EMUport CORE 20.2-17A | Wilo
Simile alla figura

EMUport CORE 20.2-17A

Dati tecnici
Testo per capitolato

Fully submersible sewage lifting unit ready for connection with solids separation system in accordance with DIN EN 12050-1. With the solids separation system version, coarse solids are separated before the pumps and do not come into contact with them, thereby maximizing operational reliability. All-in-one gas-tight and watertight collection reservoir without constructive welded joints, as well as two separately-lockable and externally maintainable solids separation reservoirs. Individual shut-off makes it possible to carry out maintenance work during operation. Pumping is performed by two high-performance submersible sewage pumps in dry well installation that run in alternating operation. The dry well installation of the pumps and their configuration as a redundant double-pump system ensures maximum hygiene, ease of maintenance, and operational reliability. The collection reservoir has rounded edges, the tank bottom is bevelled, the deepest point is located directly below the pump. This prevents deposits and the drying of solids at critical points. Quick connector to the pumps and the inspection opening facilitate maintenance work. Separate blocking of the solids separation reservoir facilitate maintenance while the unit is in operation. The level is recorded by a level probe.

Scope of delivery

  • Submersible pump solids separation system with two dry well installation submersible pumps
  • 2x gate valve for solids separation reservoir
  • 2x non-return valve on the pressure side in rectangular design
  • 2x gate valve on the pressure side
  • Consolidation of the pressure outlet line
  • 1x level probe
  • 1x floor fixation as cross beam
  • 2.5 m aeration and venting hose
  • 1x maintenance set with blind flange

Recommended accessories

  • Wilo-Control SC-L-…-FTS switchgear
  • Inlet slide valve
Campo d’applicazione consentito
temperatura fluido T 3 °C
temperatura ambiente T 3 °C
Pressione d’esercizio massima PN 6 bar
Dati prodotto
Volume lordo del recipiente V 440 l
Volume di comando V 295 l
Modo di funzionamento (non sommerso) S3-50%
Altezza H 1400 mm
Durata L 1390 mm
Larghezza W 1410 mm
Misura diagonale 1500 mm
Dati motore
Alimentazione di rete 3~400 V, 50 Hz
Tolleranza di tensione ±10 %
Potenza nominale del motore P2 2,65 kW
Numero giri nominale n 2908 1/min
Corrente nominale IN 5,7 A
Classe isolamento H
Grado di protezione motore IP68
Tipo connessione Diretto online (DOL)
Frequenza max. di avviamenti t 30 1/h
Salvamotore WSK
Cavo
Spina di rete no
Tipo di cavo di collegamento Rimovibile
Materiali
Materiale serbatoio PE
Corpo pompa Ghisa
Girante Ghisa
Albero Acciaio inossidabile
Materiale motore Ghisa
Quota di montaggio
Raccordo per tubi sul lato aspirante DN 200
Raccordo per tubi sul lato pressione Ø 90
Raccordo di sfiato Ø 75
Informazioni sull’inserimento di ordini
Prodotto Wilo
Denominazione del prodotto EMUport CORE 20.2-17A
Peso netto circa m 450 kg
Codice articolo 6078608
Download

Libretto di certificazione

Wilo-EMUport Core 20.2 / 45.2 / 50.2 / 60.2

Codice articolo 2546469
Edizione 2021-07
Formato pagina 209.9 x 297.0 mm
Numero di pagine 40
PDF (3 MB)

Certificato REACH (documenti)

REACH regulation

Edizione 2021-10
Formato pagina 209.9 x 297.0 mm
Numero di pagine 2
PDF (162 KB)
BIM/CAD