6080483, Rexa CUT GI03.31/S-T15-2-540

Data sheet

Operating data
  • Max. delivery head H
    31.00 m
  • Max. volume flow Q
    11 m³/h
  • Optimal volume flow Qopt
    11 m³/h
  • Optimal delivery head Hopt
    31 m
  • Pressure port
    DN 32/40
  • Nominal flange diameter
    DN 32/40
  • Output connection standard
    -
  • Maximum operating pressure p
    10 bar
  • Operating mode (immersed)
    S1
  • Operating mode (non-immersed)
    S2-15 min
  • Max. immersion depth
    20.00 m
  • Max. fluid temperature T
    40 °C
  • Min. fluid temperature T
    3 °C
  • Gross weight, approx. m
    34.2 kg
Unit
  • Maximum operating pressure p
    10 bar
  • Max. immersion depth
    20.00 m
  • Min. fluid temperature T
    3 °C
  • Max. fluid temperature T
    40 °C
Motor data
  • Mains connection
    3~400 V, 50 Hz
  • Voltage tolerance
    ±10 % %
  • Rated current IN
    3.60 A
  • Starting current I
    20 A
  • Power factor cos φ
    0.84
  • Activation type
    Direct online (DOL)
  • Max. switching frequency t
    30 1/h
  • Operating mode (immersed)
    S1
  • Operating mode (non-immersed)
    S2-15 min
  • Protection class motor
    IP68
  • Power consumption P1 max
    2100 W
  • Rated power P2
    1.50 kW
Equipment/function
  • Explosion protection type
    no
  • Motor protection
    Bimetallic
  • Macerator
    yes
  • Motor, leakage detection
    no
  • Sealing chamber, leakage detection
    optional
  • Leakage chamber, leakage detection
    no
Cable
  • Connection cable length
    10.0 m
  • Cable type
    H07RN-F
  • Cable cross-section
    6G1 mm²
Materials
  • Pump housing
    5.1301, EN-GJL-250
  • Impeller
    5.1301, EN-GJL-250
  • Shaft
    1.4401, X5CrNiMo17-12-2
  • Gasket material
    NBR
  • Motor housing
    1.4301, X5CrNi18-10
Installation dimensions
  • Pipe connection on the suction side
    -
  • Pipe connection on the pressure side
    DN 32/40
Information for order placements
  • Brand
    Wilo
  • Product description
  • Net weight, approx. m
    32 kg
  • Article number
    6080483
Product data
  • Maximum operating pressure PN
    3 bar
  • Max. fluid temperature T
    40 °C
  • Min. fluid temperature T
    3 °C
  • Max. ambient temperature T
    40 °C

Dimensions and dimensions drawings

Wilo-Rexa CUT GI03.26../GI03.31.. - stationary wet well installation

Wilo-Rexa CUT GI03.26../GI03.31.. - stationary wet well installation
Wilo-Rexa CUT GI03.26../GI03.31.. - stationary wet well installation

Pump curves

Wilo-Rexa CUT GI/GE — 50 Hz — No. of poles: 2

Wilo-Rexa CUT GI/GE — 50 Hz — No. of poles: 2

Pump curves in accordance with ISO 9906, class 3B. The specified degrees of efficiency correspond to the hydraulic efficiency.

Wilo-Rexa CUT GI/GE — 50 Hz — No. of poles: 2

Wiring diagram

Ordering information

Information for order placements
  • Brand
    Wilo
  • Product description
  • EAN number
    4048482702377
  • Article number
    6080483
  • Gross weight, approx. m
    34.2 kg
  • Net weight, approx. m
    32 kg
  • Overall length L
    275.0 mm
  • Height without packaging H
    530 mm
  • Colour
    silver/black
  • Packaging property
    Transport packaging
  • Packaging type
    Cardboard box
  • Number per layer
    1
  • Width without packaging L
    230.0 mm
  • Minimum order quantity
    1
  • Pieces per pallet
    1

Tender text

Fully submersible sewage pump with internal macerator for vertical wet well installation for pumping wastewater and sewage containing faeces (in the scope of validity of EN 12050-1), also with long-fibre components. Hydraulics housing and impeller made of cast iron, motor housing made of stainless steel, seal made of two independent mechanical seals on pump and motor sides. Pressure connection with horizontal discharge port and thread/flange connection. Surface-cooled motor in three-phase current version with thermal motor monitoring and sealing chamber. Connection cable with bare cable end.

Operating data
  • Fluid media
    Water
  • Max. delivery head H
    31.00 m
Product data
  • Maximum operating pressure PN
    3 bar
  • Max. immersion depth
    20.00 m
  • Min. fluid temperature T
    3 °C
  • Max. fluid temperature T
    40 °C
Motor data
  • Motor design
    Submersible motor – air-cooled
  • Mains connection
    3~400 V, 50 Hz
  • Voltage tolerance
    ±10 % %
  • Power factor cos φ
    0.84
  • Rated power P2
    1.50 kW
  • Power consumption P1 max
    2100 W
  • Rated current IN
    3.60 A
  • Starting current I
    20 A
  • Activation type
    Direct online (DOL)
  • No. of poles
    2
  • Max. switching frequency t
    30 1/h
  • Insulation class
    F
  • Protection class
    IP68
  • Operating mode (immersed)
    S1
  • Operating mode (non-immersed)
    S2-15 min
Cable
  • Connection cable length
    10.0 m
  • Cable type
    H07RN-F
  • Cable cross-section
    6G1 mm²
Equipment/function
  • Macerator
    yes
  • Explosion protection type
    no
  • Motor protection
    Bimetallic
  • Motor, leakage detection
    no
  • Sealing chamber, leakage detection
    optional
  • Leakage chamber, leakage detection
    no
Materials
  • Pump housing
    5.1301, EN-GJL-250
  • Macerator
    1.4528, X105CrCoMo18-2
  • Impeller
    5.1301, EN-GJL-250
  • Shaft
    1.4401, X5CrNiMo17-12-2
  • Gasket material
    NBR
  • Motor housing
    1.4301, X5CrNi18-10
Installation dimensions
  • Pipe connection on the suction side
    -
  • Pipe connection on the pressure side
    DN 32/40
Information for order placements
  • Brand
    Wilo
  • Product description
  • Net weight, approx. m
    32 kg
  • Article number
    6080483

Downloads

Wilo-Rexa CUT GI

Article Number 6069820
Edition 2019-02
Version number 03
Page format 209.9 x 297.0 mm
Number of pages 792

PDF (10 MB)

Download

REACH Regulation

Edition 2018-10
Page format 209.9 x 296.7 mm
Number of pages 4

PDF (581 kB)

Download

PDF: 6080483, Rexa CUT GI03.31/S-T15-2-540

Configure

Page selection

Format selection

Optional information

You can enter any personal information that you want to be displayed in the header.

Download