Rexa PRO | Submersible pump | Wilo

Rexa PRO

Submersible pump

Highly effective thanks to efficiency-optimized single-channel impellers
Safe to operate due to low-clogging vortex impellers
Verified safety: Ex-rated in accordance with ATEX as standard
Energy-efficient IE3 motor technology available as an option

Wilo-Rexa PRO

Effective removal of micropollutants using the powdered activated carbon process in Pforzheim, Germany

Number of results: [93]

Discharge port

DN 50 [23]

DN 65/80 [21]

DN 80 [15]

DN 80/100 [20]

DN 100 [14]

Rated power P₂

[0]

Mains connection

1~230 V, 50 Hz [20]

3~400 V, 50 Hz [73]

Free ball passage of the hydraulics

45 mm [14]

50 mm [15]

55 mm [9]

65 mm [21]

80 mm [20]

100 mm [14]

Hydraulics type

Semi-open single-channel impeller [8]

Single-channel impeller [32]

Vortex impeller [53]

Product description	Discharge port	Rated power P₂	Ex field of application	Float switch	Mains plug	Mains connection	Free ball passage of the hydraulics	Article number
Rexa PRO-C05-322A/21M011X523/O	DN 50	1.1 kW	ATEX Zone 1, ATEX Zone 2	no	no	1~230 V, 50 Hz	45 mm	6098471
Rexa PRO-C05-322A/21T011X540/O	DN 50	1.1 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	45 mm	6098472
Rexa PRO-C05-324A/21M011X523/O	DN 50	1.1 kW	ATEX Zone 1, ATEX Zone 2	no	no	1~230 V, 50 Hz	45 mm	6098473
Rexa PRO-C05-324A/21T011X540/O	DN 50	1.1 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	45 mm	6098474
Rexa PRO-C05-326A/21M015X523/O	DN 50	1.5 kW	ATEX Zone 1, ATEX Zone 2	no	no	1~230 V, 50 Hz	45 mm	6098475
Rexa PRO-C05-326A/21T015X540/O	DN 50	1.5 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	45 mm	6098476
Rexa PRO-C05-328A/21T025X540/O	DN 50	2.5 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	45 mm	6098477
Rexa PRO-C05-329A/21T025X540/O	DN 50	2.5 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	45 mm	6098478
Rexa PRO-C06-342A/21T025X540/O	DN 65/80	2.5 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	45 mm	6098479
Rexa PRO-C06-344A/21T025X540/O	DN 65/80	2.5 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	45 mm	6098480
Rexa PRO-C06-345A/21T025X540/O	DN 65/80	2.5 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	45 mm	6098481
Rexa PRO-C06-346A/21T039X540/O	DN 65/80	3.9 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	45 mm	6098482
Rexa PRO-C06-348A/21T039X540/O	DN 65/80	3.9 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	45 mm	6098483
Rexa PRO-C06-349A/21T039X540/O	DN 65/80	3.9 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	45 mm	6098484
Rexa PRO-C08-412A/21M011X523/O	DN 80	1.1 kW	ATEX Zone 1, ATEX Zone 2	no	no	1~230 V, 50 Hz	55 mm	6098485
Rexa PRO-C08-412A/21T011X540/O	DN 80	1.1 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	55 mm	6098486
Rexa PRO-C08-413A/21M015X523/O	DN 80	1.5 kW	ATEX Zone 1, ATEX Zone 2	no	no	1~230 V, 50 Hz	55 mm	6098487
Rexa PRO-C08-413A/21T015X540/O	DN 80	1.5 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	55 mm	6098488
Rexa PRO-C08-415A/21T025X540/O	DN 80	2.5 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	55 mm	6098489
Rexa PRO-C08-417A/40M011X523/O	DN 80	1.1 kW	ATEX Zone 1, ATEX Zone 2	no	no	1~230 V, 50 Hz	55 mm	6098490
Rexa PRO-C08-417A/41T011X540/O	DN 80	1.1 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	55 mm	6098491
Rexa PRO-C08-418A/40M015X523/O	DN 80	1.5 kW	ATEX Zone 1, ATEX Zone 2	no	no	1~230 V, 50 Hz	55 mm	6098492
Rexa PRO-C08-418A/41T015X540/O	DN 80	1.5 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	55 mm	6098493
Rexa PRO-C08-432A/21T025X540/O	DN 80	2.5 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	65 mm	6098494
Rexa PRO-C08-433A/21T025X540/O	DN 80	2.5 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	65 mm	6098495
Rexa PRO-C08-434A/21T039X540/O	DN 80	3.9 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	65 mm	6098496
Rexa PRO-C08-435A/21T039X540/O	DN 80	3.9 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	65 mm	6098497
Rexa PRO-C08-436A/21T050X540/O	DN 80	5 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	65 mm	6098498
Rexa PRO-C08-437A/21T050X540/O	DN 80	5 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	65 mm	6098499
Rexa PRO-C08-533A/41T025X540/O	DN 80/100	2.5 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	80 mm	6097797
Rexa PRO-C08-535A/40T035X540/O	DN 80/100	3.45 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	80 mm	6097796
Rexa PRO-C08-537A/40T045X540/O	DN 80/100	4.5 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	80 mm	6097795
Rexa PRO-C10-512A/40M011X523/O	DN 100	1.1 kW	ATEX Zone 1, ATEX Zone 2	no	no	1~230 V, 50 Hz	100 mm	6098190
Rexa PRO-C10-512A/41T011X540/O	DN 100	1.1 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	100 mm	6098191
Rexa PRO-C10-513A/40M015X523/O	DN 100	1.5 kW	ATEX Zone 1, ATEX Zone 2	no	no	1~230 V, 50 Hz	100 mm	6098192
Rexa PRO-C10-513A/41T015X540/O	DN 100	1.5 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	100 mm	6098193
Rexa PRO-C10-514A/41T025X540/O	DN 100	2.5 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	100 mm	6098194
Rexa PRO-C10-516A/40T035X540/O	DN 100	3.45 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	100 mm	6098195
Rexa PRO-C10-518A/40T035X540/O	DN 100	3.45 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	100 mm	6098196
Rexa PRO-C10-518A/40T045X540/O	DN 100	4.5 kW	ATEX Zone 1, ATEX Zone 2	no	no	3~400 V, 50 Hz	100 mm	6076773

Wilo-Rexa PRO C

Design

The fully submersible sewage pump is designed for stationary and portable wet installation as well as for stationary dry installation. It can be used in continuous operation or intermittent periodic duty.

Liquid

For pumping in commercial areas of:

Sewage containing faeces
Wastewater (with a small proportion of sand and gravel)
Sludge with a maximum dry matter content of 8% (depending on the hydraulics selected)

Equipment/function

Certified explosion approval in accordance with ATEX
Winding temperature monitoring with bimetallic sensor
Leakage detection for the motor compartment (P 13 motor only)
Connection cable with bare cable ends
Single-phase version with capacitor switchgear

Type key

Example:	Rexa PRO-V06-212A/21M015X540/O
Rexa	Submersible sewage pump
PRO	Series
V	Impeller shape: V = vortex impeller C = single-channel impeller
06	Nominal diameter of the discharge port: 05 = DN 50 06 = DN 65/80 08 = DN 80 10 = DN 100
21	Performance indicator
2	Characteristic curve number
A	Identifier for material and coating type
2	Number of poles
1	Motor efficiency class (derived from IEC 60034-30) 1 = IE1 3 = IE3
T	Mains connection version: M = single-phase AC T = three-phase AC
015	Value/10 = rated power P₂ in kW
X	Certified explosion approval in accordance with ATEX
5	Mains frequency: 50 Hz
40	Rated voltage code: 23 = 230 V 40 = 400 V
O	Connection cable with bare cable ends

Technical data

Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
Submerged operating mode: S1
Non-immersed operating mode (P 13 motor only):
- Short-time duty: S2-30 min
- Intermittent periodic duty: S3 25%
IP rating: IP68
Insulation class: F
Fluid temperature: 3 to 40 °C (37 to 104 °F)
Fluid temperature, max. 60 °C (140 °F) for 3 min
Max. immersion depth: 20 m (66 ft)

Materials

Motor housing: EN-GJL-250 (ASTM A48 Class 35/40B)
Hydraulics housing: EN-GJL-250 (ASTM A48 Class 35/40B)
Impeller: EN-GJL-250 (ASTM A48 Class 35/40B)
Static seals: NBR (nitrile)
Seal on the pump side: SiC/SiC
Seal on the motor side: C/MgSiO4
Shaft end: Stainless steel 1.4021 (AISI 420)

Construction

Single-phase version

The sewage pump is equipped with a vortex impeller or a half-open single-channel impeller. The pump has a horizontal discharge port with a flange connection. The hydraulics housing and the impeller are made of cast iron. The surface-cooled single-phase motor has winding temperature monitoring and an internal moisture probe for leakage detection. The oil-filled sealing chamber has two mechanical seals. The motor housing is also made of grey cast iron. The pump is supplied with a detachable connection cable that has a capacitor box for the starting and operating capacitors as well as bare cable ends. The pump is Ex-certified as standard.

Three-phase version

The sewage pump is equipped with a vortex impeller or a half-open single-channel impeller. The pump has a horizontal discharge port with a flange connection. The hydraulics housing and the impeller are made of cast iron. The surface-cooled three-phase motor has winding temperature monitoring and an internal moisture probe for leakage detection. The oil-filled sealing chamber has two mechanical seals. The motor housing is also made of grey cast iron. The pump is supplied with a detachable connection cable with bare cable ends. The pump is Ex-certified as standard.

Scope of delivery

Pump
Installation and operating instructions

Options

IE3 motors
Thermal winding monitor with PTC sensor
Motor winding in insulation class "H"
Static seals in FKM (FPM)
Ceram C0 coating for housing and impeller to protect against corrosion
Special voltages

Accessories

Suspension unit for wet installation
Pump support foot for portable installation
Level control devices
External pencil electrode for leakage detection in the sealing chamber
Fixation sets with bonded anchor
Installation accessories and chains
Switchgear, relays and plugs

Rexa PRO

Submersible pump

Logos/Certifications

Recommended services