Wilo-Initial Drain | Wilo

Wilo-Initial Drain

Wilo-Initial Drain

Particolarità/vantaggi del prodotto

Installazione semplice all'interno di pozzi stretti grazie alla struttura compatta e al peso ridotto
Sicurezza di funzionamento grazie al salvamotore automatico
Semplicità di funzionamento grazie all’interruttore a galleggiante integrato

Prestazioni di assistenza raccomandate

Tipo costruttivo

Submersible pump for fully automatic operation in portable wet well installation.

Liquidi

For the pumping in domestic areas of wastewater with small amounts of sand and gravel.

Equipaggiamento/funzionamento

Self-switching thermal motor monitoring
Integrated capacitor
Fitted float switch

Chiave di lettura

Example	Wilo-Initial DRAIN 10-7/522/AEF-10M
Initial	Series
Drain	Wastewater pump
10	Nominal flow in m³/h
7	Nominal head in m
5	Mains frequency: 5 = 50 Hz 6 = 60 Hz
22	Rated voltage: 22 = 1~220 V 23 = 1~230 V
A	With float and plug
EF	Plug type: EF = CEE7/7 B = type B I = type I M = type M
10 M	Cable length

Dati tecnici

Mains connection (depending on product type):
- 1~230 V, 50 Hz
- 1~220 V,50 Hz
- 1~220 V,60 Hz
Submerged operating mode: S1
Non-immersed operating mode: S3 25%
Protection class: IP68
Insulation class: F
Fluid temperature: 3 ... +40 °C (37 ... 104 °F)

Materiali

Hydraulics housing: PP
Impeller: PA6-GF30
Motor housing: 1.0038 (steel)
Seal:
- Pump/motor: NBR
- Static: NBR
Shaft end: 1.4005 (AISI 416)

Costruzione

Wastewater pump with vortex impeller and vertical threaded connection (hose connection enclosed). Pump housing and impeller made of composite material. 1~ motor with integrated operating capacitor, self-switching thermal motor monitoring, and basic sealing with a rotary shaft seal. Motor housing made of steel. Connection cable with float switch and fitted plug (depending on product type):

Type E (CEE 7/5) or type F (CEE 7/3)
Type I
Type B
Type M

Fornitura

Pump
Hose connection Ø 24/32 mm, enclosed
Installation and operating instructions

Istruzioni di montaggio, uso e manutenzione