Rexa FIT-V06-214A/21M015-523/A | Wilo

Rexa FIT-V06-214A/21M015-523/A

Article number: 6098171

Hydraulic data
Maximum operating pressure p	1.3 bar
Discharge port	DN 65/80
Free ball passage of the hydraulics	65 mm
Hydraulics type	Vortex impeller
Max. immersion depth	7 m
Max. delivery head H_max	11.9 m
Max. volume flow Q_max	45.0 m³/h
Min. fluid temperature T_min	3 °C
Max. fluid temperature T_max	40 °C
Min. ambient temperature T_min	3 °C
Max. ambient temperature T_max	40 °C

Motor data
Motor Identifier	S 13.M-08/EAD1-2-M 1,5kW
Mains connection	1~230 V, 50 Hz
Voltage tolerance	±10 %
Rated power P₂	1.5 kW
Power consumption P_{1 max}	2.10 kW
Rated current I_N	9.3 A
Starting current I	29 A
Operating mode (immersed)	S1
Operating mode (non-immersed)	S2-15 min
Rated speed n	2852 1/min
Power factor cos φ₁₀₀	0.98
Activation type	Direct On Line (DOL)
Number of poles	2
Max. switching frequency t	60 1/h
Insulation class	F
Protection class motor	IP68

Cable
Connection cable length L	10 m
Cable type	H07RN-F
Cable cross-section	3G1 mm²
Type of connection cable	Detachable

Equipment/function
Mains plug	CEE 7/7 (Schuko)
Float switch	yes
Macerator	no
Explosion protection type	-
Motor protection	Bimetall
Motor, leakage detection	no
Sealing chamber, leakage detection	optional
Leakage chamber, leakage detection	no

Materials
Pump housing	Grey cast iron
Impeller	Grey cast iron
Shaft	Stainless steel
Sealing on pump side	Silicon carbide
Sealing on motor side	NBR
Gasket material	NBR
Motor housing	Stainless steel

Installation dimensions
Inlet connection	DN 65
Outlet connection	DN 65/80

Product data
Brand	Wilo
Product description	Rexa FIT-V06-214A/21M015-523/A
Article number	6098171
EAN number	4062679388472
Colour	silver/black
Minimum order quantity	1
Date of sales availability	2024-10-01

Packaging
Packaging type	Cardboard box
Packaging property	Transport packaging
Pieces per pallet	1
Number per layer	1

Dimension, weight
Length with packaging	400 mm
Length L	250 mm
Height with packaging	805 mm
Height H	553 mm
Width with packaging	300 mm
Width W	200 mm
Gross weight, approx. m	36 kg
Net weight, approx. m	34 kg

Fully submersible sewage pump for stationary and transportable wet well installation for pumping wastewater and sewage containing faeces (within the scope of validity of EN 12050-1). Hydraulics housing and impeller made of cast iron, motor housing made of stainless steel. The sealing on the fluid and on the motor side is performed by two bidirectional mechanical seals. Surface-cooled motor in single-phase current version with integrated operating capacitor, sealing chamber, and self-switching thermal motor monitoring. Detachable connection cable with shockproof plug and float switch.

Operating Data

Product data
Hydraulics type	Vortex impeller
Free ball passage of the hydraulics	65 mm
Maximum operating pressure PN	1 bar
Max. immersion depth	7 m
Fluid temperature T	3 °C

Motor data
Motor design	Submersible motor – surface-cooled
Mains connection	1~230 V, 50 Hz
Voltage tolerance	±10 %
Power factor cos φ₁₀₀	0.98
Rated power P₂	1.5 kW
Power consumption P_{1 max}	2.10 kW
Rated current I_N	9.3 A
Starting current I	29 A
Activation type	Direct On Line (DOL)
Number of poles	2
Rated speed n	2852 1/min
Max. switching frequency t	60 1/h
Insulation class	F
Protection class	IP68
Operating mode (immersed)	S1
Operating mode (non-immersed)	S2-15 min S3-10%

Cable
Connection cable length L	10 m
Cable type	H07RN-F
Cable cross-section	3G1 mm²
Mains plug	CEE 7/7 (Schuko)
Type of connection cable	Detachable

Equipment/function
Float switch	yes
Macerator	no
Explosion protection type	-
Motor protection	Bimetall
Motor, leakage detection	no
Sealing chamber, leakage detection	optional
Leakage chamber, leakage detection	no

Materials
Pump housing	Grey cast iron
Impeller	Grey cast iron
Shaft	Stainless steel
Sealing on pump side	QQPGG
Sealing on motor side	BXPFF
Gasket material	NBR
Motor housing	Stainless steel

Installation dimensions
Pipe connection on the suction side DNs	DN 65
Pipe connection on the discharge side DNd	DN 65/80

Ordering information
Brand	Wilo
Product description	Rexa FIT-V06-214A/21M015-523/A
Net weight, approx. m	34 kg
Article number	6098171

Installation and operating instructions

Wilo-Rexa FIT

Article Number	6063547
Edition	2019-02
Number of pages	32
Language	en

PDF (2 MB)

Group Statement

Group Statement REACH

Edition	2021-05
Number of pages	5
Language	language neutral

PDF (327 KB)

Level control with float switch (10) Level measurement using a level sensor with various measurement ranges, including high water alarm and dry-running protection.
Switchgear Wilo-Control MS-Lift
Switchgear Wilo-Control MS-Lift	MS-L-1x4kW-DOL	2539741
	Microcontroller-controlled switchgear for level-dependent control of a submersible pump with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers. Functions “Drain” operating mode: For draining sewage chambers in water disposal Configurable overload protection Thermal motor monitoring Pump kick function for 2 sec Adjustable follow-up time up to 120 sec Direction of rotation monitoring High water alarm with forced switch-on of the connected pump Fault memory of the last fault Equipment Lockable main switch Control panel with buttons Display of the current operating or fault conditions via LED Configurable electronic motor current monitoring Configuration of individual functions using dip switches and potentiometers Integrated alarm buzzer, mains-independent via 9 V battery (optionally available as accessory) Inputs 1x digital input for float switches (pump on/off) 1x digital input for high water signal with float switch (high water alarm) 1x input for thermal winding monitor with bimetallic temperature sensor – connection of PTC sensors is not possible! Outputs 1x potential-free contact for the collective fault signal (SSM) Notice: Power supply must be provided by the customer! Scope of delivery Switchgear Installation and operating instructions Configuration Attention: Signal transmitters are to be provided on-site. Switchgears are not protected against explosions and may be used only outside hazardous areas. Signal transmitters within hazardous areas must be connected through an intrinsically safe circuit, e.g. a Zener barrier or Ex cut-off relay. The direct connection of pumps within hazardous areas is not possible!
	MS-L-2x4kW-DOL	2539745
	Switchgear with microcontroller for level-dependent control of two submersible pumps with float switch for level measurement. The parameterisation is carried out using DIP switches and potentiometers. Functions “Drain” operating mode: For draining sewage chambers in water disposal Configurable overload protection Thermal motor monitoring Pump kick function for 2 sec Adjustable follow-up time up to 120 sec Pump cycling after every run Direction of rotation monitoring High water alarm with forced switch-on of the connected pumps Fault memory of the last fault Equipment Lockable main switch Control panel with buttons Display of the current operating or fault conditions via LED Configurable electronic motor current monitoring Setting of individual functions using DIP switches and potentiometers Integrated alarm buzzer, mains-independent via 9 V battery (optionally available as accessory) Inputs 2x digital inputs for float switches (pump on/off) 1x digital input for high water signal with float switch (high water alarm) 2x inputs for thermal winding protection monitoring with bimetallic temperature sensor - connection of PTC sensors is not possible! Outputs 1x potential-free contact for the collective fault signal (SSM) 1x potential-free contact for the high water alarm Notice: Power supply must be provided by the customer! Scope of delivery Switchgear Installation and operating instructions Configuration Attention: Signal transmitters are to be provided on-site. Switchgears are not protected against explosions and may only be used outside hazardous areas. Signal transmitters within hazardous areas must be connected through an intrinsically safe circuit, e.g. a Zener barrier or Ex cut-off relay. The direct connection of pumps within hazardous areas is not possible!
Battery 9V,200mA
Battery 9V,200mA	NiMh rechargeable battery, 9 V/200 mAh	2522850
Battery 9V,200mA	Rechargeable battery to be installed in the switchgears Wilo-control MS-L and EC-L for a mains-independent alarm. Construction: NiMh Power: 9 V, 200 mAh
Float switch MS1
Float switch MS1	Float switch MS1 with 10 m cable	2004593
Float switch MS1	Float switches for level control devices as min./max switches for fluids that are aggressive or contain faeces, floats with the fluid and switches when tilted. Because of its construction and switching point, the float switch can exhibit only a very small hysteresis. This property cannot be changed, not even the length of the cable. In order to use the float switch, a switchgear with adjustable run-on time must be used. Switching: up "ON"/down "OFF" When used in potentially explosive areas an Ex cut-off relay must be provided for the connection!
Float switch WA
Float switch WA	Float switch WA65 with 10 m cable	503211893
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF
	Float switch WA65 with 20 m cable	2004431
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF
	Float switch WA65 with 30 m cable	2004432
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF
	Float switch WA65 with 5 m cable	503211390
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF
Signal horn
Signal horn	Signal horn 1~230 V	501459398
Signal horn	Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer!
Flash light
Flash light	Flash light 1~230 VAC	2551613
Flash light	Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer!
Level control with level sensor (17) Level measurement using a level sensor with various measurement ranges, including high water alarm and dry-running protection. The breakdown barrier and the Ex cut-off relays are not required except for the connection of signal transmitters in potentially explosive areas! These can also be dispensed with when the SC-L..-Ex switchgear is used!
Switchgear Wilo-Control EC-Lift
Switchgear Wilo-Control EC-Lift	EC-L-1x12A-MT34-DOL-WM	2543210
	Switchgear with microcontroller for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating knob. Functions Two different operating modes for a broad field of application: “Drain” operating mode: For draining sewage chambers “Fill” operating mode: For filling water tanks and rainwater storage tanks Configurable overload protection Thermal motor monitoring Pump kick function Adjustable follow-up time Direction of rotation monitoring High water alarm with forced switch-on of the connected pump Dry-running protection Fault memory for 10 error messages including the type of fault Operating mode “Ex” for loading preset values for “Ex” applications (please note information given under “Configuration”!) Equipment Display of the current operating status and data as well as faults, using the LCD display and LEDs Symbol-based menu navigation Configuration of operating parameters and operation via operating knob Main switch Remote access via ModBus Integrated alarm buzzer Inputs 1x analogue precision input 4 – 20 mA for level control with level sensor 2x digital inputs for level control with float switch 1x digital input for low water level with float switch (dry-running protection) 1x digital input for high water signal with float switch (high water alarm) 1x input for thermal winding monitor with bimetallic temperature sensor – connection of PTC sensors is not possible! 1x input for connecting moisture sensors (e.g.: Motor compartment leakage or sealing chamber monitoring) 1x digital input for External On/Off for remote activation and deactivation of automatic mode Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the individual run signal (EBM) per pump 1x potential-free contact* for the individual fault signal (ESM) per pump 1x 24 VDC output for connecting an external alarm signal 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Configuration Signal transmitter to be provided on-site. Switchgears are not protected against explosions and may only be used outside hazardous areas. Signal transmitters within hazardous areas must be connected through an intrinsically safe circuit, e.g. Zener barrier or Ex cut-off relay. Pumps within hazardous areas can be directly connected. Notice! Printed installation and operating instructions have been enclosed with the product in the following languages: DE, EN, FR, PL, RU. All language versions have been saved as PDF files on an enclosed USB stick or can be downloaded at https://qr.wilo.com/1401. A notebook or tablet with Adobe Reader is required for installing and commissioning.
	EC-L-1x12A-MT34-DOL-WM-EMS	2543211
	Switchgear with microcontroller for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating knob. Functions Two different operating modes for a broad field of application: “Drain” operating mode: For draining sewage chambers “Fill” operating mode: For filling water tanks and rainwater storage tanks Configurable overload protection Thermal motor monitoring Pump kick function Adjustable follow-up time Direction of rotation monitoring High water alarm with forced switch-on of the connected pump Dry-running protection Fault memory for 10 error messages including the type of fault Operating mode “Ex” for loading preset values for “Ex” applications (please note information given under “Configuration”!) Equipment Display of the current operating status and data as well as faults, using the LCD display and LEDs Symbol-based menu navigation Configuration of operating parameters and operation via operating knob Remote access via ModBus Integrated alarm buzzer Inputs 1x analogue precision input 4 – 20 mA for level control with level sensor 2x digital inputs for level control with float switch 1x digital input for low water level with float switch (dry-running protection) 1x digital input for high water signal with float switch (high water alarm) 1x input for thermal winding monitor with bimetallic temperature sensor – connection of PTC sensors is not possible! 1x input for connecting moisture sensors (e.g.: motor compartment leakage or sealing chamber monitoring) 1x digital input for External On/Off for remote activation and deactivation of automatic mode Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the individual run signal (EBM) per pump 1x potential-free contact* for the individual fault signal (ESM) per pump 1x 24 VDC output for connecting an external alarm signal 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Configuration Signal transmitter to be provided on-site. Switchgears are not protected against explosions and may only be used outside hazardous areas. Signal transmitters within hazardous areas must be connected through an intrinsically safe circuit, e.g. Zener barrier or Ex cut-off relay. Pumps within hazardous areas can be directly connected. Notice! Printed installation and operating instructions have been enclosed with the product in the following languages: DE, EN, FR, PL, RU. All language versions have been saved as PDF files on an enclosed USB stick or can be downloaded at https://qr.wilo.com/1401. A notebook or tablet with Adobe Reader is required for installing and commissioning.
	EC-L-2x12A-MT34-DOL-WM	2543220
	Switchgear with microcontroller for level-dependent control of two submersible pumps with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating knob. Functions Two different operating modes for a broad field of application: “Drain” operating mode: For draining sewage chambers “Fill” operating mode: For filling water tanks and rainwater storage tanks Configurable overload protection Thermal motor monitoring Pump kick function Adjustable follow-up time Automatic pump alteration Service life optimisation Standby pump Automatic fault-actuated switchover Direction of rotation monitoring High water alarm with forced switch-on of the connected pumps Dry-running protection Fault memory for 10 error messages including the type of fault Operating mode “Ex” for loading preset values for “Ex” applications (please note information given under “Configuration”!) Equipment Display of the current operating status and data as well as faults, using the LCD display and LEDs Symbol-based menu navigation Main switch Configuration of operating parameters and operation via operating knob Remote access via ModBus Integrated alarm buzzer Inputs 1x analogue precision input 4 – 20 mA for level control with level sensor 3x digital inputs for level control with float switch 1x digital input for low water level with float switch (dry-running protection) 1x digital input for high water signal with float switch (high water alarm) 2x inputs for thermal winding protection monitoring with bimetallic temperature sensor - connection of PTC sensors is not possible! 2x inputs for connecting moisture sensors (e.g.: Motor compartment leakage or sealing chamber monitoring) 1x digital input for External On/Off for remote activation and deactivation of automatic mode Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the individual run signal (EBM) per pump 1x potential-free contact* for the individual fault signal (ESM) per pump 1x 24 VDC output for connecting an external alarm signal 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Configuration Signal transmitter to be provided on-site. Switchgears are not protected against explosions and may only be used outside hazardous areas. Signal transmitters within hazardous areas must be connected through an intrinsically safe circuit, e.g. Zener barrier or Ex cut-off relay. Pumps within hazardous areas can be directly connected. Notice! Printed installation and operating instructions have been enclosed with the product in the following languages: DE, EN, FR, PL, RU. All language versions have been saved as PDF files on an enclosed USB stick or can be downloaded at https://qr.wilo.com/1401. A notebook or tablet with Adobe Reader is required for installing and commissioning.
	EC-L-2x12A-MT34-DOL-WM-EMS	2543221
	Switchgear with microcontroller for level-dependent control of two submersible pumps with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating knob. Functions Two different operating modes for a broad field of application: “Drain” operating mode: For draining sewage chambers “Fill” operating mode: For filling water tanks and rainwater storage tanks Configurable overload protection Thermal motor monitoring Pump kick function Adjustable follow-up time Automatic pump alteration Service life optimisation Standby pump Automatic fault-actuated switchover Direction of rotation monitoring High water alarm with forced switch-on of the connected pumps Dry-running protection Fault memory for 10 error messages including the type of fault Operating mode “Ex” for loading preset values for “Ex” applications (please note information given under “Configuration”!) Equipment Display of the current operating status and data as well as faults, using the LCD display and LEDs Symbol-based menu navigation Configuration of operating parameters and operation via operating knob Remote access via ModBus Integrated alarm buzzer Inputs 1x analogue precision input 4 – 20 mA for level control with level sensor 3x digital inputs for level control with float switch 1x digital input for low water level with float switch (dry-running protection) 1x digital input for high water signal with float switch (high water alarm) 2x inputs for thermal winding protection monitoring with bimetallic temperature sensor - connection of PTC sensors is not possible! 2x inputs for connecting moisture sensors (e.g.: Motor compartment leakage or sealing chamber monitoring) 1x digital input for External On/Off for remote activation and deactivation of automatic mode Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the individual run signal (EBM) per pump 1x potential-free contact* for the individual fault signal (ESM) per pump 1x 24 VDC output for connecting an external alarm signal 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Configuration Signal transmitter to be provided on-site. Switchgears are not protected against explosions and may only be used outside hazardous areas. Signal transmitters within hazardous areas must be connected through an intrinsically safe circuit, e.g. Zener barrier or Ex cut-off relay. Pumps within hazardous areas can be directly connected. Notice! Printed installation and operating instructions have been enclosed with the product in the following languages: DE, EN, FR, PL, RU. All language versions have been saved as PDF files on an enclosed USB stick or can be downloaded at https://qr.wilo.com/1401. A notebook or tablet with Adobe Reader is required for installing and commissioning.
	EC-L-3x12A-MT34-DOL-WM	2543230
	Switchgear with microcontroller for level-dependent control of three submersible pumps using analogue signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating knob. Functions Two different operating modes for a broad field of application: “Drain” operating mode: For draining sewage chambers “Fill” operating mode: For filling water tanks and rainwater storage tanks Configurable overload protection Thermal motor monitoring Pump kick function Adjustable follow-up time Automatic pump alteration Service life optimisation Standby pump Automatic fault-actuated switchover Direction of rotation monitoring High water alarm with forced switch-on of the connected pumps Dry-running protection Fault memory for 10 error messages including the type of fault Operating mode “Ex” for loading preset values for “Ex” applications (please note information given under “Configuration”!) Equipment Display of the current operating status and data as well as faults, using the LCD display and LEDs Symbol-based menu navigation Main switch Configuration of operating parameters and operation via operating knob Remote access via ModBus Integrated alarm buzzer Inputs 1x analogue precision input 4 – 20 mA for level control with level sensor 3x digital inputs for level control with float switch (max. 2 pumps) 1x digital input for low water level with float switch (dry-running protection) 1x digital input for high water signal with float switch (high water alarm) 3x inputs for thermal winding monitor with bimetallic temperature sensor, connection of PTC sensors is not possible! 3x inputs for connecting moisture sensors (e.g.: Motor compartment leakage or sealing chamber monitoring) 1x digital input for External On/Off for remote activation and deactivation of automatic mode Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the individual run signal (EBM) per pump 1x potential-free contact* for the individual fault signal (ESM) per pump 1x 24 VDC output for connecting an external alarm signal 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Configuration Signal transmitter to be provided on-site. Switchgears are not protected against explosions and may only be used outside hazardous areas. Signal transmitters within hazardous areas must be connected through an intrinsically safe circuit, e.g. Zener barrier or Ex cut-off relay. Pumps within hazardous areas can be directly connected. Notice! Printed installation and operating instructions have been enclosed with the product in the following languages: DE, EN, FR, PL, RU. All language versions have been saved as PDF files on an enclosed USB stick or can be downloaded at https://qr.wilo.com/1401. A notebook or tablet with Adobe Reader is required for installing and commissioning.
Battery 9V,200mA
Battery 9V,200mA	NiMh rechargeable battery, 9 V/200 mAh	2522850
Battery 9V,200mA	Rechargeable battery to be installed in the switchgears Wilo-control MS-L and EC-L for a mains-independent alarm. Construction: NiMh Power: 9 V, 200 mAh
Level sensor
Level sensor	Level sensor 0-1.0 mWC with 10 m cable	6088842
	Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection!
	Level sensor 0-1.0 mWC with 30 m cable	6088841
	Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection!
	Level sensor 0-1.0 mWC with 50 m cable	6088840
	Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection!
	Level sensor 0-2.5 mWC with 10 m cable	6088839
	Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection!
	Level sensor 0-2.5 mWC with 30 m cable	6088837
	Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection!
	Level sensor 0-2.5 mWC with 50 m cable	6088836
	Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection!
Cable clamp
Cable clamp	Cable clamp	2519927
Cable clamp	Cable clamp for fastening a signal transmitter in the pump chamber. The clamp is fixed in the pump chamber with a hook; the cable of the signal transmitter is clamped and fixed via the intrinsic weight of the signal transmitter.
Signal horn
Signal horn	Signal horn 1~230 V	501459398
	Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer!
	Signal horn 12-24 VDC	2017208
	Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (92 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer!
Flash light
Flash light	Flash light 1~230 VAC	2551613
	Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer!
	Flash light 24 VDC	2551612
	Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer!
Level control with dynamic pressure system (9) Level measurement via an open dynamic pressure system with the option of a separate dynamic pressure bell for the high water level.
Switchgear Wilo-Control EC-Lift
Switchgear Wilo-Control EC-Lift	EC-L-1x12A-MT34-DOL-WM-EMS-IPS	2543212
	Switchgear with microcontroller for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating knob. Functions Two different operating modes for a broad field of application: “Drain” operating mode: For draining sewage chambers “Fill” operating mode: For filling water tanks and rainwater storage tanks Configurable overload protection Thermal motor monitoring Pump kick function Adjustable follow-up time Direction of rotation monitoring High water alarm with forced switch-on of the connected pump Dry-running protection Fault memory for 10 error messages including the type of fault Operating mode “Ex” for loading preset values for “Ex” applications (please note information given under “Configuration”!) Equipment Display of the current operating status and data as well as faults, using the LCD display and LEDs Symbol-based menu navigation Configuration of operating parameters and operation via operating knob Remote access via ModBus Integrated alarm buzzer Integrated pressure transducer Inputs 1x analogue precision input 4 – 20 mA for level control with level sensor 2x digital inputs for level control with float switch 1x input for level control with a dynamic pressure bell 1x digital input for low water level with float switch (dry-running protection) 1x digital input for high water signal with float switch (high water alarm) 1x input for thermal winding monitor with bimetallic temperature sensor – connection of PTC sensors is not possible! 1x input for connecting moisture sensors (e.g.: Motor compartment leakage or sealing chamber monitoring) 1x digital input for External On/Off for remote activation and deactivation of automatic mode Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the individual run signal (EBM) per pump 1x potential-free contact* for the individual fault signal (ESM) per pump 1x 24 VDC output for connecting an external alarm signal 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Configuration Signal transmitter to be provided on-site. Switchgears are not protected against explosions and may only be used outside hazardous areas. Signal transmitters within hazardous areas must be connected through an intrinsically safe circuit, e.g. Zener barrier or Ex cut-off relay. Pumps within hazardous areas can be directly connected. Notice! Printed installation and operating instructions have been enclosed with the product in the following languages: DE, EN, FR, PL, RU. All language versions have been saved as PDF files on an enclosed USB stick or can be downloaded at https://qr.wilo.com/1401. A notebook or tablet with Adobe Reader is required for installing and commissioning.
	EC-L-2x12A-MT34-DOL-WM-EMS-IPS	2543222
	Switchgear with microcontroller for level-dependent control of two submersible pumps with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating knob. Functions Two different operating modes for a broad field of application: “Drain” operating mode: For draining sewage chambers “Fill” operating mode: For filling water tanks and rainwater storage tanks Configurable overload protection Thermal motor monitoring Pump kick function Adjustable follow-up time Automatic pump alteration Service life optimisation Standby pump Automatic fault-actuated switchover Direction of rotation monitoring High water alarm with forced switch-on of the connected pumps Dry-running protection Fault memory for 10 error messages including the type of fault Operating mode “Ex” for loading preset values for “Ex” applications (please note information given under “Configuration”!) Equipment Display of the current operating status and data as well as faults, using the LCD display and LEDs Symbol-based menu navigation Configuration of operating parameters and operation via operating knob Remote access via ModBus Integrated alarm buzzer Integrated pressure transducer Inputs 1x analogue precision input 4 – 20 mA for level control with level sensor 3x digital inputs for level control with float switch 1x input for level control with a dynamic pressure bell 1x digital input for low water level with float switch (dry-running protection) 1x digital input for high water signal with float switch (high water alarm) 2x inputs for thermal winding protection monitoring with bimetallic temperature sensor - connection of PTC sensors is not possible! 2x inputs for connecting moisture sensors (e.g.: Motor compartment leakage or sealing chamber monitoring) 1x digital input for External On/Off for remote activation and deactivation of automatic mode Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the individual run signal (EBM) per pump 1x potential-free contact* for the individual fault signal (ESM) per pump 1x 24 VDC output for connecting an external alarm signal 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Configuration Signal transmitter to be provided on-site. Switchgears are not protected against explosions and may only be used outside hazardous areas. Signal transmitters within hazardous areas must be connected through an intrinsically safe circuit, e.g. Zener barrier or Ex cut-off relay. Pumps within hazardous areas can be directly connected. Notice! Printed installation and operating instructions have been enclosed with the product in the following languages: DE, EN, FR, PL, RU. All language versions have been saved as PDF files on an enclosed USB stick or can be downloaded at https://qr.wilo.com/1401. A notebook or tablet with Adobe Reader is required for installing and commissioning.
Battery 9V,200mA
Battery 9V,200mA	NiMh rechargeable battery, 9 V/200 mAh	2522850
Battery 9V,200mA	Rechargeable battery to be installed in the switchgears Wilo-control MS-L and EC-L for a mains-independent alarm. Construction: NiMh Power: 9 V, 200 mAh
Dynamic pressure system
Dynamic pressure system	Bubbling-through system	2516977
	Small compressor for continuous or periodic aeration of the velocity head bell, including non-return valve, 3 m hose and T-connector.
	Dynamic pressure bell with 10 m hose	2516976
	Dynamic pressure bell for recording the hydrostatic pressure for fluids that contain faeces. The pressure transducer measures the level in the pump chamber through changes in pressure in the fluid. These pressure changes are forwarded to the switchgear through a sealed hose and evaluated by measuring elements. Because the dynamic pressure bell is open in the direction of the fluid (open dynamic pressure system), the dynamic pressure bell must be aerated after each drainage pumping sequence. Accordingly, the switchgear must have an adjustable run-on time (OFF according to time). If aeration of the dynamic pressure bell is not ensured, then the dynamic pressure bell must be aerated either continuously or periodically (OFF according to level) using a compressor (bubbling-through system, can be ordered as an option). Use in potentially explosive areas permitted.
Signal horn
Signal horn	Signal horn 1~230 V	501459398
	Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer!
	Signal horn 12-24 VDC	2017208
	Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (92 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer!
Flash light
Flash light	Flash light 1~230 VAC	2551613
	Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer!
	Flash light 24 VDC	2551612
	Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer!
Mains-independent alarm signal (7) Alarm signal for detection of flooding in rooms and buildings. The alarm signal is acoustic, optical or wireless. In addition, other consumers can be controlled directly.
Float switch WA
Float switch WA	Float switch WA65 with 10 m cable	503211893
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF
	Float switch WA65 with 20 m cable	2004431
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF
	Float switch WA65 with 30 m cable	2004432
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF
	Float switch WA65 with 5 m cable	503211390
	As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF
DrainAlarm
DrainAlarm	DrainAlarm	2545133
DrainAlarm	Mains-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal. Inputs: 1x digital input for the connection of one float switch Outputs: 1x potential-free changeover contact, switching capacity: 250 VAC/4 A 1x non-isolated changeover contact, switching capacity: 12 VDC/1 A Scope of delivery: Alarm switchgear with built-in battery and connected power cable with shockproof plug 2x threaded cable glands M16x1.5 Installation and operating instructions Attention: Signal transmitter is to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within hazardous areas must be connected through an intrinsically safe electric circuit, e.g. breakdown barrier or ex-rated cut-off relay.
Signal horn
Signal horn	Signal horn 1~230 V	501459398
Signal horn	Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer!
Flash light
Flash light	Flash light 1~230 VAC	2551613
Flash light	Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer!
Pump chamber WS 1100 (9)
Sump length extension
Sump length extension	Pump chamber extension WS 900/1100	2506431
Sump length extension	Pump chamber extension, incl. seal, mounting accessories and stay bar extension for level transmitter. Installation note: Only one extension can be installed per pump chamber!
Pump cover
Pump cover	Sump cover WS 900/1100 flood-proof	2506478
	Pump chamber cover (can be walked on), flood proof due to integrated gaskets, with slip-resistant profile on the cover top, with exterior locking.
	Sump cover WS 900/1100 Standard	2506477
	Pump chamber cover (can be walked on) with slip-resistant profile on the cover top, with interior locking.
Clamp bolting
Clamp bolting	Clamp connection G1½"/ 50 mm	2505044
	Clamp bolting with female thread for connection to a PE discharge pipe outside the pump chamber.
	Clamp connection G1½"/63 mm	2505045
	Clamp bolting with female thread for connection to a PE discharge pipe outside the pump chamber.
	Clamp connection G2"/63 mm	2505046
	Clamp bolting with female thread for connection to a PE discharge pipe outside the pump chamber.
Shut-off device for wastewater and sewage
Shut-off device for wastewater and sewage	Gate valve DN 150, EN-GJL-250	2017164
Shut-off device for wastewater and sewage	Gate valve with plate element and flange connections for shutting off the pipe network. Including mounting accessories.
DrainLift WS 1100
DrainLift WS 1100	DrainLift WS 1100D/DN65	2506442
	Plastic chamber as a twin-head pump system for ground installation. For collecting and pumping of sewage containing faeces: In cases where sewage cannot be led to the sewer system via a natural fall. For the backflow resistant drainage in cases where the discharge point is below the backflow level. Pump chamber with four inlets for flexible connection and four integrated fins for increased anti-buoyancy. The chamber base is hemispherically-shaped to minimise deposits on the chamber base and maximise dimensional stability. Two lifting eyes are integrated for attaching the lifting accessory. The chamber cover can withstand a maximum traffic load of 5 kN/m². Sewage pumping according to (DIN) EN 12050 Depending on the pumps used, the chamber meets the requirements according to: EN 12050-1: Rexa UNI, Rexa FIT DIN EN 12050-1: Rexa PRO Scope of delivery Plastic chamber with installed pipework 2x gate valve 2x surface coupling 2x non-return valve 2x stainless steel chains including fixation hooks Flush connection G1½ Chamber cover with gasket Supporting bar for level sensor or float switch including installation accessories Connection material for two KG inlet pipe DN 150 Operating and maintenance manual Pump, switchgear and level measurement must be ordered as accessories!
	DrainLift WS 1100E/DN65	2506433
	Plastic chamber as a single-pump system for ground installation. For collecting and pumping of sewage containing faeces: In cases where sewage cannot be led to the sewer system via a natural fall. For the backflow resistant drainage in cases where the discharge point is below the backflow level. Pump chamber with four inlets for flexible connection and four integrated fins for increased anti-buoyancy. The chamber base is hemispherically-shaped to minimise deposits on the chamber base and maximise dimensional stability. Two lifting eyes are integrated for attaching the lifting accessory. The chamber cover can withstand a maximum traffic load of 5 kN/m². Sewage pumping according to (DIN) EN 12050 Depending on the pumps used, the chamber meets the requirements according to: EN 12050-1: Rexa UNI, Rexa FIT DIN EN 12050-1: Rexa PRO Scope of delivery Plastic chamber with installed pipework Gate valve Surface coupling Non-return valve Stainless steel chain including fixation hooks Flush connection G1½ Chamber cover with gasket Supporting bar for level sensor or float switch including installation accessories Connection material for two KG inlet pipe DN 150 Operating and maintenance manual Pump, switchgear and level measurement must be ordered as accessories!
Simple mains connection (5) Accessories for simple connection to the mains system.
Connection cable
Connection cable	50 m connection cable H07RN-F 6G1,5	6087988
	Connection cable for Rexa UNI and FIT, with bare cable ends.
	30 m connection cable H07RN-F 6G1	6087989
	Connection cable for Rexa UNI and FIT, with bare cable ends.
	30 m connection cable H07RN-F 3G1	6087990
	Connection cable for Rexa UNI and FIT, with shock-proof plug and float switch.
	30 m connection cable H07RN-F 3G1	6087991
	Connection cable for Rexa UNI and FIT, with shock-proof plug.
	20 m connection cable H07RN-F 6G1	6087992
	Connection cable for Rexa UNI and FIT, with bare cable ends.
Stationary wet well installation DN 65 (17) Installation example Installation drawing The pumps are immersed in the fluid. Connection to the discharge pipe is normally by a suspension unit. For maintenance purposes, the pumps can be removed from the top of the chamber. There is no need to loosen any screws or drain the water. For a correct operation of the pumps, it is necessary to know the switching volume. The switching volume is calculated as the difference between the ON and OFF switching points. The OFF-switch point will define by the operating mode for submerged and non-submerged operation of the motor.
Pipe elbow 90° flange/flange 1.1.3
Pipe elbow 90° flange/flange 1.1.3	90° pipe elbow DN 65	2017183
Pipe elbow 90° flange/flange 1.1.3	90° pipe elbow, with flange connection on both sides, for installation in the discharge pipe, incl. 1 set of mounting accessories.
Y-piece 1.1.5
Y-piece 1.1.5	DN 65 Y-piece	2017178
Y-piece 1.1.5	Y-piece to combine two discharge lines into a common discharge line for double-pump systems; includes two installation accessory kits.
Suspension unit 1.4.1
Suspension unit 1.4.1	Suspension unit DN 65/2RK	6070150
Suspension unit 1.4.1	Suspension unit for mounting in the pump chamber for easy installation of the sewage pump to the discharge pipe. scope of delivery: Foot elbow with double pipe bracket Coupling flange for installation on the discharge port Profile joint Installation sundries The two guide pipes (26.9x2 mm) are to be provided by the customer!
Sling chain, galvanized steel 1.4.3
Sling chain, galvanized steel 1.4.3	Sling chain kit PCS-CE, galvanised steel, 400 kg, 10 m	6063142
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, galvanised steel, 400 kg, 3 m	6063139
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles without connecting links for suspension.
	Sling chain kit PCS-CE, galvanised steel, 400 kg, 5 m	6063140
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
Sling chain, stainless steel 1.4.3
Sling chain, stainless steel 1.4.3	Sling chain kit PCS-CE, stainless steel, 400 kg, 10 m	6063138
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, stainless steel, 400 kg, 3 m	6063135
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles without connecting links for suspension.
	Sling chain kit PCS-CE, stainless steel, 400 kg, 5 m	6063136
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
Guide bracket 1.4.14
Guide bracket 1.4.14	Bracket for guide pipe extension DN 65 for GG pipe	6066849
	Guide pipe bracket for 2 guide pipes for extension of the guide pipes for installation depths of over 6 m. For pipe attachment to a case iron pipe, including mounting accessories.
	Bracket for guide pipe extension DN 65 for ST pipe	6066850
	Guide pipe bracket for 2 guide pipes for extension of the guide pipes for installation depths of over 6 m. For pipe attachment to a steel pipe, including mounting accessories.
	Guide pipe bracket DN 65 for GG pipe	6066847
	Guide pipe bracket for 2 guide pipes for extension of the guide pipes for installation depths of over 6 m. For pipe attachment to a steel pipe, including mounting accessories.
	Guide pipe bracket DN 65 for ST pipe	6066848
	Guide pipe bracket for 2 pipe guides, for pipe attachment on a steel pipe, including mounting accessories. As an alternative to pump chamber fixation.
Guide tube 1.4.15
Guide tube 1.4.15	Guide pipe Ø26.9x2mm 6m 1.4301	6049244
	Guide pipe suitable for use with the suspension unit. Safely routes the pump to the coupling connection. Required quantity depends on suspension unit: 1R = 1x guide pipe 2R = 2x guide pipes
	Guide pipe Ø26.9x2mm 6m 1.4571	6049245
	Guide pipe suitable for use with the suspension unit. Safely routes the pump to the coupling connection. Required quantity depends on suspension unit: 1R = 1x guide pipe 2R = 2x guide pipes
Shut-off device for wastewater and sewage 1.5.1
Shut-off device for wastewater and sewage 1.5.1	Gate valve DN 65, EN-GJL-250	2017161
Shut-off device for wastewater and sewage 1.5.1	Gate valve with plate element and flange connections for shutting off the pipe network. Including mounting accessories.
Non-return valve 1.5.2
Non-return valve 1.5.2	Non-return valve DN 65	2017167
Non-return valve 1.5.2	Non-return valve in accordance with EN 12050-4 for automatic closing of the pressure pipe to prevent loss of pressure and consequent pressure surges. Including mounting accessories. Connection: Flange Closing element: spring-loaded flap
Stationary wet well installation DN 80 (13) Installation example Installation drawing The pumps are immersed in the fluid. Connection to the discharge pipe is normally by a suspension unit. For maintenance purposes, the pumps can be removed from the top of the chamber. There is no need to loosen any screws or drain the water. For a correct operation of the pumps, it is necessary to know the switching volume. The switching volume is calculated as the difference between the ON and OFF switching points. The OFF-switch point will define by the operating mode for submerged and non-submerged operation of the motor.
Pipe elbow 90° flange/flange 1.1.3
Pipe elbow 90° flange/flange 1.1.3	90° pipe elbow DN 80	2012064
Pipe elbow 90° flange/flange 1.1.3	90° pipe elbow, with flange connection on both sides, for installation in the discharge pipe, incl. 1 set of mounting accessories.
Y-piece 1.1.5
Y-piece 1.1.5	DN 80 Y-piece	2017179
Y-piece 1.1.5	Y-piece to combine two discharge lines into a common discharge line for double-pump systems; includes two installation accessory kits.
Suspension unit 1.4.1
Suspension unit 1.4.1	Suspension unit DN 80/2RK	6082333
Suspension unit 1.4.1	Suspension unit for mounting in the pump chamber for easy installation of the sewage pump to the discharge pipe. scope of delivery: Foot elbow with double pipe bracket Coupling flange for installation on the discharge port Profile joint Installation sundries The two guide pipes (42.4x2 mm) are to be provided by the customer!
Sling chain, galvanized steel 1.4.3
Sling chain, galvanized steel 1.4.3	Sling chain kit PCS-CE, galvanised steel, 400 kg, 10 m	6063142
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, galvanised steel, 400 kg, 3 m	6063139
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles without connecting links for suspension.
	Sling chain kit PCS-CE, galvanised steel, 400 kg, 5 m	6063140
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
Sling chain, stainless steel 1.4.3
Sling chain, stainless steel 1.4.3	Sling chain kit PCS-CE, stainless steel, 400 kg, 10 m	6063138
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, stainless steel, 400 kg, 3 m	6063135
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles without connecting links for suspension.
	Sling chain kit PCS-CE, stainless steel, 400 kg, 5 m	6063136
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
Guide tube 1.4.15
Guide tube 1.4.15	Guide pipe Ø42.4x2mm 6m 1.4301	6031565
	Guide pipe suitable for use with the suspension unit. Safely routes the pump to the coupling connection. Required quantity depends on suspension unit: 1R = 1x guide pipe 2R = 2x guide pipes
	Guide pipe Ø42.4x2mm 6m 1.4571	6031566
	Guide pipe suitable for use with the suspension unit. Safely routes the pump to the coupling connection. Required quantity depends on suspension unit: 1R = 1x guide pipe 2R = 2x guide pipes
Shut-off device for wastewater and sewage 1.5.1
Shut-off device for wastewater and sewage 1.5.1	Gate valve DN 80, EN-GJL-250	2017162
Shut-off device for wastewater and sewage 1.5.1	Gate valve with plate element and flange connections for shutting off the pipe network. Including mounting accessories.
Non-return valve 1.5.2
Non-return valve 1.5.2	Non-return valve DN 80	2017168
Non-return valve 1.5.2	Non-return valve in accordance with EN 12050-4 for automatic closing of the pressure pipe to prevent loss of pressure and consequent pressure surges. Including mounting accessories. Connection: Flange Closing element: spring-loaded flap
Portable wet well installation DN 65 (11) Installation example Installation drawing The pump is equipped with a pump foot (integrated in the pump housing or separately as an accessory). With this pump foot, the pump can be easily and flexibly installed in any operating space. Hoses are used as discharge pipes. Connection is with a hose nipple or Storz coupling. For a level-dependent operation, it is recommended to use a pump with a float switch.
Pipe elbow 90° flange/nozzle 1.1.2
Pipe elbow 90° flange/nozzle 1.1.2	90° pipe elbow DN 65/70 mm	4027346
Pipe elbow 90° flange/nozzle 1.1.2	90° pipe elbow for mounting to the pump pressure connection for a direct hose connection with hose nozzle, incl. 1 set mounting accessories and hose nozzle. Connections: On pump side: Flange connection On pressure side: Hose connection
Threaded flange for drainage and sewage 1.1.7
Threaded flange for drainage and sewage 1.1.7	Threaded flange DN 65 on Rp 2½	4015204
Threaded flange for drainage and sewage 1.1.7	Threaded flange with neck and cylindrical female thread for the adapter to a flange connection. Suitable for screwing in threaded pipes with cone-shaped male thread. Including 1 set mounting accessories.
Pump foot 1.4.2
Pump foot 1.4.2	Floor supporting foot DN 50/65	6064666
Pump foot 1.4.2	Pump support foot for assembling on the suction port for portable wet well installation, incl. mounting accessories.
Sling chain, galvanized steel 1.4.3
Sling chain, galvanized steel 1.4.3	Sling chain kit PCS-CE, galvanised steel, 400 kg, 10 m	6063142
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, galvanised steel, 400 kg, 5 m	6063140
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
Sling chain, stainless steel 1.4.3
Sling chain, stainless steel 1.4.3	Sling chain kit PCS-CE, stainless steel, 400 kg, 10 m	6063138
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, stainless steel, 400 kg, 5 m	6063136
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
Synthetic fibre hose with coupling 1.7.4
Synthetic fibre hose with coupling 1.7.4	Synthetic fibre pressure hose 10 m, with Storz C	6003650
	Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling.
	Synthetic fibre pressure hose 20 m, with Storz C	6003649
	Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling.
	Synthetic fibre pressure hose 5 m, with Storz C	6003651
	Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling.
Storz pipe coupling 1.7.5
Storz pipe coupling 1.7.5	Fixed coupling Storz C/G 2½	2015234
Storz pipe coupling 1.7.5	Storz fixed coupling with male thread for installation on the pressure connection
Portable wet well installation DN 80 (9) Installation example Installation drawing The pump is equipped with a pump foot (integrated in the pump housing or separately as an accessory). With this pump foot, the pump can be easily and flexibly installed in any operating space. Hoses are used as discharge pipes. Connection is with a hose nipple or Storz coupling. For a level-dependent operation, it is recommended to use a pump with a float switch.
Pump foot 1.4.2
Pump foot 1.4.2	Floor supporting foot DN 50/65	6064666
Pump foot 1.4.2	Pump support foot for assembling on the suction port for portable wet well installation, incl. mounting accessories.
Sling chain, galvanized steel 1.4.3
Sling chain, galvanized steel 1.4.3	Sling chain kit PCS-CE, galvanised steel, 400 kg, 10 m	6063142
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, galvanised steel, 400 kg, 5 m	6063140
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
Sling chain, stainless steel 1.4.3
Sling chain, stainless steel 1.4.3	Sling chain kit PCS-CE, stainless steel, 400 kg, 10 m	6063138
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, stainless steel, 400 kg, 5 m	6063136
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
Synthetic fibre hose with coupling 1.7.4
Synthetic fibre hose with coupling 1.7.4	Synthetic fibre pressure hose 10 m, with Storz B	6003051
	Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling.
	Synthetic fibre pressure hose 20 m, with Storz B	6003050
	Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling.
	Synthetic fibre pressure hose 5 m, with Storz B	6003052
	Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling.
Storz-pipe coupling with 90° pipe elbow 1.7.5
Storz-pipe coupling with 90° pipe elbow 1.7.5	Fixed coupling set Storz B/DN 80	6031385
Storz-pipe coupling with 90° pipe elbow 1.7.5	Pressure connection set consisting of Storz fixed coupling, 90° pipe elbow and flanged connection. Including 1 set mounting accessories.

Fittings (8)
Non-return valve
Non-return valve	Non-return valve DN 65	2017167
	Non-return valve in accordance with EN 12050-4 for automatic closing of the pressure pipe to prevent loss of pressure and consequent pressure surges. Including mounting accessories. Connection: Flange Closing element: spring-loaded flap
	Non-return valve DN 80	2017168
	Non-return valve in accordance with EN 12050-4 for automatic closing of the pressure pipe to prevent loss of pressure and consequent pressure surges. Including mounting accessories. Connection: Flange Closing element: spring-loaded flap
Shut-off device for wastewater and sewage
Shut-off device for wastewater and sewage	Gate valve DN 65, EN-GJL-250	2017161
	Gate valve with plate element and flange connections for shutting off the pipe network. Including mounting accessories.
	Gate valve DN 80, EN-GJL-250	2017162
	Gate valve with plate element and flange connections for shutting off the pipe network. Including mounting accessories.
	Gate valve DN 100, EN-GJL-250	2017163
	Gate valve with plate element and flange connections for shutting off the pipe network. Including mounting accessories.
	Gate valve DN 150, EN-GJL-250	2017164
	Gate valve with plate element and flange connections for shutting off the pipe network. Including mounting accessories.
	Gate valve DN 100, PVC	2529808
	Gate valve with plate element and fixed HT/KG-flange connections for shutting off the pipe network.
	Gate valve DN 150, PVC	2529809
	Gate valve with plate element and fixed HT/KG-flange connections for shutting off the pipe network.
Hoses / hose joints (31)
Plastic hose without coupling
Plastic hose without coupling	Synthetic pressure hose 10 m, Ø 52 mm	2017192
	Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle.
	Synthetic pressure hose 20 m, Ø 90 mm	2017193
	Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle.
	Synthetic pressure hose 30 m, Ø 90 mm	2017194
	Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle.
	Synthetic pressure hose 10 m, Ø 110 mm	2017196
	Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle.
	Synthetic pressure hose 20 m, Ø 110 mm	2017197
	Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle.
	Synthetic pressure hose 30 m, Ø 110 mm	2017198
	Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle.
	Synthetic pressure hose 10 m, Ø 60 mm	2018106
	Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle.
	Synthetic pressure hose 3 m, Ø 42 mm	2027641
	Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle.
	Synthetic pressure hose 5 m, Ø 42 mm	2027642
	Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle.
	Synthetic pressure hose 15 m, Ø 42 mm	2027643
	Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle.
	Synthetic pressure hose 3 m, Ø 60 mm	2027644
	Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle.
	Synthetic pressure hose 5 m, Ø 60 mm	2027645
	Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle.
Storz pipe coupling
Storz pipe coupling	Fixed coupling Storz C/G 2½	2015234
	Storz fixed coupling with male thread for installation on the pressure connection
	Fixed coupling Storz A/G 4	2016161
	Storz fixed coupling with female thread for installation at the discharge port
	Fixed coupling Storz 90 mm/G 3	2017203
	Storz fixed coupling with female thread for installation at the discharge port
	Fixed coupling Storz C/G 2	2018102
	Storz fixed coupling with male thread for installation on the pressure connection
	Fixed coupling Storz 90 mm/G 2½	6003069
	Storz fixed coupling with male thread for installation on the pressure connection
	Fixed coupling Storz C/G 1½	6072745
	Storz fixed coupling with male thread for installation on the pressure connection
	Fixed coupling Storz C/G 1¼	6003067
	Storz fixed coupling with male thread for installation on the pressure connection
Storz-pipe coupling with 90° pipe elbow
Storz-pipe coupling with 90° pipe elbow	Fixed coupling set Storz B/DN 80	6031385
Storz-pipe coupling with 90° pipe elbow	Pressure connection set consisting of Storz fixed coupling, 90° pipe elbow and flanged connection. Including 1 set mounting accessories.
Synthetic fibre hose with coupling
Synthetic fibre hose with coupling	Synthetic fibre pressure hose 20 m, with Storz B	6003050
	Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling.
	Synthetic fibre pressure hose 10 m, with Storz B	6003051
	Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling.
	Synthetic fibre pressure hose 5 m, with Storz B	6003052
	Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling.
	Synthetic fibre pressure hose 20 m, with Storz F	6003647
	Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling.
	Synthetic fibre pressure hose 10 m, with Storz F	6003648
	Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling.
	Synthetic fibre pressure hose 20 m, with Storz C	6003649
	Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling.
	Synthetic fibre pressure hose 10 m, with Storz C	6003650
	Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling.
	Synthetic fibre pressure hose 5 m, with Storz C	6003651
	Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling.
	Synthetic fibre pressure hose 5 m, with Storz A	6022391
	Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling.
	Synthetic fibre pressure hose 10 m, with Storz A	6022392
	Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling.
	Synthetic fibre pressure hose 20 m, with Storz A	6022393
	Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling.
Installation/setup (46)
Clamp bolting
Clamp bolting	Clamp connection G1½"/ 50 mm	2505044
	Clamp bolting with female thread for connection to a PE discharge pipe outside the pump chamber.
	Clamp connection G1½"/63 mm	2505045
	Clamp bolting with female thread for connection to a PE discharge pipe outside the pump chamber.
	Clamp connection G2"/63 mm	2505046
	Clamp bolting with female thread for connection to a PE discharge pipe outside the pump chamber.
	Clamp connection G2"/75 mm	2525181
	Clamp bolting with female thread for connection to a PE discharge pipe outside the pump chamber.
	Clamp connection 50mm/50 mm	2525183
	Clamp bolting for connection to a PE discharge pipe outside the pump chamber.
	Clamp connection 50mm/63 mm	2525184
	Clamp bolting for connection to a PE discharge pipe outside the pump chamber.
	Clamp connection G1¼"/40 mm	2543025
	Clamp bolting with female thread for connection to a PE discharge pipe outside the pump chamber.
	Clamp connection G1¼"/50 mm	2543026
	Clamp bolting with female thread for connection to a PE discharge pipe outside the pump chamber.
	Clamp connection G1¼"/63 mm	2543027
	Clamp bolting with female thread for connection to a PE discharge pipe outside the pump chamber.
Guide bracket
Guide bracket	Guide pipe bracket DN 65 for GG pipe	6066847
	Guide pipe bracket for 2 guide pipes for extension of the guide pipes for installation depths of over 6 m. For pipe attachment to a steel pipe, including mounting accessories.
	Guide pipe bracket DN 65 for ST pipe	6066848
	Guide pipe bracket for 2 pipe guides, for pipe attachment on a steel pipe, including mounting accessories. As an alternative to pump chamber fixation.
	Bracket for guide pipe extension DN 65 for GG pipe	6066849
	Guide pipe bracket for 2 guide pipes for extension of the guide pipes for installation depths of over 6 m. For pipe attachment to a case iron pipe, including mounting accessories.
	Bracket for guide pipe extension DN 65 for ST pipe	6066850
	Guide pipe bracket for 2 guide pipes for extension of the guide pipes for installation depths of over 6 m. For pipe attachment to a steel pipe, including mounting accessories.
Guide tube
Guide tube	Guide pipe Ø42.4x2mm 6m 1.4301	6031565
	Guide pipe suitable for use with the suspension unit. Safely routes the pump to the coupling connection. Required quantity depends on suspension unit: 1R = 1x guide pipe 2R = 2x guide pipes
	Guide pipe Ø42.4x2mm 6m 1.4571	6031566
	Guide pipe suitable for use with the suspension unit. Safely routes the pump to the coupling connection. Required quantity depends on suspension unit: 1R = 1x guide pipe 2R = 2x guide pipes
	Guide pipe Ø26.9x2mm 6m 1.4301	6049244
	Guide pipe suitable for use with the suspension unit. Safely routes the pump to the coupling connection. Required quantity depends on suspension unit: 1R = 1x guide pipe 2R = 2x guide pipes
	Guide pipe Ø26.9x2mm 6m 1.4571	6049245
	Guide pipe suitable for use with the suspension unit. Safely routes the pump to the coupling connection. Required quantity depends on suspension unit: 1R = 1x guide pipe 2R = 2x guide pipes
Pump cover
Pump cover	Sump cover WS 900/1100 Standard	2506477
	Pump chamber cover (can be walked on) with slip-resistant profile on the cover top, with interior locking.
	Sump cover WS 900/1100 flood-proof	2506478
	Pump chamber cover (can be walked on), flood proof due to integrated gaskets, with slip-resistant profile on the cover top, with exterior locking.
Pump foot
Pump foot	Floor supporting foot DN 50/65	6064666
Pump foot	Pump support foot for assembling on the suction port for portable wet well installation, incl. mounting accessories.
Sling chain, galvanized steel
Sling chain, galvanized steel	Sling chain kit PCS-CE, galvanised steel, 400 kg, 3 m	6063139
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles without connecting links for suspension.
	Sling chain kit PCS-CE, galvanised steel, 400 kg, 5 m	6063140
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, galvanised steel, 400 kg, 6 m	6063141
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, galvanised steel, 400 kg, 10 m	6063142
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, galvanised steel, 800 kg, 3 m	6063147
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles without connecting links for suspension.
	Sling chain kit PCS-CE, galvanised steel, 800 kg, 5 m	6063148
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, galvanised steel, 800 kg, 6 m	6063149
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, galvanised steel, 800 kg, 10 m	6063150
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, galvanised steel, 2000 kg, 10 m	6063152
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, galvanised steel, 5000 kg, 10 m	6063154
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, galvanised steel, 7000 kg, 10 m	6063156
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, galvanised steel, 9000 kg, 10 m	6063518
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
Sling chain, stainless steel
Sling chain, stainless steel	Sling chain kit PCS-CE, stainless steel, 400 kg, 3 m	6063135
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles without connecting links for suspension.
	Sling chain kit PCS-CE, stainless steel, 400 kg, 5 m	6063136
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, stainless steel, 400 kg, 6 m	6063137
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, stainless steel, 400 kg, 10 m	6063138
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, stainless steel, 800 kg, 3 m	6063143
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles without connecting links for suspension.
	Sling chain kit PCS-CE, stainless steel, 800 kg, 5 m	6063144
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, stainless steel, 800 kg, 6 m	6063145
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, stainless steel, 800 kg, 10 m	6063146
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, stainless steel, 2000 kg, 10 m	6063151
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, stainless steel, 5000 kg, 10 m	6063153
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
	Sling chain kit PCS-CE, stainless steel, 7000 kg, 10 m	6063155
	Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension.
Sump length extension
Sump length extension	Pump chamber extension WS 900/1100	2506431
Sump length extension	Pump chamber extension, incl. seal, mounting accessories and stay bar extension for level transmitter. Installation note: Only one extension can be installed per pump chamber!
Suspension unit
Suspension unit	Suspension unit DN 65/2RK	6070150
	Suspension unit for mounting in the pump chamber for easy installation of the sewage pump to the discharge pipe. scope of delivery: Foot elbow with double pipe bracket Coupling flange for installation on the discharge port Profile joint Installation sundries The two guide pipes (26.9x2 mm) are to be provided by the customer!
	Suspension unit DN 80/2RK	6082333
	Suspension unit for mounting in the pump chamber for easy installation of the sewage pump to the discharge pipe. scope of delivery: Foot elbow with double pipe bracket Coupling flange for installation on the discharge port Profile joint Installation sundries The two guide pipes (42.4x2 mm) are to be provided by the customer!
Pipes/pipe joints (9)
Pipe elbow 90° flange/flange
Pipe elbow 90° flange/flange	90° pipe elbow DN 65	2017183
	90° pipe elbow, with flange connection on both sides, for installation in the discharge pipe, incl. 1 set of mounting accessories.
	90° pipe elbow DN 80	2012064
	90° pipe elbow, with flange connection on both sides, for installation in the discharge pipe, incl. 1 set of mounting accessories.
Pipe elbow 90° flange/nozzle
Pipe elbow 90° flange/nozzle	90° pipe elbow DN 65/70 mm	4027346
	90° pipe elbow for mounting to the pump pressure connection for a direct hose connection with hose nozzle, incl. 1 set mounting accessories and hose nozzle. Connections: On pump side: Flange connection On pressure side: Hose connection
	90° pipe elbow DN 80/75 mm	6031342
	90° pipe elbow for mounting to the pump pressure connection for a direct hose connection with hose nozzle, incl. 1 set mounting accessories and hose nozzle. Connections: On pump side: Flange connection On pressure side: Hose connection
Threaded flange for drainage and sewage
Threaded flange for drainage and sewage	Threaded flange DN 65 on Rp 2½	4015204
	Threaded flange with neck and cylindrical female thread for the adapter to a flange connection. Suitable for screwing in threaded pipes with cone-shaped male thread. Including 1 set mounting accessories.
	Threaded flange DN 50 on Rp 2	4027333
	Threaded flange with neck and cylindrical female thread for the adapter to a flange connection. Suitable for screwing in threaded pipes with cone-shaped male thread. Including 1 set mounting accessories.
	Threaded flange DN 80 on Rp 3	6003672
	Threaded flange with neck and cylindrical female thread for the adapter to a flange connection. Suitable for screwing in threaded pipes with cone-shaped male thread. Including 1 set mounting accessories.
Y-piece
Y-piece	DN 65 Y-piece	2017178
	Y-piece to combine two discharge lines into a common discharge line for double-pump systems; includes two installation accessory kits.
	DN 80 Y-piece	2017179
	Y-piece to combine two discharge lines into a common discharge line for double-pump systems; includes two installation accessory kits.
Pump chamber (3)
DrainLift WS 1100
DrainLift WS 1100	DrainLift WS 1100E/DN65	2506433
	Plastic chamber as a single-pump system for ground installation. For collecting and pumping of sewage containing faeces: In cases where sewage cannot be led to the sewer system via a natural fall. For the backflow resistant drainage in cases where the discharge point is below the backflow level. Pump chamber with four inlets for flexible connection and four integrated fins for increased anti-buoyancy. The chamber base is hemispherically-shaped to minimise deposits on the chamber base and maximise dimensional stability. Two lifting eyes are integrated for attaching the lifting accessory. The chamber cover can withstand a maximum traffic load of 5 kN/m². Sewage pumping according to (DIN) EN 12050 Depending on the pumps used, the chamber meets the requirements according to: EN 12050-1: Rexa UNI, Rexa FIT DIN EN 12050-1: Rexa PRO Scope of delivery Plastic chamber with installed pipework Gate valve Surface coupling Non-return valve Stainless steel chain including fixation hooks Flush connection G1½ Chamber cover with gasket Supporting bar for level sensor or float switch including installation accessories Connection material for two KG inlet pipe DN 150 Operating and maintenance manual Pump, switchgear and level measurement must be ordered as accessories!
	DrainLift WS 1100E/DN80	2506434
	Plastic chamber as a single-pump system for ground installation. For collecting and pumping of sewage containing faeces: In cases where sewage cannot be led to the sewer system via a natural fall. For the backflow resistant drainage in cases where the discharge point is below the backflow level. Pump chamber with four inlets for flexible connection and four integrated fins for increased anti-buoyancy. The chamber base is hemispherically-shaped to minimise deposits on the chamber base and maximise dimensional stability. Two lifting eyes are integrated for attaching the lifting accessory. The chamber cover can withstand a maximum traffic load of 5 kN/m². Sewage pumping according to (DIN) EN 12050 Depending on the pumps used, the chamber meets the requirements according to: EN 12050-1: Rexa FIT DIN EN 12050-1: Drain TP 80, Rexa PRO Scope of delivery Plastic chamber with installed pipework Gate valve Surface coupling Non-return valve Stainless steel chain including fixation hooks Flush connection G1½ Chamber cover with gasket Supporting bar for level sensor or float switch including installation accessories Connection material for two KG inlet pipe DN 150 Operating and maintenance manual Pump, switchgear and level measurement must be ordered as accessories!
	DrainLift WS 1100D/DN65	2506442
	Plastic chamber as a twin-head pump system for ground installation. For collecting and pumping of sewage containing faeces: In cases where sewage cannot be led to the sewer system via a natural fall. For the backflow resistant drainage in cases where the discharge point is below the backflow level. Pump chamber with four inlets for flexible connection and four integrated fins for increased anti-buoyancy. The chamber base is hemispherically-shaped to minimise deposits on the chamber base and maximise dimensional stability. Two lifting eyes are integrated for attaching the lifting accessory. The chamber cover can withstand a maximum traffic load of 5 kN/m². Sewage pumping according to (DIN) EN 12050 Depending on the pumps used, the chamber meets the requirements according to: EN 12050-1: Rexa UNI, Rexa FIT DIN EN 12050-1: Rexa PRO Scope of delivery Plastic chamber with installed pipework 2x gate valve 2x surface coupling 2x non-return valve 2x stainless steel chains including fixation hooks Flush connection G1½ Chamber cover with gasket Supporting bar for level sensor or float switch including installation accessories Connection material for two KG inlet pipe DN 150 Operating and maintenance manual Pump, switchgear and level measurement must be ordered as accessories!

Pump control (14)
Switchgear Wilo-Control EC-Lift
Switchgear Wilo-Control EC-Lift	EC-L-1x12A-MT34-DOL-WM	2543210
	Switchgear with microcontroller for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating knob. Functions Two different operating modes for a broad field of application: “Drain” operating mode: For draining sewage chambers “Fill” operating mode: For filling water tanks and rainwater storage tanks Configurable overload protection Thermal motor monitoring Pump kick function Adjustable follow-up time Direction of rotation monitoring High water alarm with forced switch-on of the connected pump Dry-running protection Fault memory for 10 error messages including the type of fault Operating mode “Ex” for loading preset values for “Ex” applications (please note information given under “Configuration”!) Equipment Display of the current operating status and data as well as faults, using the LCD display and LEDs Symbol-based menu navigation Configuration of operating parameters and operation via operating knob Main switch Remote access via ModBus Integrated alarm buzzer Inputs 1x analogue precision input 4 – 20 mA for level control with level sensor 2x digital inputs for level control with float switch 1x digital input for low water level with float switch (dry-running protection) 1x digital input for high water signal with float switch (high water alarm) 1x input for thermal winding monitor with bimetallic temperature sensor – connection of PTC sensors is not possible! 1x input for connecting moisture sensors (e.g.: Motor compartment leakage or sealing chamber monitoring) 1x digital input for External On/Off for remote activation and deactivation of automatic mode Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the individual run signal (EBM) per pump 1x potential-free contact* for the individual fault signal (ESM) per pump 1x 24 VDC output for connecting an external alarm signal 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Configuration Signal transmitter to be provided on-site. Switchgears are not protected against explosions and may only be used outside hazardous areas. Signal transmitters within hazardous areas must be connected through an intrinsically safe circuit, e.g. Zener barrier or Ex cut-off relay. Pumps within hazardous areas can be directly connected. Notice! Printed installation and operating instructions have been enclosed with the product in the following languages: DE, EN, FR, PL, RU. All language versions have been saved as PDF files on an enclosed USB stick or can be downloaded at https://qr.wilo.com/1401. A notebook or tablet with Adobe Reader is required for installing and commissioning.
	EC-L-1x12A-MT34-DOL-WM-EMS	2543211
	Switchgear with microcontroller for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating knob. Functions Two different operating modes for a broad field of application: “Drain” operating mode: For draining sewage chambers “Fill” operating mode: For filling water tanks and rainwater storage tanks Configurable overload protection Thermal motor monitoring Pump kick function Adjustable follow-up time Direction of rotation monitoring High water alarm with forced switch-on of the connected pump Dry-running protection Fault memory for 10 error messages including the type of fault Operating mode “Ex” for loading preset values for “Ex” applications (please note information given under “Configuration”!) Equipment Display of the current operating status and data as well as faults, using the LCD display and LEDs Symbol-based menu navigation Configuration of operating parameters and operation via operating knob Remote access via ModBus Integrated alarm buzzer Inputs 1x analogue precision input 4 – 20 mA for level control with level sensor 2x digital inputs for level control with float switch 1x digital input for low water level with float switch (dry-running protection) 1x digital input for high water signal with float switch (high water alarm) 1x input for thermal winding monitor with bimetallic temperature sensor – connection of PTC sensors is not possible! 1x input for connecting moisture sensors (e.g.: motor compartment leakage or sealing chamber monitoring) 1x digital input for External On/Off for remote activation and deactivation of automatic mode Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the individual run signal (EBM) per pump 1x potential-free contact* for the individual fault signal (ESM) per pump 1x 24 VDC output for connecting an external alarm signal 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Configuration Signal transmitter to be provided on-site. Switchgears are not protected against explosions and may only be used outside hazardous areas. Signal transmitters within hazardous areas must be connected through an intrinsically safe circuit, e.g. Zener barrier or Ex cut-off relay. Pumps within hazardous areas can be directly connected. Notice! Printed installation and operating instructions have been enclosed with the product in the following languages: DE, EN, FR, PL, RU. All language versions have been saved as PDF files on an enclosed USB stick or can be downloaded at https://qr.wilo.com/1401. A notebook or tablet with Adobe Reader is required for installing and commissioning.
	EC-L-1x12A-MT34-DOL-WM-EMS-IPS	2543212
	Switchgear with microcontroller for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating knob. Functions Two different operating modes for a broad field of application: “Drain” operating mode: For draining sewage chambers “Fill” operating mode: For filling water tanks and rainwater storage tanks Configurable overload protection Thermal motor monitoring Pump kick function Adjustable follow-up time Direction of rotation monitoring High water alarm with forced switch-on of the connected pump Dry-running protection Fault memory for 10 error messages including the type of fault Operating mode “Ex” for loading preset values for “Ex” applications (please note information given under “Configuration”!) Equipment Display of the current operating status and data as well as faults, using the LCD display and LEDs Symbol-based menu navigation Configuration of operating parameters and operation via operating knob Remote access via ModBus Integrated alarm buzzer Integrated pressure transducer Inputs 1x analogue precision input 4 – 20 mA for level control with level sensor 2x digital inputs for level control with float switch 1x input for level control with a dynamic pressure bell 1x digital input for low water level with float switch (dry-running protection) 1x digital input for high water signal with float switch (high water alarm) 1x input for thermal winding monitor with bimetallic temperature sensor – connection of PTC sensors is not possible! 1x input for connecting moisture sensors (e.g.: Motor compartment leakage or sealing chamber monitoring) 1x digital input for External On/Off for remote activation and deactivation of automatic mode Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the individual run signal (EBM) per pump 1x potential-free contact* for the individual fault signal (ESM) per pump 1x 24 VDC output for connecting an external alarm signal 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Configuration Signal transmitter to be provided on-site. Switchgears are not protected against explosions and may only be used outside hazardous areas. Signal transmitters within hazardous areas must be connected through an intrinsically safe circuit, e.g. Zener barrier or Ex cut-off relay. Pumps within hazardous areas can be directly connected. Notice! Printed installation and operating instructions have been enclosed with the product in the following languages: DE, EN, FR, PL, RU. All language versions have been saved as PDF files on an enclosed USB stick or can be downloaded at https://qr.wilo.com/1401. A notebook or tablet with Adobe Reader is required for installing and commissioning.
	EC-L-2x12A-MT34-DOL-WM	2543220
	Switchgear with microcontroller for level-dependent control of two submersible pumps with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating knob. Functions Two different operating modes for a broad field of application: “Drain” operating mode: For draining sewage chambers “Fill” operating mode: For filling water tanks and rainwater storage tanks Configurable overload protection Thermal motor monitoring Pump kick function Adjustable follow-up time Automatic pump alteration Service life optimisation Standby pump Automatic fault-actuated switchover Direction of rotation monitoring High water alarm with forced switch-on of the connected pumps Dry-running protection Fault memory for 10 error messages including the type of fault Operating mode “Ex” for loading preset values for “Ex” applications (please note information given under “Configuration”!) Equipment Display of the current operating status and data as well as faults, using the LCD display and LEDs Symbol-based menu navigation Main switch Configuration of operating parameters and operation via operating knob Remote access via ModBus Integrated alarm buzzer Inputs 1x analogue precision input 4 – 20 mA for level control with level sensor 3x digital inputs for level control with float switch 1x digital input for low water level with float switch (dry-running protection) 1x digital input for high water signal with float switch (high water alarm) 2x inputs for thermal winding protection monitoring with bimetallic temperature sensor - connection of PTC sensors is not possible! 2x inputs for connecting moisture sensors (e.g.: Motor compartment leakage or sealing chamber monitoring) 1x digital input for External On/Off for remote activation and deactivation of automatic mode Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the individual run signal (EBM) per pump 1x potential-free contact* for the individual fault signal (ESM) per pump 1x 24 VDC output for connecting an external alarm signal 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Configuration Signal transmitter to be provided on-site. Switchgears are not protected against explosions and may only be used outside hazardous areas. Signal transmitters within hazardous areas must be connected through an intrinsically safe circuit, e.g. Zener barrier or Ex cut-off relay. Pumps within hazardous areas can be directly connected. Notice! Printed installation and operating instructions have been enclosed with the product in the following languages: DE, EN, FR, PL, RU. All language versions have been saved as PDF files on an enclosed USB stick or can be downloaded at https://qr.wilo.com/1401. A notebook or tablet with Adobe Reader is required for installing and commissioning.
	EC-L-2x12A-MT34-DOL-WM-EMS	2543221
	Switchgear with microcontroller for level-dependent control of two submersible pumps with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating knob. Functions Two different operating modes for a broad field of application: “Drain” operating mode: For draining sewage chambers “Fill” operating mode: For filling water tanks and rainwater storage tanks Configurable overload protection Thermal motor monitoring Pump kick function Adjustable follow-up time Automatic pump alteration Service life optimisation Standby pump Automatic fault-actuated switchover Direction of rotation monitoring High water alarm with forced switch-on of the connected pumps Dry-running protection Fault memory for 10 error messages including the type of fault Operating mode “Ex” for loading preset values for “Ex” applications (please note information given under “Configuration”!) Equipment Display of the current operating status and data as well as faults, using the LCD display and LEDs Symbol-based menu navigation Configuration of operating parameters and operation via operating knob Remote access via ModBus Integrated alarm buzzer Inputs 1x analogue precision input 4 – 20 mA for level control with level sensor 3x digital inputs for level control with float switch 1x digital input for low water level with float switch (dry-running protection) 1x digital input for high water signal with float switch (high water alarm) 2x inputs for thermal winding protection monitoring with bimetallic temperature sensor - connection of PTC sensors is not possible! 2x inputs for connecting moisture sensors (e.g.: Motor compartment leakage or sealing chamber monitoring) 1x digital input for External On/Off for remote activation and deactivation of automatic mode Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the individual run signal (EBM) per pump 1x potential-free contact* for the individual fault signal (ESM) per pump 1x 24 VDC output for connecting an external alarm signal 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Configuration Signal transmitter to be provided on-site. Switchgears are not protected against explosions and may only be used outside hazardous areas. Signal transmitters within hazardous areas must be connected through an intrinsically safe circuit, e.g. Zener barrier or Ex cut-off relay. Pumps within hazardous areas can be directly connected. Notice! Printed installation and operating instructions have been enclosed with the product in the following languages: DE, EN, FR, PL, RU. All language versions have been saved as PDF files on an enclosed USB stick or can be downloaded at https://qr.wilo.com/1401. A notebook or tablet with Adobe Reader is required for installing and commissioning.
	EC-L-2x12A-MT34-DOL-WM-EMS-IPS	2543222
	Switchgear with microcontroller for level-dependent control of two submersible pumps with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating knob. Functions Two different operating modes for a broad field of application: “Drain” operating mode: For draining sewage chambers “Fill” operating mode: For filling water tanks and rainwater storage tanks Configurable overload protection Thermal motor monitoring Pump kick function Adjustable follow-up time Automatic pump alteration Service life optimisation Standby pump Automatic fault-actuated switchover Direction of rotation monitoring High water alarm with forced switch-on of the connected pumps Dry-running protection Fault memory for 10 error messages including the type of fault Operating mode “Ex” for loading preset values for “Ex” applications (please note information given under “Configuration”!) Equipment Display of the current operating status and data as well as faults, using the LCD display and LEDs Symbol-based menu navigation Configuration of operating parameters and operation via operating knob Remote access via ModBus Integrated alarm buzzer Integrated pressure transducer Inputs 1x analogue precision input 4 – 20 mA for level control with level sensor 3x digital inputs for level control with float switch 1x input for level control with a dynamic pressure bell 1x digital input for low water level with float switch (dry-running protection) 1x digital input for high water signal with float switch (high water alarm) 2x inputs for thermal winding protection monitoring with bimetallic temperature sensor - connection of PTC sensors is not possible! 2x inputs for connecting moisture sensors (e.g.: Motor compartment leakage or sealing chamber monitoring) 1x digital input for External On/Off for remote activation and deactivation of automatic mode Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the individual run signal (EBM) per pump 1x potential-free contact* for the individual fault signal (ESM) per pump 1x 24 VDC output for connecting an external alarm signal 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Configuration Signal transmitter to be provided on-site. Switchgears are not protected against explosions and may only be used outside hazardous areas. Signal transmitters within hazardous areas must be connected through an intrinsically safe circuit, e.g. Zener barrier or Ex cut-off relay. Pumps within hazardous areas can be directly connected. Notice! Printed installation and operating instructions have been enclosed with the product in the following languages: DE, EN, FR, PL, RU. All language versions have been saved as PDF files on an enclosed USB stick or can be downloaded at https://qr.wilo.com/1401. A notebook or tablet with Adobe Reader is required for installing and commissioning.
	EC-L-3x12A-MT34-DOL-WM	2543230
	Switchgear with microcontroller for level-dependent control of three submersible pumps using analogue signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating knob. Functions Two different operating modes for a broad field of application: “Drain” operating mode: For draining sewage chambers “Fill” operating mode: For filling water tanks and rainwater storage tanks Configurable overload protection Thermal motor monitoring Pump kick function Adjustable follow-up time Automatic pump alteration Service life optimisation Standby pump Automatic fault-actuated switchover Direction of rotation monitoring High water alarm with forced switch-on of the connected pumps Dry-running protection Fault memory for 10 error messages including the type of fault Operating mode “Ex” for loading preset values for “Ex” applications (please note information given under “Configuration”!) Equipment Display of the current operating status and data as well as faults, using the LCD display and LEDs Symbol-based menu navigation Main switch Configuration of operating parameters and operation via operating knob Remote access via ModBus Integrated alarm buzzer Inputs 1x analogue precision input 4 – 20 mA for level control with level sensor 3x digital inputs for level control with float switch (max. 2 pumps) 1x digital input for low water level with float switch (dry-running protection) 1x digital input for high water signal with float switch (high water alarm) 3x inputs for thermal winding monitor with bimetallic temperature sensor, connection of PTC sensors is not possible! 3x inputs for connecting moisture sensors (e.g.: Motor compartment leakage or sealing chamber monitoring) 1x digital input for External On/Off for remote activation and deactivation of automatic mode Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the individual run signal (EBM) per pump 1x potential-free contact* for the individual fault signal (ESM) per pump 1x 24 VDC output for connecting an external alarm signal 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Configuration Signal transmitter to be provided on-site. Switchgears are not protected against explosions and may only be used outside hazardous areas. Signal transmitters within hazardous areas must be connected through an intrinsically safe circuit, e.g. Zener barrier or Ex cut-off relay. Pumps within hazardous areas can be directly connected. Notice! Printed installation and operating instructions have been enclosed with the product in the following languages: DE, EN, FR, PL, RU. All language versions have been saved as PDF files on an enclosed USB stick or can be downloaded at https://qr.wilo.com/1401. A notebook or tablet with Adobe Reader is required for installing and commissioning.
	EC-L-1x12A-MT34-DOL-WM-EX	2553570
	Switchgear with microcontroller for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating knob. Functions Two different operating modes for a broad field of application: “Drain” operating mode: For draining sewage chambers “Fill” operating mode: For filling water tanks and rainwater storage tanks Configurable overload protection Thermal motor monitoring Pump kick function Adjustable follow-up time Direction of rotation monitoring High water alarm with forced switch-on of the connected pump Dry-running protection Fault memory for 10 error messages including the type of fault Operating mode “Ex” for loading preset values for “Ex” applications (please note information given under “Configuration”!) Equipment Display of the current operating status and data as well as faults, using the LCD display and LEDs Symbol-based menu navigation Configuration of operating parameters and operation via operating knob Main switch Remote access via ModBus Integrated alarm buzzer Inputs 1x analogue precision input 4 – 20 mA for level control with level sensor 2x digital inputs for level control with float switch 1x digital input for low water level with float switch (dry-running protection) 1x digital input for high water signal with float switch (high water alarm) 1x input for thermal winding monitor with bimetallic temperature sensor – connection of PTC sensors is not possible! 1x input for connecting moisture sensors (e.g.: Motor compartment leakage or sealing chamber monitoring) 1x digital input for External On/Off for remote activation and deactivation of automatic mode Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the individual run signal (EBM) per pump 1x potential-free contact* for the individual fault signal (ESM) per pump 1x 24 VDC output for connecting an external alarm signal 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Configuration Signal transmitter to be provided on-site. Switchgears are not protected against explosions and may only be used outside hazardous areas. Pumps and signal transmitters within hazardous areas can be directly connected. Notice! Printed installation and operating instructions have been enclosed with the product in the following languages: DE, EN, FR, PL, RU. All language versions have been saved as PDF files on an enclosed USB stick or can be downloaded at https://qr.wilo.com/1401. A notebook or tablet with Adobe Reader is required for installing and commissioning.
	EC-L-2x12A-MT34-DOL-WM-EX	2553571
	Switchgear with microcontroller for level-dependent control of two submersible pumps with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating knob. Functions Two different operating modes for a broad field of application: “Drain” operating mode: For draining sewage chambers “Fill” operating mode: For filling water tanks and rainwater storage tanks Configurable overload protection Thermal motor monitoring Pump kick function Adjustable follow-up time Automatic pump alteration Service life optimisation Standby pump Automatic fault-actuated switchover Direction of rotation monitoring High water alarm with forced switch-on of the connected pumps Dry-running protection Fault memory for 10 error messages including the type of fault Operating mode “Ex” for loading preset values for “Ex” applications (please note information given under “Configuration”!) Equipment Display of the current operating status and data as well as faults, using the LCD display and LEDs Symbol-based menu navigation Main switch Configuration of operating parameters and operation via operating knob Remote access via ModBus Integrated alarm buzzer Inputs 1x analogue precision input 4 – 20 mA for level control with level sensor 3x digital inputs for level control with float switch 1x digital input for low water level with float switch (dry-running protection) 1x digital input for high water signal with float switch (high water alarm) 2x inputs for thermal winding protection monitoring with bimetallic temperature sensor - connection of PTC sensors is not possible! 2x inputs for connecting moisture sensors (e.g.: Motor compartment leakage or sealing chamber monitoring) 1x digital input for External On/Off for remote activation and deactivation of automatic mode Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the individual run signal (EBM) per pump 1x potential-free contact* for the individual fault signal (ESM) per pump 1x 24 VDC output for connecting an external alarm signal 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Configuration Signal transmitter to be provided on-site. Switchgears are not protected against explosions and may only be used outside hazardous areas. Pumps and signal transmitters within hazardous areas can be directly connected. Notice! Printed installation and operating instructions have been enclosed with the product in the following languages: DE, EN, FR, PL, RU. All language versions have been saved as PDF files on an enclosed USB stick or can be downloaded at https://qr.wilo.com/1401. A notebook or tablet with Adobe Reader is required for installing and commissioning.
	EC-L-3x12A-MT34-DOL-WM-EX	2553572
	Switchgear with microcontroller for level-dependent control of three submersible pumps using analogue signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating knob. Functions Two different operating modes for a broad field of application: “Drain” operating mode: For draining sewage chambers “Fill” operating mode: For filling water tanks and rainwater storage tanks Configurable overload protection Thermal motor monitoring Pump kick function Adjustable follow-up time Automatic pump alteration Service life optimisation Standby pump Automatic fault-actuated switchover Direction of rotation monitoring High water alarm with forced switch-on of the connected pumps Dry-running protection Fault memory for 10 error messages including the type of fault Operating mode “Ex” for loading preset values for “Ex” applications (please note information given under “Configuration”!) Equipment Display of the current operating status and data as well as faults, using the LCD display and LEDs Symbol-based menu navigation Main switch Configuration of operating parameters and operation via operating knob Remote access via ModBus Integrated alarm buzzer Inputs 1x analogue precision input 4 – 20 mA for level control with level sensor 3x digital inputs for level control with float switch (max. 2 pumps) 1x digital input for low water level with float switch (dry-running protection) 1x digital input for high water signal with float switch (high water alarm) 3x inputs for thermal winding monitor with bimetallic temperature sensor, connection of PTC sensors is not possible! 3x inputs for connecting moisture sensors (e.g.: Motor compartment leakage or sealing chamber monitoring) 1x digital input for External On/Off for remote activation and deactivation of automatic mode Outputs 1x potential-free contact* for the collective run signal (SBM) 1x potential-free contact* for the collective fault signal (SSM) 1x potential-free contact* for the individual run signal (EBM) per pump 1x potential-free contact* for the individual fault signal (ESM) per pump 1x 24 VDC output for connecting an external alarm signal 1x analogue output 0-10 V for the output of the actual level value *NOTICE: Power supply must be provided by the customer! Configuration Signal transmitter to be provided on-site. Switchgears are not protected against explosions and may only be used outside hazardous areas. Pumps and signal transmitters within hazardous areas can be directly connected. Notice! Printed installation and operating instructions have been enclosed with the product in the following languages: DE, EN, FR, PL, RU. All language versions have been saved as PDF files on an enclosed USB stick or can be downloaded at https://qr.wilo.com/1401. A notebook or tablet with Adobe Reader is required for installing and commissioning.
Switchgear Wilo-Control MS-Lift
Switchgear Wilo-Control MS-Lift

Rexa FIT-V06-214A/21M015-523/A

Installation and operating instructions

Wilo-Rexa FIT

Group Statement

Group Statement REACH

Level control with float switch (10)

Switchgear Wilo-Control MS-Lift

Switchgear Wilo-Control MS-Lift

Battery 9V,200mA

Battery 9V,200mA

Float switch MS1

Float switch MS1

Float switch WA

Float switch WA

Signal horn

Signal horn

Flash light

Flash light

Level control with level sensor (17)

Switchgear Wilo-Control EC-Lift

Switchgear Wilo-Control EC-Lift

Battery 9V,200mA

Battery 9V,200mA

Level sensor

Level sensor

Cable clamp

Cable clamp

Signal horn

Signal horn

Flash light

Flash light

Level control with dynamic pressure system (9)

Switchgear Wilo-Control EC-Lift

Switchgear Wilo-Control EC-Lift

Battery 9V,200mA

Battery 9V,200mA

Dynamic pressure system

Dynamic pressure system

Signal horn

Signal horn

Flash light

Flash light

Mains-independent alarm signal (7)

Float switch WA

Float switch WA

DrainAlarm

DrainAlarm

Signal horn

Signal horn

Flash light

Flash light

Pump chamber WS 1100 (9)

Sump length extension

Sump length extension

Pump cover

Pump cover

Clamp bolting

Clamp bolting

Shut-off device for wastewater and sewage

Shut-off device for wastewater and sewage

DrainLift WS 1100

DrainLift WS 1100

Simple mains connection (5)

Connection cable

Connection cable

Stationary wet well installation DN 65 (17)

Pipe elbow 90° flange/flange

Pipe elbow 90° flange/flange

Y-piece

Y-piece

Suspension unit

Suspension unit

Sling chain, galvanized steel

Sling chain, galvanized steel

Sling chain, stainless steel

Sling chain, stainless steel

Guide bracket

Guide bracket

Guide tube

Guide tube