Wilo-Drain TC 40

Special features/product advantages

  • Easy operation due to the attached float switch
  • Integrated pump base for easy installation
  • Impeller made of plastic
  • Low weight

Series description

Design

Submersible sewage pump for intermittent operation for stationary and portable wet well installation.

Application

Pumping of

  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater

Type key

E.g.:Wilo-Drain TC 40/10
TTauchmotorpumpe (submersible pump)
CHydraulic housing made of cast iron
40Nominal diameter [mm]
10Max. delivery head [m]

Technical data

  • Mains connection: 1~230 V, 50 Hz
  • Submerged operating mode: S1 or S3 25%
  • Non-immersed operating mode: S3 25%
  • Protection class: IP 68
  • Insulation class: F
  • Thermal winding monitoring
  • Max. fluid temperature: 3 - 40 °C
  • Cable length: 5 m
  • Free ball passage: 40 mm
  • Max. immersion depth: 2 m

Equipment/function

  • Ready-to-plug
  • Including float switch
  • Thermal motor monitoring

Description/design

Submersible sewage pump as submersible monobloc unit for stationary and portable wet well installation.

Hydraulics

The outlet on the pressure side is designed as vertical threaded connection Rp 1½. Vortex impeller are used as the impeller shapes.

Motor

The oil-filled motors give off heat directly to the pumped fluid via an integrated heat exchanger. As a result, these motors can be used in immersed state for permanent and intermittent operation. In non-immersed state, these motors can be used for intermittent operation.

A sealing chamber protects the motor from fluid ingress. The filling fluid used is potentially biodegradable and environmentally safe.

The motor cable and float switch can be detached and replaced.

Sealing

Sealing on the fluid side is achieved by a bidirectional mechanical seal, while sealing on the motor side is achieved by a rotary shaft seal.

Materials

  • Pump housing: EN-GJL-200
  • Pedestal: stainless steel
  • Impeller: PA 30GF
  • Shaft: stainless steel 1.4005
  • Mechanical seal on pump side: carbon/ceramic
  • Shaft seal on motor side: NBR
  • Static gasket: NBR
  • Motor housing: stainless steel 1.4308

Scope of delivery

  • Pump ready for connection with 5 m connecting cable and shock-proof plug
  • With attached float switch
  • Installation and operating instructions

Accessories

  • Non-return valve and gate valve
  • Various pressure outlets and hoses
  • Switchgears and relays

Duty chart

Drain TC 40

제품

Design

Submersible

Single-channel impeller

-

Vortex impeller

Multi-channel impeller

-

Open multi-channel impeller

-

Macerator

-

Turbulator

-

Sealing chamber

-

Leakage chamber

-

Sealing by mechanical seal on motor side

-

Sealing by rotary shaft seal on motor side

Sealing by mechanical seal on fluid side

AC motor

Three-phase motor

-

Direct activation

Star-delta activation

-

FC operation

-

dry motor

-

Motor with oil cooling

Dry motor with closed-circuit cooling

-

Application

Wet well installation, stationary

-

Wet well installation, portable

Dry well installation, stationary

-

Dry well installation, portable

-

Equipment/function

Motor leakage monitoring

-

Sealing chamber monitoring

-

Leakage chamber monitoring

-

Motor temperature monitoring, bimetal

PTC motor temperature monitoring

-

Explosion protection

-

Float switch

Capacitor box for 1~230 V

integrated

Ready-to-plug

Materials

Pump housing

Cast iron

Impeller

Cast iron

Motor housing

Cast iron

Downloads

General overview

Edition 2017
Page format A4
Number of pages 72

PDF (46 MB)

다운로드

Wilo-Drain TC 40

Article Number 2081931
Edition 1603
Version number 05
Page format A4
Number of pages 14

PDF (1 MB)

다운로드

제품

PDF: Wilo-Drain TC 40

구성

페이지 선택

페이지 크기

선택적 정보

머리글에 표시 할 개인 정보를 입력 할 수 있습니다.

다운로드