Jet HWJ 20 L 202 (1~230 V)
Centrifugal pump system with horizontal suction and vertical pressure port, consisting of:
Self-priming, single-stage jet pump with continuous motor pump shaft and direction of bidirectional mechanical seal. Directly flanged AC or three-phase motor with built-in thermal motor protection switch and condenser for AC version.
Pump control by means of control kit with diaphragm pressure vessel, pressure switch and pressure gauge (0 – 6 bar).
The pressure tank is equipped with a robust replaceable membrane made from the high performance material EPDM.
All parts that come into contact with the fluid are corrosion-proof.
Pump system ready for connection, pre-assembled and wired with 2 m cable and mains plug. Ideally suited for use in garden and hobby areas. Connection via terminal box for three-phase version.
|Pump housing||Stainless steel|
|Min. fluid temperature Tmin||5 °C|
|Max. fluid temperature Tmax||35 °C|
|Gross volume of the diaphragm expansion tank V||20 l|
|Maximum operating pressure p||10.0 bar|
|Pressure port||Rp 1|
|Max. ambient temperature Tmax||40 °C|
|Electromagnetic compatibility||EN 61000-6-1, -2, -3, -4|
|Rated current IN||4 A|
|Power factor cos φ||0.98|
|Rated speed n||2900 1/min|
|Mains connection||1~230 V, 50 Hz|
|Rated power P2||0.55 kW|
|Pipe connection on the suction side DNs||Rp 1|
|Pipe connection on the discharge side DNd||Rp 1|
|Net weight, approx. m||16 kg|
|Product description||Jet HWJ 20 L 202 (1~230 V)|