Bypass line and pressure gauge for Helix and Medana CV1-L series
|Inlet connection||G ½|
|Outlet connection||G ½|
|Max. inlet pressure||25 bar|
|Max. operating pressure PN||25 bar|
|Max. fluid temperature||120 °C|
|For Wilo pumps||Helix V/VE/EXCEL 22../36../52 in 1.4409 (AISI316L)|
|Product description||Bypass line and pressure gauge for Helix and Medana CV1-L series|
|Minimum order quantity||1|
|Date of sales availability||2010-01-01|
|Packaging type||Skin packaging|
|Packaging property||Sales packaging|
|Pieces per pallet||1|
|Number per layer||1|
|Length with packaging||578 mm|
|Length L||495 mm|
|Height with packaging||25 mm|
|Height H||20 mm|
|Width with packaging||428 mm|
|Width W||345 mm|
|Gross weight, approx. m||1.7 kg|
|Net weight, approx. m||1.5 kg|
The use of bypass lines is always appropriate when the fluid contains large amounts of air or oxygen components or otherwise tends to emit gases.
As a result of the recirculation between pump head and pump suction side, an accumulation of air and/or oxygen is permanently discharged in the area of the mechanical shaft seal.
Typical areas of application are e.g. pumping condensate or pressure boosting with pumping from atmospherically ventilated break tanks.
The manometer shows the final pressure after the pump and enables conclusions to be made regarding its operating behaviour.
Scope of delivery
The set includes all components required for constructing the complete bypass line, including manometers.
|Net weight, approx.||1.5 kg|