Wilo-Initial Waste | Wilo

Wilo-Initial Waste

Wilo-Initial Waste

Particolarità/vantaggi del prodotto

Operationally reliable due to self-switched motor protection
Easy operation due to fitted float switch

Prestazioni di assistenza raccomandate

Tipo costruttivo

Submersible pump for fully automatic operation in portable wet well installation.

Liquidi

For the pumping in domestic areas of:

Sewage not containing faeces
Wastewater (with small amounts of sand and gravel)

Equipaggiamento/funzionamento

Self-switching thermal motor monitoring
Integrated capacitor
Fitted float switch

Chiave di lettura

Example	Wilo-Initial WASTE 14-9/522/AEF-10M
Initial	Series
WASTE	Sewage pump
14	Nominal flow in m³/h
9	Nominal head in m
5	Mains frequency: 5 = 50 Hz 6 = 60 Hz
22	Rated voltage: 22 = 1~220 V 23 = 1~230 V
A	With float and plug
EF	Plug type: EF = CEE7/7 B = type B I = type I M = type M
10M	Cable length

Dati tecnici

Mains connection (depending on product type):
- 1~230 V, 50 Hz
- 1~220 V,50 Hz
- 1~220 V,60 Hz
Submerged operating mode: S1
Non-immersed operating mode: S3 25%
Protection class: IP68
Insulation class: F
Fluid temperature: 3 ... +40 °C (37 ... 104 °F)

Materiali

Hydraulics housing: PP
Impeller: PA6-GF30
Motor housing: 1.0038 (steel)
Seal:
- Pump/motor: NBR
- Static: NBR
Shaft end: 1.4005 (AISI 416)

Costruzione

Sewage pump with vortex impeller and vertical threaded connection. Pump housing and impeller made of composite material. 1~ motor with integrated operating capacitor, self-switching thermal motor monitoring, and basic sealing with a rotary shaft seal. Motor housing made of steel. Connection cable with float switch and fitted plug (depending on product type):

Type E (CEE 7/5) or type F (CEE 7/3)
Type I
Type B
Type M

Fornitura

Pump
Fitted elbow with a threaded connection R 1½
Installation and operating instructions

Istruzioni di montaggio, uso e manutenzione