Actun Opti QSI4.06-04 | Wilo

Actun Opti QSI4.06-04

Technical data
Tender text

Fully submersible, multistage submersible pump as a centrifugal pump in sectional construction with integrated non-return valve for pumping process water.

A corrosion-free, encapsulated permanent magnet motor with water-glycol filling and integrated frequency converter is used as the drive. The permanent magnet motor is hermetically sealed with enamel-insulated windings, resin-impregnated and with self-lubricating bearings.

The integrated frequency converter allows operation using a direct current source. The OPTI-QS pump is thus especially suitable for solar power operation. In applications with solar modules, the integrated software algorithm MPPT (“Maximum Power Point Tracking”) allows the available power to be matched in order to maximise the pumped volume flow (dynamic MPPT).

The unit can be installed in a vertical or horizontal position. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. The limit values for maximum fluid temperature, minimum flow velocity and voltage ranges must be adhered to.

Vertical installation is possible, depending on the design with or without cooling shroud. In cases of horizontal installation, a cooling shroud must always be provided.

Scope of delivery

  • Submersible pump with connection cable
  • Casting resin cable connector with integrated water level sensor
  • Installation and operating instructions
Pipe connection on the discharge side DNd Rp 1½
Maximum operating pressure p 40.0 bar
Max. sand content 50 g/m³
Protection class motor IP68
Max. immersion depth 150 m
Min. fluid temperature Tmin 3 °C
Max. fluid temperature Tmax 35 °C
Net weight, approx. m 8 kg
Motor data
Rated power P2 0.48 kW
Rated speed n 3600 1/min
Rated current IN 8 A
Activation type Direct online (DOL)
Motor diameter DM 90 mm
Connection cable length 2.5 m
Cable cross-section 4G1,5 mm²
Pump housing Stainless steel
Motor housing Stainless steel
Shaft Stainless steel
Impeller Stainless steel
Ordering information
Net weight, approx. m 8 kg
Brand Wilo
Product description Actun Opti QSI4.06-04
Article number 6082885

Installation and operating instructions

Wilo-Actun OPTI-QS...

Article Number 6084880
Edition 2019-02
Page format 148.2 x 209.9 mm
Number of pages 364
PDF (6 MB)

Certification booklet

Wilo-Actun OPTI-MS, Wilo-Actun OPTI-QS

Article Number 6089479
Edition 2020-09
Page format 209.9 x 297.0 mm
Number of pages 12
PDF (2 MB)

Certificate REACH (Documents)

REACH Regulation

Edition 2021-05
Page format 209.9 x 297.0 mm
Number of pages 4
PDF (212 KB)