Wilo-Rexa FIT

Special features/product advantages

  • Ready to plug in and use
  • Attached float switch (A-model) enables easy operation
  • Safe vortex hydraulics with large, free ball passage to prevent clogging during operation
  • Sealing chamber with optional external monitoring
  • Low weight

Series description

Design

Submersible sewage pump for intermittent operation for stationary and portable wet well installation, as well as for the stationary dry well installation.

Application

Pumping of

  • Sewage containing faeces in accordance with EN 12050-1
  • Wastewater

Type key

Example:Wilo-Rexa FIT V06DA-110/EAD1-2-T0015-540-A
RexaSubmersible sewage pump
FITSeries
VVortex impeller
06Nominal diameter of pressure connection e.g. DN 65
DHydraulics drilled on the suction side in accordance with DIN drilled
AMaterial version, hydraulics
A = standard version
110Hydraulics definition
Edry motor
AMaterial version, motor
A = standard version
DSeal with two independent mechanical shaft seals
1IE efficiency class, e.g. 1 = IE1 (derived from IEC 60034‑30)
-not Ex-rated
2Number of poles
TMains connection version:

M = 1~

T = 3~

0015Value/10 = motor power P2 in kW
5Frequency (5 = 50 Hz, 6 = 60 Hz)
40Code for rated voltage
AAdditional electrical equipment:

O = with bare cable end

P = with plug

A = with float switch and plug

Technical data

  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Immersed operating mode: S1
  • Non-immersed operating mode: S2-15 min; S3 10%
  • Protection class: IP 68
  • Insulation class: F
  • Fluid temperature: 3 - 40°C, max. 60°C for 3 min
  • Free passage: 50 / 65 / 80 mm
  • Cable length: 10 m

Equipment/function

  • Winding temperature monitoring with bimetal strip
  • Optional external pencil electrode for sealing chamber control

Description/design

Submersible sewage pump as submersible monobloc unit for stationary and portable wet well installation, as well as stationary dry well installation in intermittent operation.

Hydraulics

The outlet on the pressure side is designed as horizontal flange connection. The maximum possible dry matter is 8 % (depending on the hydraulics) Vortex impellers are used as the impeller shape.

Motor

The motors available are surface-cooled motors in single-phase version (with built-in operating capacitor) and three-phase version for the direct starting. The waste heat is given off directly to the surrounding fluid via the motor housing. These motors can operated immersed in continuous duty (S1) and non-immersed in short-time duty (S2) or intermittent operation (S3).

Furthermore the motors are equipped with thermal motor monitoring. This protects the motor windings against overheating. For units with single-phase AC motors this is built-in and switches automatically. I.e. if the motor is switched off due to overheating and then cools down it is automatically switched on again. Bimetallic strips are used for this as standard.

In addition the motor can be equipped with an external sealing chamber electrode for monitoring the oil barrier chamber. This signals if there is water ingress into the oil barrier chamber through the mechanical seal on the fluid side.

The connection cable has a length of 10 m as standard and is available in following versions:

  • With bare cable ends
  • With plug
  • With float switch and plug

Seal

There is a sealing chamber between the motor and hydraulics. This is filled with medicinal white oil. The fluid-side and motor-side seals are provided by two mechanical seals which rotate independently of each other.

Materials

  • Motor housing: 1.4301
  • Hydraulic housing: EN-GJL250
  • Impeller: EN-GJL250
  • Static seals: NBR
  • Sealing on pump side: SiC/SiC
  • Sealing on motor side: C/MgSiO4
  • Shaft end: Stainless steel 1.4021

Scope of delivery

  • Submersible sewage pump with 10 m cable
  • Cable version depending on the variant:
    • With bare cable ends (O)
    • With plug (P)
    • With float switch and plug (A)
  • Operating and maintenance manual

Accessories

  • Suspension unit or pump base
  • External sealing chamber monitoring for monitoring the oil barrier chamber
  • Chains
  • Switchgears, relays and plugs
  • Fixation sets with anchor bolts

Duty chart

Duty chart

Product

Design

Submersible

Single-channel impeller

-

Vortex impeller

Multi-channel impeller

-

Open multi-channel impeller

-

Macerator

-

Turbulator

-

Sealing chamber

Leakage chamber

-

Sealing by mechanical seal on motor side

Sealing by rotary shaft seal on motor side

-

Sealing by mechanical seal on fluid side

AC motor

Three-phase motor

Direct activation

Star-delta activation

-

FC operation

-

dry motor

Motor with oil cooling

-

Dry motor with closed-circuit cooling

-

Application

Wet well installation, stationary

Wet well installation, portable

Dry well installation, stationary

-

Dry well installation, portable

-

Equipment/function

Motor leakage monitoring

-

Sealing chamber monitoring

º

Leakage chamber monitoring

-

Motor temperature monitoring, bimetal

PTC motor temperature monitoring

-

Explosion protection

-

Float switch

Version A

Capacitor box for 1~230 V

-

Ready-to-plug

Materials

Pump housing

Cast iron

Impeller

Cast iron

Motor housing

Stainless steel

Downloads

Certification Booklet Wilo-Rexa FIT

Article Number 6069823
Edition 1701
Version number 04
Page format A4
Number of pages 4

PDF (207 kB)

Download

General overview

Edition 2017
Page format A4
Number of pages 72

PDF (46 MB)

Download

Wilo-Rexa FIT…

Article Number 6063547, 6074865
Edition 1706
Version number 03
Page format A4
Number of pages 32

PDF (2 MB)

Download

Product

PDF: Wilo-Rexa FIT

Configure

Page selection

Format selection

Optional information

You can enter any personal information that you want to be displayed in the header.

Download