Wilo-Zeox FIRST

Series description

Special features/product advantages

  • Extremely efficient hydraulics and highly-efficient IE3 motor with standard-mounted PTC sensor
  • Pump set standard mounted with rigid coupling between motor and hydraulics and with mechanical seal
  • Standard-mounted bypass flushing device guarantees a long service life for the mechanical seal
  • Clever flange positioning and stuffing box gland upon request
  • Bronze impellers upon request for high reliability

Design type

Non self-priming, highly efficient high-pressure multistage centrifugal pump

Application

  • Professional irrigation/agriculture
  • Water supply/pressure boosting
  • Fire fighting
  • Heating, air-conditioning, cooling

Equipment/function

  • Standard-equipped with highly efficient IE3 motor
  • Flushing device via bypass line for long service life
  • Stuffing box packing on request, can be replaced without removing the pump thanks to the exclusive "Twinner System" design.

Scope of delivery

  • Horizontal pump system with motor, coupling, baseplate and pump or
  • vertical pump system with motor, coupling and pump
  • Installation and operating instructions

Type key

Example:

Zeox FIRST V9004/A-75-2-S20-S6D6/B

Zeox FIRST

Non-self-priming, multistage high-pressure multistage centrifugal pump in sectional construction

V or H

Vertical or horizontal installation

90

Volume flow Q in m3/h

04

Number of impellers

A

Impeller type (V design)

75

Motor power (in kW)

2

2-pole motor

S20

Design variants: No specification = standard design, impellers made of bronze: L1, stuffing box packing: S20

S6D6

Variants with other flange and shaft alignments: No specification = standard alignment, SXDX

B

Index of technical development

Technical data

  • Mains connection 3~400 V, 50 Hz
  • Max. inlet pressure: 6 bar for vertical design, 16 bar for horizontal design
  • Max. fluid temperature range from -5 °C to +90 °C
  • Max. ambient temperature range from -10 °C to +40 °C
  • Max. operating pressure: 27 bar for vertical design, 55 bar for horizontal design DN 80 and 50 bar for horizontal design DN 100
  • Protection class: IP 55
  • Connections on pressure and suction side: DN 80 and DN 100 for vertical design,DN 65, DN 80, DN 100, DN 150 for horizontal design

Materials

  • Pump housing and coupling made of grey cast iron with high quality paintwork for high resistance to corrosion
  • Baseplate and motor support made of steel with high quality paintwork for high resistance to corrosion
  • Stage housing and guide vane apparatus made of grey cast iron and impellers made of grey cast iron with cataphoretic coating
  • Stage housing gaskets made of NBR
  • Plain bearing made of bronze
  • Shaft made of carbon steel or stainless steel
  • Rotating and stationary rings of the mechanical seal: Tungsten carbide/carbon
  • Mechanical gaskets made of NBR / PTFE
  • PTFE seals

Duty chart

Zeox FIRST

Downloads

General overview 2018 International version

Article Number 2200591
Edition 2018
Version number 1
Page format 209.9 x 297.0 mm
Number of pages 72

PDF (11 MB)

Download

Product

PDF: Wilo-Zeox FIRST

Configure

Page selection

Format selection

Optional information

You can enter any personal information that you want to be displayed in the header.

Download