Wilo-DrainLift XXL

Sewage lifting unit as double-pump system with two separate, dry-mounted pumps

Pumping of sewage containing faeces (according to DIN EN 12050-1) that cannot be returned to the sewer system via a natural downward slope, and backflow resistant drainage of discharge points below the backflow level (according to DIN EN 12056-1).

• Sheath current cooling
• Thermal motor monitoring and leakage detection
• Level control with level sensor
• Switchgear with mains-dependent alarm and Zener barrier in the housing
• Potential-free contact
• Pump cable detachable
• Hose connection for venting
• Hose connection for diaphragm hand pump
• Fixation material

• Mains connection 3~400 V, 50 Hz
• Power consumption P1 from 2.3 to 10.0 kW, depending on type
• Cable length from system to switchgear 10 m
• Operating mode S1, S3
• Fluid temperature max. 40 °C, for short periods up to 65 °C
• Ambient temperature max. 40 °C
• Free ball passage 78 mm to 95 mm, depending on type
• Pressure port DN 80 or DN 100, depending on type
• Inlet connection 3 x DN 100/150, 1 x DN 100
• Ventilation connection DN 70 mm
• Min. suction head (installation level to middle of inlet) 700 mm
• Protection class (without switchgear) IP 68
• Gross tank volume 400/800 l
• Switching volume 200/400 l

• Motor housing: stainless steel 1.4404 (AISI 316L)
• Hydraulics: PUR plastic
• Tank: PE plastic

Fully submersible sewage lifting unit, ready for connection (flooding height: 2 mWS, overflow time: 7 days), with a gas- and watertight collection tank. Equipped with two sewage pumps of the Wilo-Drain TP 80 or TP 100 series (material: Inox and composite). Easy handling due to low total weight of system, e.g. double system with TP 80 pump only 160 kg (heaviest individual weight: pump 62 kg). Optimal tank drainage due to deep extraction by suction.

Important: The switchgear is not submersible and must therefore be arranged in such a way that it is safe from flooding.

• Microprocessor-controlled switchgear with automatic duty cycling, standby and peak load operation, potential-free contacts and indicator lights for operation and malfunctions for each pump.
• Elastic hose connection for ventilation DN 70.
• Elastic hose connection for connecting a diaphragm hand pump. Kit for connecting the tank with a pump (including ventilation flange with hose).

• Mains connection 3~400 V, 50 Hz
• Power consumption P1 from 2.3 to 10.0 kW, depending on type
• Cable length from system to switchgear 10 m
• Operating mode S1, S3
• Fluid temperature max. 40 °C, for short periods up to 65 °C
• Ambient temperature max. 40 °C
• Free ball passage 78 mm to 95 mm, depending on type
• Pressure port DN 80 or DN 100, depending on type
• Inlet connection 3 x DN 100/150, 1 x DN 100
• Ventilation connection DN 70 mm
• Min. suction head (installation level to middle of inlet) 700 mm
• Protection class (without switchgear) IP 68
• Gross tank volume 400/800 l
• Switching volume 200/400 l

• Motor housing: stainless steel 1.4404 (AISI 316L)
• Hydraulics: PUR plastic
• Tank: PE plastic

Fully submersible sewage lifting unit, ready for connection (flooding height: 2 mWS, overflow time: 7 days), with a gas- and watertight collection tank. Equipped with two sewage pumps of the Wilo-Drain TP 80 or TP 100 series (material: Inox and composite). Easy handling due to low total weight of system, e.g. double system with TP 80 pump only 160 kg (heaviest individual weight: pump 62 kg). Optimal tank drainage due to deep extraction by suction.

Important: The switchgear is not submersible and must therefore be arranged in such a way that it is safe from flooding.

• Microprocessor-controlled switchgear with automatic duty cycling, standby and peak load operation, potential-free contacts and indicator lights for operation and malfunctions for each pump.
• Elastic hose connection for ventilation DN 70.
• Elastic hose connection for connecting a diaphragm hand pump. Kit for connecting the tank with a pump (including ventilation flange with hose).