Initial DRAIN 10-7 | Wilo

Initial DRAIN 10-7

Technical data
Tender text

Submersible pump as a monobloc unit with submersible motor, handle, 10 m electrical connection cable and integrated thermal overload protection. High operational reliability due to its motor protection with a lip seal. The pump with a connected float switch is suitable for pumping slightly contaminated water, rainwater, drainage water and washing water.

Product data
Impeller type General impeller
Free ball passage of the hydraulics 5 mm
Maximum operating pressure PN 3 bar
Max. immersion depth 5 m
Fluid temperature T 5 °C
Motor data
Mains connection 1~230 V, 50 Hz
Voltage tolerance ±10 %
Rated power P2 0.37 kW
Power consumption P1 max 0.55 kW
Rated current IN 3 A
Starting current I 0 A
Activation type Direct online (DOL)
Rated speed n 2800 1/min
Max. switching frequency t 60 1/h
Insulation class F
Protection class IP68
Operating mode (immersed) S1
Operating mode (non-immersed)
Cable
Connection cable length 10 m
Cable type H05RN-F
Cable cross-section 3G1 mm²
Mains plug Schuko
Type of connection cable Non-detachable
Equipment/function
Float switch no
Explosion protection type -
Motor protection PTO
Materials
Pump housing PP
Impeller PA-GF30
Shaft Stainless steel
Sealing on pump side BQ1PFF
Sealing on motor side BQ1PFF
Gasket material NBR
Motor housing Stainless steel
Installation dimensions
Pipe connection on the suction side DNs -
Pipe connection on the discharge side DNd Rp 1½
Ordering information
Brand Wilo
Product description Initial DRAIN 10-7
Net weight, approx. m 5 kg
Article number 4168021
Downloads

Installation and operating instructions

Wilo-Initial Drain

Article Number 4168381
Edition 2019-04
Page format 209.9 x 297.0 mm
Number of pages 80
PDF (3 MB)

Wilo-Initial Drain

Article Number 4168381
Edition 2021-11
Page format 209.9 x 297.0 mm
Number of pages 72
PDF (2 MB)

Certificate REACH (Documents)

REACH regulation

Edition 2021-10
Page format 209.9 x 297.0 mm
Number of pages 2
PDF (162 KB)