Wilo-DrainLift SANI-XL
The large double pump lifting unit for apartment blocks and commercial buildings.
The large double pump lifting unit for apartment blocks and commercial buildings.
With its particularly large pump volume and the selectable continuous duty and intermittent periodic duty motor operating modes, the Wilo-DrainLift SANI-XL large double faeces lifting unit is the ideal solution for quiet operation in large multi-residential buildings and commercial buildings with uncontrolled sewage intake. With a free ball passage of 44 mm or 65 mm, freely selectable inlets and the optional version for particularly aggressive fluids, it can be used flexibly and is easy to install. The spring-loaded non-return valve minimises the noise level at the end of each pumping cycle. Maintenance is made particularly easy by the user-friendly construction.
Recommended services
Your advantages
- Compact design and low weight make installation and transport easy
- A double-pump system, very large switching volume, thermal motor protection and a mains-independent alarm ensure high operational reliability
- Corrosion-free design with engineering plastics and stainless steel guarantees high reliability
- Freely selectable connections for maximum installation flexibility
- Universal use thanks to several variants with two free ball passage sizes (44/65 mm), operating mode for continuous operation or intermittent periodic duty and the version for aggressive fluids
- A transparent tank cover and a cleaning opening in the non-return valve enable easy maintenance and cleaning
- Spring-loaded non-return valve with a low noise level at the end of a pumping cycle for quiet operation
Environmentally friendly properties
- Materials selected for long, stable product life with recycled plastic and biodegradable content.
- Modular design with low variance of easily replaceable components for extended product life
- Sustainable and carbon-neutral production and processes in our European factories
Design
Ready for connection and fully submersible double pump lifting unit for pumping sewage containing faeces.
Application
Pumping of sewage containing faeces:
- In cases where sewage cannot be discharged directly into the sewer system via a natural downward slope
- For backflow resistant drainage in cases where the discharge point is below the backflow level
Equipment/function
- Switchgear with mains-independent alarm and collective fault signal
- Ready-to-plug
- Tank with inspection opening and transparent cover
- Analogue level measurement (4 … 20 mA)
- Non-return valve with inspection opening
- Thermal motor monitoring with bimetallic sensor
Typekey
Example: | DrainLift SANI-XL.13T/4C |
DrainLift | Product family |
SANI | Sewage lifting unit |
XL | Size |
13 | Max. delivery head |
T | Mains connection:
|
4 | Motor and switchgear version:
|
C | Version for aggressive fluids |
Technical data
- Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
- Operating mode: S3 10% or S1
- Fluid temperature: 3 ... 40 °C (37 ... 104 °F), max. 65 °C (149 °F) for 5 min
- Max. ambient temperature: 3 ... 40 °C (37 ... 104 °F)
- Tank volume: 358 l (94.5 US.liq.gal.)
- Max. usable volume in the tank according to the inlet height*: 148 l/39 US.liq.gal. (250 mm*)/182 l/48 US.liq.gal. (315 mm*)/286 l/75 US.liq.gal. (560 mm*)
- Discharge port: DN 80, PN 10
- Inlet connection: DN 100/150/200 (110/160/225 mm)
- Ventilation connection: DN 65 (75 mm)
- Protection class of switchgear: IP54
- Protection class of lifting unit: IP68 (2 mWG/7 d)
- Noise level: 70 dB(A)
Materials
- Motor housing: 1.4404 (AISI 316L)
- Hydraulics: PP-GF30
- Impeller: PP-GF30 or 1.4408 (AISI 316)
- Tank: PE
- Non-return valve: PPS
Construction
Gas- and watertight collection tank with sloped floor at an angle and an inspection opening with transparent cover.Freely selectable inlets within the marked areas.Level measurement performed with an analogue output signal 4 ... 20 mA.Discharge port attached with a non-return valve including an inspection opening.
Surface-cooled (air) or self-cooling (sheath flow cooling) motor with thermal motor monitoring.
Pre-installed switchgears for automatic operation:
Wilo-Control MS-L
- Collective fault signal with potential-free contact
- Integrated and mains-independent alarm
- Adjustable follow-up time
- 1.5 m connection cable with attached plug
Wilo-Control EC-L
- Operation via display and icon-based, alphanumeric menu
- Collective fault signal with potential-free contact
- Individual fault signal with potential-free contact
- ModBus interface
- Integrated and mains-independent alarm
- Adjustable follow-up time
- 1.5 m connection cable with attached plug
Scope of delivery
- Lifting unit with switchgear and connection cable with plug
- Flange connector DN 80 (90 mm)/DN 100 (110 mm)
- Collar DN 100 (110 mm) for discharge connection
- HT double socket DN 65 (75 mm) for ventilation connection
- HT double socket DN 40 (50 mm) for drain connection
- Inlet set with hole saw 175 mm (7 in) and seal DN 150 (160 mm)
- Floor fixation set
- 9 V rechargeable battery
- Installation and operating instructions
Options
- Version for aggressive fluids with ModBus connection
- Version for S1 operation (continuous duty) and with ModBus connection