Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Wilo-DrainLift SANI-S | Wilo

Wilo-DrainLift SANI-S

The smallest and lightest single pump lifting unit for detached and semi-detached homes.

Your advantages
Wilo-DrainLift SANI-S

The smallest and lightest single pump lifting unit for detached and semi-detached homes.

The compact Wilo-DrainLift SANI-S single faeces lifting unit is the smallest and lightest lifting unit adhering to EN 12050-1 (without macerator). Its quiet operation makes it ideal for use in detached and semi-detached houses.

As a result of its large pump volume, the freely selectable inlets and the optional version for particularly aggressive fluids, the Wilo-DrainLift SANI-S can be used flexibly and is easy to install. The spring-loaded non-return valve minimises the noise level at the end of each pumping cycle. Maintenance is made particularly easy by the user-friendly construction.


Your advantages

  • Very easy to install and transport due to space-saving compact design and very light weight
  • Large switching volume, thermal motor protection and a mains-independent alarm ensure operational stability
  • Corrosion-free design with engineering plastics and stainless steel guarantees high reliability
  • Freely selectable connections for maximum installation flexibility
  • A transparent tank cover and a cleaning opening in the non-return valve enable easy maintenance and cleaning
  • Spring-loaded non-return valve with a low noise level at the end of a pumping cycle for quiet operation

Environmentally friendly properties

  • Materials selected for long, stable product life with recycled plastic and biodegradable content.
  • Modular design with low variance of easily replaceable components for extended product life
  • Sustainable and carbon-neutral production and processes in our European factories
Series description
Wilo-DrainLift SANI-S

Design

Compact, ready for connection, and fully submersible single pump lifting unit for pumping sewage containing faeces.

Application

Pumping of sewage containing faeces:

  • In cases where sewage cannot be discharged directly into the sewer system via a natural downward slope
  • For backflow resistant drainage in cases where the discharge point is below the backflow level

Equipment/function

  • Switchgear with mains-independent alarm and collective fault signal
  • Ready-to-plug
  • Tank with inspection opening and transparent cover
  • Analogue level measurement (4 … 20 mA)
  • Non-return valve with inspection opening
  • Thermal motor monitoring with bimetallic sensor

Typekey

Example:

DrainLift SANI-S.11M/3C

DrainLift

Product family

SANI

Sewage lifting unit

S

Size

11

Max. delivery head

M

Mains connection:

  • M = 1~
  • T = 3~

3

Motor and switchgear version:

  • 1 = operating mode: S3, switchgear: Control MS-L
  • 3 = operating mode: S3, switchgear: Control EC-L

C

Version for aggressive fluids

Technical data

  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Operating mode: S3 10%
  • Fluid temperature: 3 ... 40 °C (37 ... 104 °F), max. 65 °C (149 °F) for 5 min
  • Max. ambient temperature: 3 ... 40 °C (37 ... 104 °F)
  • Tank volume: 47 l (12.5 US.liq.gal.)
  • Max. usable volume in the tank according to the inlet height*: 25 l/6.5 US.liq.gal. (180 mm*)/32 l/8.5 US.liq.gal. (250 mm*)
  • Discharge port: DN 80, PN 10
  • Inlet connection: DN 100/150 (110/160 mm)
  • Ventilation connection: DN 40 (50 mm)
  • Protection class of switchgear: IP54
  • Protection class of lifting unit: IP68 (2 mWG/7 d)
  • Noise level: 70 dB(A)

Materials

  • Motor housing: 1.4404 (AISI 316L)
  • Hydraulics: PP-GF30
  • Impeller: PP-GF30
  • Tank: PE
  • Non-return valve: PPS

Construction

Gas- and watertight collection tank with sloped floor at an angle and an inspection opening with transparent cover.Freely selectable inlets within the marked areas.Level measurement performed with an analogue output signal 4 ... 20 mA.Discharge port attached with a non-return valve including an inspection opening.

Surface-cooled motor with thermal motor monitoring.

Pre-installed switchgears for automatic operation:

Wilo-Control MS-L

  • Collective fault signal with potential-free contact
  • Integrated and mains-independent alarm
  • Adjustable follow-up time
  • 1.5 m connection cable with attached plug

Wilo-Control EC-L

  • Operation via display and icon-based, alphanumeric menu
  • Collective fault signal with potential-free contact
  • Individual fault signal with potential-free contact
  • ModBus interface
  • Integrated and mains-independent alarm
  • Adjustable follow-up time
  • 1.5 m connection cable with attached plug

Scope of delivery

  • Lifting unit with switchgear and connection cable with plug
  • Flange connector DN 80 (90 mm)/DN 100 (110 mm)
  • Collar DN 100 (110 mm) for discharge connection
  • HT double socket DN 40 (50 mm) for ventilation connection
  • HT double socket DN 40 (50 mm) for drain connection
  • Inlet set with hole saw 124 mm (5 in) and seal DN 100 (110 mm)
  • Floor fixation set
  • Noise insulation mat
  • 9 V rechargeable battery
  • Installation and operating instructions

Options

  • Version for aggressive fluids with ModBus connection
Documents

Installation and operating instructions

Wilo-DrainLift SANI-S

Article Number 2552852
Edition 2023-06
Number of pages 32
Language en
PDF (5 MB)

Wilo-Control MS-L

Article Number 2552612
Edition 2023-08
Number of pages 40
Language en
PDF (7 MB)

Wilo-Control EC-L

Article Number 2543252
Edition 2022-09
Number of pages 64
Language en
PDF (8 MB)

Certification booklet

Wilo-DrainLift SANI

Article Number 6088777
Edition 2020-06
Number of pages 40
Language language neutral
PDF (2 MB)

Group Statement

Group Statement REACH

Edition 2021-05
Number of pages 5
Language language neutral
PDF (279 KB)
Product selection
Number of results: 4
Mains plug
Mains connection