Rexa FIT-S03-112A/21T011-540/O
Article number: 6093112
Fully submersible grinder pump for stationary and portable wet well installation in intermittent operation.
For pumping in commercial areas of:
- Sewage containing faeces
- Wastewater (with small amounts of sand)
Sewage pumping according to (DIN) EN 12050
The pumps meet the requirements of EN 12050-1.
Sewage pump with radial macerator with double shear effect. Horizontal discharge port with flange and oval connection. Hydraulics housing and impeller made of grey cast iron; macerator made of hardened cutting steel. Surface-cooled 3~ motor with thermal motor monitoring. Oil-filled sealing chamber with two mechanical seals. Stainless steel motor housing. Detachable connection cable with bare cable ends.
| Operating Data | |
|---|---|
| Max. delivery head H | 28 m |
| Product data | |
|---|---|
| Impeller type | Two-channel impeller with macerator |
| Maximum operating pressure PN | 3 bar |
| Max. immersion depth | 7 m |
| Fluid temperature T | 3 °C |
| Motor data | |
|---|---|
| Motor design | Submersible motor – surface-cooled |
| Mains connection | 3~400 V, 50 Hz |
| Voltage tolerance | ±10 % |
| Power factor cos φ | 0.76 |
| Rated power P2 | 1.1 kW |
| Power consumption P1 max | 1.53 kW |
| Rated current IN | 2.9 A |
| Starting current I | 20.5 A |
| Activation type | Direct On Line (DOL) |
| Number of poles | 2 |
| Rated speed n | 2893 1/min |
| Max. switching frequency t | 60 1/h |
| Insulation class | F |
| Protection class | IP68 |
| Operating mode (immersed) | S1 |
| Operating mode (non-immersed) |
|
| Cable | |
|---|---|
| Connection cable length | 10 m |
| Cable type | H07RN-F |
| Cable cross-section | 6G1 mm² |
| Mains plug | no |
| Type of connection cable | Detachable |
| Equipment/function | |
|---|---|
| Float switch | no |
| Macerator | yes |
| Explosion protection type | - |
| Motor protection | Bimetall |
| Motor, leakage detection | no |
| Sealing chamber, leakage detection | optional |
| Leakage chamber, leakage detection | no |
| Materials | |
|---|---|
| Pump housing | Grey cast iron |
| Impeller | Grey cast iron |
| Shaft | Stainless steel |
| Sealing on pump side | QQPGG |
| Sealing on motor side | BXPFF |
| Gasket material | NBR |
| Motor housing | Stainless steel |
| Installation dimensions | |
|---|---|
| Pipe connection on the suction side DNs | - |
| Pipe connection on the discharge side DNd | DN 32/40 |
| Ordering information | |
|---|---|
| Brand | Wilo |
| Product description | Rexa FIT-S03-112A/21T011-540/O |
| Net weight, approx. m | 31 kg |
| Article number | 6093112 |
Installation and operating instructions
Wilo-Rexa FIT-S
| Article Number | 6092602 |
| Edition | 2022-03 |
| Page format | 209.9 x 297.0 mm |
| Number of pages | 24 |
PDF (5 MB)Certification booklet
Wilo-Rexa FIT
| Article Number | 6069823 |
| Edition | 2021-03 |
| Page format | 209.9 x 297.0 mm |
| Number of pages | 12 |
PDF (3 MB)Certificate REACH
REACH Regulation
| Edition | 2021-05 |
| Page format | 209.9 x 297.0 mm |
| Number of pages | 4 |
PDF (212 KB)