Wilo-EMUport FTS

Special features/product advantages

  • Maximum operational safety with separation of solids from the sewage: Large solids do not have to pass through the pump - no clogging
  • Cost-effective thanks to retrofit system for simple renovation of old pumping stations
  • Durable and corrosion-free due to the use of PE-HD material
  • Flexible scaling according to your requirements
  • Easy maintenance thanks to hygienic dry well installation and easy access from outside
  • Flexible installation in buildings or in chambers from 1,500mm diameter
  • Energy savings due to optional submersible sewage pumps with IE3 motors

Series description

Design type

Customizable sewage lifting unit with solids separation system for installation in a building or in a pump chamber for outdoor installation.

Application

Pumping of untreated sewage that cannot be returned to the sewer system using natural falls, and for the draining of objects that are below the backflow level (according to DIN EN 12056/ DIN 1986-100).

Equipment/function

  • Sewage lifting unit with solids separation system
  • Two solids separation reservoirs that can be shut off individually
  • Two dry-well installed submersible sewage pumps for alternating mode
  • Pumps in protection class IP55 or IP68
  • Also with IE3 motors
  • Level measurement according to customer request

Scope of delivery

  • Installation-ready sewage lifting unit
  • Two sewage pumps
  • Individual shut-off of the solids separation reservoirs
  • Discharge pipe junction with smooth pipe end
  • Valves

Type key

Example:

Wilo-EMUport FTS MG 1500

FTS

Solids separation system (custom version)

F

Version (M = compact version, F = large version)

G

Type of installation (G = in building, S = with PE-HD pump chamber)

1500

FG = outer diameter of the collection reservoir in mmFS = shaft diameter in mmMG = installation depth below inlet floor in mmMS = shaft inside diameter in mm

Technical data

  • Max. inlet: FTS M…: 35 m³/h; FTS F…: 600 m3/h
  • Max. useable tank volume: FTS M…: 700 l; FTS F…: 12000 l
  • Max. delivery head: FTS M…: 50 m; FTS F…: 80 m
  • Installation depth below inlet floor: 400...2300 mm
  • Mains connection: 3~400 V, 50 Hz,

Materials

  • Collection reservoir: PE-HD
  • Solids separation reservoir: PE-HD
  • Pipework: PE-HD
  • Valves: Cast iron
  • Pumps: Cast iron
  • Pump chamber: PE-HD (for systems FTS MS and FTS FS)

Description/construction

Fully submersible sewage lifting unit ready for connection with solids separation. All-in-one gastight and watertight collection reservoir without constructive welded joints, as well as two separately-lockable solids separation reservoirs. The collection reservoir has rounded edges and the bottom of the basin is bevelled. This prevents deposits and the drying of solids. With pre-filtering in the solids separation reservoirs, the solids are filtered from the fluid and only pre-filtered sewage is directed to the collection reservoir. Pumping is performed by two high-performance submersible sewage pumps in versions IP55 or IP68 in dry well installation. The pumps are designed as a redundant double-pump system and run in alternating operation. Level management can be performed via three float switches or a level probe.

On request, the system can be equipped with automatic backflushing to the collection reservoir and installed directly into a pump chamber made of PE-HD. For management, the corresponding switchgear of the SC-L and CC-L series can be selected as an accessory.

Downloads

General overview 2018 International version

Article Number 2200591
Edition 2018
Version number 1
Page format 209.9 x 297.0 mm
Number of pages 72

PDF (11 MB)

Download

PDF: Wilo-EMUport FTS

Configure

Page selection

Format selection

Optional information

You can enter any personal information that you want to be displayed in the header.

Download