Highly efficient high-pressure multistage centrifugal pump in vertical design with in-line connections.

The non self-priming high-pressure multistage centrifugal pump has a particularly compact overall design. The pump shaft and the motor shaft of the IEC standard motor are connected by means of a clamp coupling. A separate lantern roller bearing ensures optimum admission of axial thrusts.

Intermediate bearings in the hydraulics and corrosion-resistant shaft due to stainless steel sleeve ensure a long service life.

The pump housing and lantern are cataphoretic-coated.

Special, permanently attached lifting eyes enable easy pump installation.

The pump is suitable for water distribution and pressure boosting, industrial recirculation systems, process water and closed cooling circuits. It can also be used in fire extinguishing systems, washing systems as well as for irrigation.

Special features/product advantages

• Efficiency-optimised, laser-welded 2D/3D hydraulics
• Corrosion-resistant impellers, guide vanes and stage housings
• Flow and degassing-optimised hydraulic parts
• Reinforced pump housing, flow and NPSH optimised
• Space-saving and easy maintenance due to the compact design
• Particularly sturdy coupling guard

Scope of delivery

• Wilo-Helix FIRST V high-pressure multistage centrifugal pump
• Installation and operating instructions

Design notes

• Motor protection is to be provided on request or onsite.
• In its standard position, the terminal box is aligned with the suction flange, but this can be changed if necessary.
• The Wilo-Helix FIRST V is equipped with a standard mechanical seal
• Round counter flange in cast iron or stainless steel, screws, nuts and gaskets are available as accessories
• Bypass sets are available as accessories.

Operating data

• Fluid media
  Water

Product data

• Min. fluid temperature T_min
  -20 °C
• Max. fluid temperature T_max
  120 °C
• Max. ambient temperature T_max
  40 °C
• Maximum operating pressure PN
  16 bar
• Maximum inlet pressure p inl
  10 bar
• Minimum efficiency index (MEI)
  0.7

Motor data

• Mains connection
  3~400 V, 50 Hz
• Voltage tolerance
  ±10 %
• Rated power P₂
  7.50 kW
• Rated current I_N
  13.70 A
• Rated speed n
  2900 rpm
• Power factor cos φ
  0.88
• Motor efficiency η_M 50%
  89.8
• Motor efficiency η_M 75%
  90.5
• Motor efficiency η_M 100%
  90.1
• Insulation class
  F
• Protection class
  IP55

Materials

• Pump housing
  EN-GJL-250
• Impeller
  1.4307
• Shaft
  1.4057
• Shaft seal
  Q1BE3GG
• Gasket material
  EPDM

Installation dimensions

• Pipe connection on the suction side RPS
  DN 65
• Pipe connection on the pressure side RPD
  DN 65

Information for order placements

• Brand
  Wilo
• Product description
  Helix FIRST V 3603/1-5/16/E/S/
• Net weight, approx. m
  89 kg
• Article number
  4183389