Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Wilo-EMU RZP 20… – RZP 80-2… | Wilo
Your advantages
Wilo-EMU RZP

Your advantages

  • Can be installed vertically or in the pipe (inline)
  • Low clogging due to self cleaning propeller in stainless steel or PUR

Recommended services

Series description
EMU RZP

Design

Recirculator, directly driven or with single-stage planetary gear

Application

Pumping of

  • Sewage containing faeces
  • Process sewage
  • Wastewater
  • Process water

Equipment/function

  • Thermal motor monitoring
  • Single-stage planetary gear (from RZP 50-3)
  • Pre-chamber control (optional from RZP 50-3)
  • Ex rating (optional)

Typekey

NO VALUE

Technical data

  • Mains connection: 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Protection class: IP68
  • Max. fluid temperature: 40 °C
  • Max. immersion depth: 20 m

Materials

  • Housing components: EN-GJL-250
  • Propellers: PUR or stainless steel 1.4571
  • Propeller hub: Stainless steel 1.4571
  • Screwed connections: Stainless steel 1.4301 or 1.4571
  • Gear shaft (from RZP 50-3): Stainless steel 1.4462
  • Flow housing: Stainless steel 1.4571

Construction

Propeller

2-, 3- or 4-blade propeller with a nominal propeller diameter of 200 mm to 800 mm. Clogging-free design made possible by backward-curved incoming flow edge. Propeller up to a diameter of 400 mm have a patented helix hub.

Motor

Submersible motor of the T-series (surface-cooled motor) with standard connection for an easy and efficient adaptation of the motor power. The motor heat is given off directly to the fluid via the housing. The winding is equipped with a temperature monitor. Large-sized inclined (not with RZP 80-2) and grooved ball bearings ensure long service life of the motor bearings.

Seal

RZP 20 … 40

Double shaft sealing with large-volume sealing chamber to collect leakage from the mechanical seal. If desired, the sealing chamber can be equipped with an external pencil electrode. On the fluid side, sealing is achieved using a corrosion- and wear-resistant mechanical seal made of solid silicon carbide material; on the motor side, a rotary shaft seal is used. A seal bushing ensures long-term corrosion-protected fit of the mechanical seal.

RZP 50-3 … 80-2

Double shaft sealing with large-volume gate and sealing chamber to collect leakage from both mechanical seals. The pre-chamber can be equipped with an external pencil electrode on request. On the motor and fluid side, sealing is achieved using a corrosion- and wear-resistant mechanical seal made of solid silicon carbide material. The sealing between the individual chambers is achieved using rotary shaft seals. A seal bushing ensures long-term corrosion-protected fit of the mechanical seal.

Gear RZP 50-3 … 80-2

Single-stage planetary gear with exchangeable transmissions. The gear bearings are dimensioned so that the resulting mixing forces are absorbed and are not transferred to the motor bearings.

Cable

Longitudinally watertight connection cable type H07 for strong mechanical load (RZP 20) or NSSHÖU for strong mechanical loads. The connection cable enters the motor housing through a water pressure-tight cable inlet with strain relief and bend protection.

Scope of delivery

  • Recirculator with mounted propeller hub, flow housing and cable
  • Cable length as per customer request
  • Fitted accessories depending on the installation type
  • Operating and maintenance manual

Options

  • Special voltages
  • Thermal motor monitoring with PTC thermistor sensor
  • External pencil electrode
    • for sealing chamber control (up to RZP 40)
    • for pre-chamber control (from RZP 50-3)
  • Ceram C0-coating for abrasive and corrosive fluids
  • Ex-rated according to ATEX or FM

Accessories

  • Lowering device
  • Auxiliary lifting device
  • Special fastening pieces (cable bollards) for the use of an auxiliary lifting device for multiple units
  • Additional rope anchoring
  • Fixation material

Commissioning

Operating mode S1 - continuous duty

The recirculation pump must be immersed when operated. Surfacing the propeller is strictly prohibited. In the case of fluctuating fluid levels, the system should switch off automatically if the degree of water submersion drops below the minimum level. The power cables must be installed in a way that these cannot be drawn into the propeller!

Installation types

  • Flexible installation at the discharge pipe with lowering device
  • Stationary installation at the discharge pipe with flange connection
  • Stationary installation as an inline version in the pressure pipe
Documents

Installation and operating instructions

Wilo-EMU RZP

Article Number 6085345
Edition 2018-07
Number of pages 148
PDF (9 MB)

Wilo-EMU TR 14-40

Article Number 6074708
Edition 2019-01
Number of pages 52
PDF (16 MB)

Wilo-EMU TR/TRE 50-2 ... 120-1

Article Number 6074714
Edition 2021-10
Number of pages 48
PDF (21 MB)

Wilo-EMU TR/TRE 50-2 ... 120-1

Article Number 6074736
Edition 2021-10
Number of pages 88
PDF (33 MB)

General overview

General Overview 2024 - International version

Edition 2022
Number of pages 74
PDF (33 MB)

Certification booklet

CE-Booklet Wilo-EMU RZP

Article Number 6078120
Edition 1509
Number of pages 32
PDF (2 MB)

Wilo-EMU RZP, Wilo-Flumen OPTI-RZP 20...40, Wilo-Flumen EXCEL-RZPE 20...40

Article Number 6074696
Edition 2022-05
Number of pages 44
PDF (4 MB)

Brochure

Biological treatment with efficiency.

Number of pages 20
PDF (12 MB)

Certificate REACH

Group Statement REACH

Edition 2021-05
Number of pages 4
PDF (276 KB)

Certificate

Wilo-EMU HHV

Article Number 6072705
Edition 1509
Number of pages 32
PDF (592 KB)

Wilo-EMU RZP

Article Number 6074696
Edition 1702
Number of pages 26
PDF (530 KB)