Wilo-Economy MHIE | Wilo

Wilo-Economy MHIE

Wilo-Economy MHIE

Easy operation and compact design
All parts in contact with fluid are made of stainless steel
IEC three-phase motor (level IE2) with integrated frequency converter (frequency converter for 3~motors have optional interfaces for bus communication using plug-in IF modules)
Full motor protection
Drinking water approval (ACS, KTW, WRAS) for all components in contact with the fluid (EPDM version)

Economy MHIE

Non-self-priming multistage pump with integrated frequency converter

Stainless steel pump in monobloc design
Hydraulics in 1.4301
Threaded connection
Integrated frequency converter
Three-phase version with red-button technology and LCD display for state display
Integrated thermal motor protection

Example:	MHIE 402N-1/E/3-2/M13-2G
MHIE	Multistage horizontal high-pressure centrifugal pump, electronically controlled
4	Volume flow in m³/h
02	Number of impellers
N	IE2 motor
1	Material1 = 1.4301 (AISI 304)2 = 1.4404 (AISI 316L)
E	Type of gasketE = EPDMV = FKM (Viton)
3	1 = 1~ (single-phase AC)3 = 3~ (three-phase AC)‐ = hydraulics without motor
M13	Only for 1~ (single phase AC)Preset operating mode on deliveryM13 = mode 1 or 3 (manual or remote control)M2 = mode 2 (pressure regulation mode)
2G	Frequency converter, second generation

Mains connection 1 ~ 230 V (±10 %), 50 Hz or 230 V (±10 %), 60 Hz
Mains connection 3 ~ 400 V (±10 %), 50 Hz (Y) or 400 V (±10 %), 60 Hz (Y)
Fluid temperature -15 to +110 °C
Max. operating pressure 10 bar
Max. inlet pressure 6 bar
Protection class IP 54
Emitted interference according to EN 61000-6-4 (EN 61000-6-3 optionally)
Interference resistance in compliance with EN 61000-6-2
Nominal diameters of pipe connections on suction side to type Rp 1, Rp 1¼, Rp 1½ or Rp 2
Nominal diameters of pipe connections on pressure side to type Rp 1, Rp 1¼ or Rp 1½

PDF (1 MB)

PDF (10 MB)

PDF (24 MB)

PDF (262 KB)