FLA-1 Helix V 1606 PN10 | Wilo
Similar to figure

FLA-1 Helix V 1606 PN10

Technical data
Tender text

Pressure boosting system to be connected indirectly as fully automatic single pump compact unit for fire extinguishing applications.

Consisting of:

Non-self-priming, multi-stage high-pressure multi-stage centrifugal pump in vertical design. Impellers and stage housing are made of stainless steel. The whole Helix series comes equipped with a user-friendly mechanical seal (X seal) in cartridge design and standard seal for easy maintenance. The flexible lantern design allows direct access to the mechanical shaft seal. IE2 standard motors, 3-phase, 2-pole.

Diaphragm pressure vessel (capacity 8 l), integrated non-return valve, shut-off valve on suction and pressure side (sealed in opened state), manometer, pressure switch for automatic system control.

Comes as standard with pump protection by means of minimum volume acceptance via bypass without auxiliary energy.

FLA switchgear for fire extinguishing systems in accordance with DIN 14462. Scope of functions and suitability in accordance with DIN 14462 have been proven by TÜV test report.

Switchgear integrated in steel sheeting housing.

With built-in motor protection only for signalling of faults. The motor protection is activated in test run.

Switch for Manual-Automatic mode Control of the pump by pressure switch in automatic mode; optionally expandable to up to eight sensors (in series connection), for example external on/off limit switch etc. (more than eight sensors on request). All sensor signals which could lead to the pump being started are monitored for wire breakage and short circuits.

System with programmable time switch for regular test run.

Dry-running protection relay, for example, for connection of low water float switch from the WILO FLA break tanks, electrodes, pressure switches etc.; low water status only for signalling of faults. Low water is activated in test run.

With signal lamps for operational readiness (green), pump ON (green), fault (red), pump request (white) as well as potential-free contacts for operational readiness and collective fault (possible as common signal) and pump ON.

Suitable for use in industrial and residential areas in accordance with the basic requirements of guideline 2004/108/EC (EMC guideline).

The system has been mounted on the base frame with wires and pipes are ready for connection.

Operating data
Max. delivery head Hmax 76.8 m
Number of pumps 1
Fluid temperature T 3 °C
Ambient temperature T 5 °C
Maximum operating pressure PN 10 bar
Maximum inlet pressure p inl 10 bar
Motor data
Mains connection 3~400 V, 50 Hz
Rated power P2 4 kW
Rated current IN 7.4 A
Power factor cos φ 0.87
Rated speed n 2900 1/min
Activation type Direct online (DOL)
Protection class motor IP55
Protection class switchgear IP54
Materials
Pump housing Stainless steel
Impeller Stainless steel
Shaft Stainless steel
Shaft seal Q1BE3GG
Gasket material EPDM
Pipework material Stainless steel
Installation dimensions
Pipe connection on the suction side DNs Rp 2
Pipe connection on the discharge side DNd R 1½
Ordering information
Brand Wilo
Product description FLA-1 Helix V 1606 PN10
Net weight, approx. m 131 kg
Article number 2534421
Downloads

Installation and operating instructions

Wilo-Helix V/ FIRST V 2-4-6-10-16

Article Number 4143727
Edition 1607
Page format A4
Number of pages 17
PDF (4 MB)

Wilo-Helix V/ FIRST V 22-36-52

Article Number 4120943
Edition 1603
Page format A4
Number of pages 1
ZIP (111 MB)

Wilo-Helix V/ FIRST V 22-36-52

Article Number 4120943
Edition 1603
Page format A4
Number of pages 15
PDF (4 MB)

Wilo-FLA

Article Number 2534409
Edition 1505
Page format A4
Number of pages 1
ZIP (5 MB)

Wilo-MultiVert MVI 16../32../52../70../95..

Article Number 2040502
Edition 1606
Page format A4
Number of pages 1
ZIP (7 MB)

Wilo-MultiVert MVI 16../32../52../70../95..

Article Number 2040502
Edition 1606
Page format A4
Number of pages 17
PDF (961 KB)

Wilo-Multivert MVI 16../32../52../70../95..

Article Number 2040502
Edition 1606
Page format A4
Number of pages 14
PDF (1 MB)

Wilo-FLA

Article Number 2534409
Edition 2019-08
Page format 209.9 x 297.0 mm
Number of pages 98
PDF (3 MB)

Wilo-Control-FLA

Article Number 2534411
Edition 2017-11
Page format 209.9 x 297.0 mm
Number of pages 48
PDF (2 MB)

Wilo-FLA

Article Number 2534409
Edition 2021-09
Page format 209.9 x 297.0 mm
Number of pages 32
PDF (2 MB)

Wilo-FLA

Article Number 2534409
Edition 2021-09
Page format 209.9 x 297.0 mm
Number of pages 96
PDF (4 MB)

Certificate REACH (Documents)

REACH Regulation

Edition 2021-05
Page format 209.9 x 297.0 mm
Number of pages 4
PDF (212 KB)
BIM/CAD

FLA-1 Helix V1606/K-01 PN10

DWG (2 MB)

FLA-1HELIX V1606/K-01 PN10

STP (3 MB)

FLA-1HELIX V1606/K-01 PN10

DWG (34 KB)

FLA-1HELIX V1606/K-01 PN10

DWG (42 KB)

FLA-1HELIX V1606/K-01 PN10

DWG (34 KB)