DrainLift SANI-L.12T/1 | Wilo

DrainLift SANI-L.12T/1

Technical data
Tender text

Compact, ready for connection and fully submersible double pump lifting unit for pumping sewage containing faeces.

Gas- and watertight collection reservoir with collecting space that slopes at an angle and inspection opening with transparent cover. The inlets are freely configurable, level measurement is performed with an analogue output signal 4…20 mA. Pressure connection with attached non-return valve with inspection opening.

Drive via surface-cooled motor with thermal motor monitoring.

Pre-installed switchgear for automatic operation:

  • Collective fault signal with potential-free contact
  • Integrated and mains-independent alarm
  • Adjustable follow-up time
  • 1.5 m connection cable with attached plug

  • Lifting unit with switchgear and connection cable with plug
  • Flange connector DN 80/100
  • Collar DN 100 for pressure connection
  • Collar 75 mm for ventilation connection
  • Collar DN 50 for evacuation connection
  • Inlet set with hole saw 124 mmand gasket DN 100
  • Fixation material
  • Insulation mat
  • 9 V rechargeable battery
  • Operating and maintenance manual
Approved field of application
Fluid temperature T 3 °C
Max. fluid temperature, for short periods up to 5 min T 65 °C
Ambient temperature T 3 °C
Maximum operating pressure PN 3 bar
Max. permissible pressure in the pressure pipe P 1.5 bar
Product data
Gross volume of the tank V 122 l
Useable volume at 180 mm inlet height V 60 l
Useable volume at 250 mm inlet height V 76 l
Useable volume at 315 mm inlet height V 91 l
Sound-pressure level 70 dB
Operating mode (non-immersed) S2-15 min
Height H 571 mm
Length L 852 mm
Width W 635 mm
Diagonal dimension Diagonal axis 965 mm
Motor data
Mains connection 3~400 V, 50 Hz
Voltage tolerance ±10 %
Rated power P2 1.1 kW
Rated speed n 2893 1/min
Rated current IN 2.9 A
Insulation class F
Protection class motor IP68
Activation type Direct online (DOL)
Max. switching frequency t 60 1/h
Motor protection Bimetallic
Cable
Connection cable length 4 m
Cable type H07RN-F
Cable cross-section 6G1 mm²
Mains plug CEE 32A, 3P+N+PE, 6h
Materials
Tank PE
Pump housing PP-GF30
Impeller PP-GF30
Shaft Stainless steel
Gasket material NBR
Motor housing Stainless steel
Installation dimensions
Pipe connection on the suction side DN 100
Pipe connection on the discharge side DN 80
Connection venting Ø 75
Ordering information
Brand Wilo
Product description DrainLift SANI-L.12T/1
Net weight, approx. m 67 kg
Article number 2549908
Downloads

Installation and operating instructions

Wilo-DrainLift SANI-L

Article Number 2552854
Edition 2020-09
Page format 209.9 x 297.0 mm
Number of pages 32
PDF (4 MB)

Wilo-DrainLift SANI-L

Article Number 2553669
Edition 2020-09
Page format 209.9 x 297.0 mm
Number of pages 56
PDF (5 MB)

Wilo-Control MS-L

Article Number 2552612
Edition 2020-05
Page format 209.9 x 297.0 mm
Number of pages 40
PDF (3 MB)

Wilo-Control MS-L

Article Number 2552610
Edition 2020-05
Page format 209.9 x 297.0 mm
Number of pages 64
PDF (4 MB)

Certification booklet

Wilo-DrainLift SANI

Article Number 6088777
Edition 2020-06
Page format 209.9 x 297.0 mm
Number of pages 40
PDF (2 MB)

Certificate REACH (Documents)

REACH Regulation

Edition 2021-05
Page format 209.9 x 297.0 mm
Number of pages 4
PDF (212 KB)