Max. fluid temperature | 50 °C |
| Max. ambient temperature | 50 °C |
| Max. volume flow Q | 8 m³/h |
| Inlet connection | G 1 |
| Outlet connection | G 1 |
| Material, housing | PA6 |
| Net weight, approx. | 1 kg |
| Make | Wilo |
| Item no. | 4190896 |
Installation and operating instructions
Wilo-HiControl1
| Article Number | 4196363 |
| Edition | 2019-02 |
| Number of pages | 92 |
| Language | de, el, en, fr, it, nl, ru, tr |
PDF (2 MB)Certification booklet
Wilo-HiControl 1
| Article Number | 4251854 |
| Edition | 2022-11 |
| Number of pages | 16 |
| Language | language neutral |
PDF (6 MB)