Data sheet
| Hydraulic data | |
|---|---|
| Maximum operating pressure PN | 6 bar |
| Max. permissible pressure in the pressure pipe P | 1.5 bar |
| Min. fluid temperature Tmin | 3 °C |
| Max. fluid temperature Tmax | 40 °C |
| Min. ambient temperature Tmin | 3 °C |
| Max. ambient temperature Tmax | 40 °C |
| Max. fluid temperature, for short periods up to 5 min. T | 65 °C |
| Sound-pressure level | 70 |
| Gross volume of the tank V | 64 l |
| Useable volume at 180 mm inlet height V | 29 l |
| Useable volume at 250 mm inlet height V | 39 l |
| Useable volume at 315 mm inlet height V | 48 l |
| Macerator | yes |
| Free ball passage of the hydraulics | 10 mm |
| Motor data | |
|---|---|
| Mains connection | 1~230 V, 50 Hz |
| Rated current IN | 9.3 A |
| Protection class | IP68 |
| Phase | 1 |
| Rated speed n | 2852 1/min |
| Number of poles | 2 |
| Activation type | Direct On Line (DOL) |
| Max. switching frequency t | 30 rph |
| Power consumption P1(Q=max.) of selected impeller * number of pumps P1 | 2100 W |
| Operating mode per pump | S3-10%, 120 s |
| Insulation class | F |
| Motor protection | Bimetall |
| Cable | |
|---|---|
| Connection cable length L | 4 m |
| Cable type | H07RN-F |
| Cable cross-section | 4G1 |
| Mains plug | CEE 32A, 1P+N+PE, 6h |
| Materials | |
|---|---|
| Tank | PE |
| Pump housing | Grey cast iron |
| Impeller | Grey cast iron |
| Shaft | Stainless steel |
| Gasket material | NBR |
| Motor housing | Stainless steel |
| Installation dimensions | |
|---|---|
| Diagonal dimension Diagonal axis | 802 mm |
| Pipe connection, suction side | DN/OD 40 (HT pipe) DN/OD 50 (HT pipe) DN/OD 63 (HT pipe) DN/OD 75 (HT pipe) DN/OD 90 (HT pipe) DN/OD 110 (HT pipe) DN/OD 160 (HT pipe) |
| Pipe connection, discharge side | DN 32 DN 40 Ø40mm |
| Connection venting | DN/OD 50 (HT pipe) |
| Connection for drainage pipe | DN/OD 50 (HT pipe) |
Equipment/function
| Scope of delivery | |
|---|---|
| Scope of delivery |
|
| Suitable for | |
|---|---|
| Suitable for draining bathtubs | Yes |
| Suitable for drainage of WC variants/urinals | Yes |
| Suitable for draining the dishwasher/sink | Yes |
| Suitable for draining showers | Yes |
| Suitable for draining the washbasin | Yes |
| Suitable for draining the washing machines | Yes |
Pump curves
Dimensions and dimensions drawings
DrainLift SANI CUT-L.27/L.30....
DrainLift SANI CUT-L, Inleat areas
Ordering information
| Product data | |
|---|---|
| Brand | Wilo |
| Product description | DrainLift SANI CUT-L.30/M523/1-CEE |
| Article number | 6095531 |
| EAN number | 4062679283760 |
| Colour | silver/black |
| Minimum order quantity | 1 |
| Date of sales availability | 2023-09-01 |
| Packaging | |
|---|---|
| Packaging type | Cardboard box |
| Packaging property | Transport packaging |
| Pieces per pallet | 1 |
| Number per layer | 1 |
| Dimension, weight | |
|---|---|
| Length with packaging | 800 mm |
| Length L | 696 mm |
| Height with packaging | 800 mm |
| Height H | 572 mm |
| Width with packaging | 600 mm |
| Width W | 539 mm |
| Gross weight, approx. m | 93 kg |
| Net weight, approx. m | 81 kg |
Compact, ready for connection, and fully submersible double pump lifting unit with macerator hydraulics for pumping sewage containing faeces.
Fluid
For the collection and pumping of these fluids in commercial areas:
- Sewage with faeces
Sewage pumping according to 12050
The lifting unit follows DIN EN 12050-1.
Construction
Gas- and watertight collection tank:
- Sloped floor at an angle
- Inspection opening with transparent cover
- Freely selectable inlets in the shown areas
- Level measurement with a level sensor 4 ... 20 mA
Macerator pump:
- Mounted directly on the collection tank
- Surface-cooled (air) motor with thermal motor monitoring
- Discharge port with non-return valve attached
Pre-wired "Control MS-L" switchgear for automatic operation:
- Collective fault signal with potential-free contact
- Integrated and mains-independent alarm
- Adjustable follow-up time
Scope of delivery
- Fully submersible lifting unit with macerator, switchgear, and connection cable including plug
- Pipe connection DN/OD 40
- HT double socket DN/OD 50 for ventilation connection
- HT double socket DN/OD 50 for drain connection
- Inlet set with hole saw 124 mm (5 in) and seal for HT pipe DN/OD 110
- Floor fixation set
- Noise insulation mat
- 9 V rechargeable battery
- Installation and operating instructions
| Operating data |
|---|
| Approved field of application | |
|---|---|
| Fluid temperature T | 3 °C |
| Max. fluid temperature, for short periods up to 5 min. T | 65 °C |
| Ambient temperature T | 3 °C |
| Maximum operating pressure PN | 6 bar |
| Max. permissible pressure in the pressure pipe P | 1.5 bar |
| Product data | |
|---|---|
| Gross volume of the tank V | 64 l |
| Useable volume at 180 mm inlet height V | 29 l |
| Useable volume at 250 mm inlet height V | 39 l |
| Useable volume at 315 mm inlet height V | 48 l |
| Sound-pressure level | 70 |
| Operating mode (non-immersed) | S3-10%, 120 s |
| Height H | 572 mm |
| Length L | 696 mm |
| Width W | 539 mm |
| Diagonal dimension Diagonal axis | 802 mm |
| Free ball passage of the hydraulics | 10 mm |
| Motor data | |
|---|---|
| Mains connection | 1~230 V, 50 Hz |
| Voltage tolerance | ±10 % |
| Rated power P2 | 1.5 kW |
| Rated speed n | 2852 1/min |
| Rated current IN | 9.3 A |
| Insulation class | F |
| Protection class motor | IP68 |
| Activation type | Direct On Line (DOL) |
| Max. switching frequency t | 30 rph |
| Operating mode per pump | S3-10%, 120 s |
| Motor protection | Bimetall |
| Cable | |
|---|---|
| Connection cable length L | 4 m |
| Cable type | H07RN-F |
| Cable cross-section | 4G1 |
| Mains plug | CEE 32A, 1P+N+PE, 6h |
| Materials | |
|---|---|
| Tank | PE |
| Pump housing | Grey cast iron |
| Impeller | Grey cast iron |
| Shaft | Stainless steel |
| Gasket material | NBR |
| Motor housing | Stainless steel |
| Installation dimensions | |
|---|---|
| Pipe connection, suction side | DN/OD 40 (HT pipe) DN/OD 50 (HT pipe) DN/OD 63 (HT pipe) DN/OD 75 (HT pipe) DN/OD 90 (HT pipe) DN/OD 110 (HT pipe) DN/OD 160 (HT pipe) |
| Pipe connection, discharge side | DN 32 DN 40 Ø40mm |
| Connection venting | DN/OD 50 (HT pipe) |
| Ordering information | |
|---|---|
| Brand | Wilo |
| Product description | DrainLift SANI CUT-L.30/M523/1-CEE |
| Net weight, approx. m | 81 kg |
| Article number | 6095531 |
Filtered by
Datasheet and documentation
Installation type
Mains-independent alarm signal (6) | |||
DrainAlarm | |||
DrainAlarm | 2545133 | ||
DrainAlarm FIRST | 2550526 | ||
Flash light | |||
24 VDC flash light, wall fixation | 2551612 | ||
1~230 VAC flash light, wall fixation | 2551613 | ||
Signal horn | |||
Signal horn 12-24 VDC | 2017208 | ||
Signal horn 1~230 V | 501459398 | ||
Stationary dry well installation (19) | |||
3-way cock | |||
3-way shut-off ball cock Rp 1½ | 2511607 | ||
Shut-off device kit | |||
Gate valve G1½, CW617N KIT | 6096494 | ||
Inlet seal | |||
DN/OD 40 inlet seal | 6096498 | ||
DN/OD 50 inlet seal | 6096499 | ||
DN/OD 63 inlet seal | 6100495 | ||
DN/OD 75 inlet seal | 6100494 | ||
DN/OD 90 inlet seal | 6100493 | ||
DN/OD 110 inlet seal | 2522672 | ||
DN/OD 160 inlet seal | 2552849 | ||
DN/OD 40 inlet seal kit | 6096492 | ||
DN/OD 50 inlet seal kit | 6096493 | ||
DN/OD 63 inlet seal kit | 6100492 | ||
DN/OD 75 inlet seal kit | 6100491 | ||
DN/OD 90 inlet seal kit | 6100490 | ||
DN/OD 110 inlet seal kit | 2521841 | ||
DN/OD 160 inlet seal kit | 2515145 | ||
Y-piece | |||
DN 32 Y-piece (DN/OD40 mm) for DrainLift SANI CUT-L | 6096483 | ||
DN 40 Y-piece (DN/OD50 mm) for DrainLift SANI CUT-L | 6096484 | ||
Diaphragm hand pump | |||
Diaphragm hand pump | 2060166 | ||
Mechanical accessories
Valves (2) | |||
3-way cock | |||
3-way shut-off ball cock Rp 1½ | 2511607 | ||
Shut-off device kit | |||
Gate valve G1½, CW617N KIT | 6096494 | ||
Installation/setup (17) | |||
Diaphragm hand pump | |||
Diaphragm hand pump | 2060166 | ||
Inlet seal | |||
DN/OD 40 inlet seal | 6096498 | ||
DN/OD 50 inlet seal | 6096499 | ||
DN/OD 63 inlet seal | 6100495 | ||
DN/OD 75 inlet seal | 6100494 | ||
DN/OD 90 inlet seal | 6100493 | ||
DN/OD 110 inlet seal | 2522672 | ||
DN/OD 160 inlet seal | 2552849 | ||
DN/OD 200 inlet seal | 2552850 | ||
DN/OD 40 inlet seal kit | 6096492 | ||
DN/OD 50 inlet seal kit | 6096493 | ||
DN/OD 63 inlet seal kit | 6100492 | ||
DN/OD 75 inlet seal kit | 6100491 | ||
DN/OD 90 inlet seal kit | 6100490 | ||
DN/OD 110 inlet seal kit | 2521841 | ||
DN/OD 160 inlet seal kit | 2515145 | ||
DN/OD 200 inlet seal kit | 2552851 | ||
Pipes / pipe joints (2) | |||
Y-piece | |||
DN 32 Y-piece (DN/OD40 mm) for DrainLift SANI CUT-L | 6096483 | ||
DN 40 Y-piece (DN/OD50 mm) for DrainLift SANI CUT-L | 6096484 | ||
Electrical accessories
Alarm signal (8) | |||
DrainAlarm | |||
DrainAlarm | 2545133 | ||
DrainAlarm FIRST | 2550526 | ||
Flash light | |||
1~230 VAC flash light, surface mounting | 2510429 | ||
24 VDC flash light, wall fixation | 2551612 | ||
1~230 VAC flash light, wall fixation | 2551613 | ||
Small alarm switchgear | |||
Small alarm switchgear KAS | 501534094 | ||
Signal horn | |||
Signal horn 12-24 VDC | 2017208 | ||
Signal horn 1~230 V | 501459398 | ||
With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.
Read moreCommissioning | |||
Commissioning Lifting stations (Double pump) | 2219413 | ||
Maintenance | |||
Maintenance BASIC Lifting stations (Double pump) | 2219542 | ||
Maintenance COMFORT Lifting stations (Double pump) | 2219516 | ||
Maintenance PREMIUM Lifting stations (Double pump) | 2219569 | ||
