Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Rexa PRO-C08-412A/21M011X523/O | Wilo

Rexa PRO-C08-412A/21M011X523/O

Article number: 6098485
NEW
Technical data
Hydraulic data
Maximum operating pressure p 1 bar
Discharge port DN 80
Free ball passage of the hydraulics 55 mm
Hydraulics type Single-channel impeller
Max. immersion depth 20 m
Max. delivery head Hmax 9.8 m
Max. volume flow Qmax 63.0 m³/h
Min. fluid temperature Tmin 3 °C
Max. fluid temperature Tmax 40 °C
Min. ambient temperature Tmin 3 °C
Max. ambient temperature Tmax 40 °C
Motor data
Motor Identifier P 13.M-08/EAD1X2-M Ex 1,1kW
Mains connection 1~230 V, 50 Hz
Voltage tolerance ±10 %
Rated power P2 1.1 kW
Power consumption P1 max 1.60 kW
Rated current IN 7.2 A
Starting current I 29 A
Operating mode (immersed) S1
Operating mode (non-immersed) S2-30 min
Rated speed n 2899 1/min
Power factor cos φ100 0.97
Activation type Direct On Line (DOL)
Number of poles 2
Max. switching frequency t 60 1/h
Insulation class F
Protection class motor IP68
Cable
Connection cable length L 10 m
Cable type H07RN-F
Cable cross-section 7G1,5 mm²
Type of connection cable Detachable
Equipment/function
Mains plug no
Float switch no
Macerator no
Explosion protection type ATEX
Motor protection Bimetall
Motor, leakage detection yes
Sealing chamber, leakage detection optional
Leakage chamber, leakage detection no
Materials
Pump housing Grey cast iron
Impeller Ductile cast iron
Shaft Stainless steel
Sealing on pump side Silicon carbide
Sealing on motor side NBR
Gasket material NBR
Motor housing Grey cast iron
Installation dimensions
Inlet connection DN 80
Outlet connection DN 80

Wilo-Rexa PRO C08-41.. - portable wet well installation

Product data
Brand Wilo
Product description Rexa PRO-C08-412A/21M011X523/O
Article number 6098485
EAN number 4062679390147
Colour Green
Minimum order quantity 1
Date of sales availability 2024-10-01
Packaging
Packaging type One-way pallet
Packaging property Transport packaging
Pieces per pallet 1
Number per layer 1
Dimension, weight
Length with packaging 400 mm
Length L 239 mm
Height with packaging 935 mm
Height H 525 mm
Width with packaging 600 mm
Width W 269 mm
Gross weight, approx. m 53 kg
Net weight, approx. m 51 kg
Tender text

Fully submersible sewage pump for stationary and transportable wet well installation for pumping wastewater and sewage containing faeces (within the scope of validity of (DIN) EN 12050-1). Unit made completely of cast iron. The sealing on the fluid and on the motor side is performed by two bidirectional mechanical seals. Surface-cooled motor in alternating current design with sealing chamber, thermal motor monitoring and leakage detection for the motor compartment and Ex rating. Detachable connection cable with longitudinally watertight cable inlet, capacitor box and bare cable end.

Operating Data
Product data
Hydraulics type Single-channel impeller
Free ball passage of the hydraulics 55 mm
Maximum operating pressure PN 1 bar
Max. immersion depth 20 m
Fluid temperature T 3 °C
Motor data
Motor design Submersible motor – surface-cooled
Mains connection 1~230 V, 50 Hz
Voltage tolerance ±10 %
Power factor cos φ100 0.97
Rated power P2 1.1 kW
Power consumption P1 max 1.60 kW
Rated current IN 7.2 A
Starting current I 29 A
Activation type Direct On Line (DOL)
Number of poles 2
Rated speed n 2899 1/min
Max. switching frequency t 60 1/h
Insulation class F
Protection class IP68
Operating mode (immersed) S1
Operating mode (non-immersed)
  • S2-30 min
  • S3-25%
Cable
Connection cable length L 10 m
Cable type H07RN-F
Cable cross-section 7G1,5 mm²
Mains plug no
Type of connection cable Detachable
Equipment/function
Float switch no
Macerator no
Explosion protection type ATEX
Motor protection Bimetall
Motor, leakage detection yes
Sealing chamber, leakage detection optional
Leakage chamber, leakage detection no
Materials
Pump housing Grey cast iron
Impeller Ductile cast iron
Shaft Stainless steel
Sealing on pump side QQPGG
Sealing on motor side BXPFF
Gasket material NBR
Motor housing Grey cast iron
Installation dimensions
Pipe connection on the suction side DNs DN 80
Pipe connection on the discharge side DNd DN 80
Ordering information
Brand Wilo
Product description Rexa PRO-C08-412A/21M011X523/O
Net weight, approx. m 51 kg
Article number 6098485
Documents

Installation and operating instructions

Wilo-Rexa PRO

Article Number 6063548
Edition 2019-02
Number of pages 48
Language en
PDF (3 MB)

Group Statement

Group Statement REACH

Edition 2021-05
Number of pages 5
Language language neutral
PDF (327 KB)
Accessory

Level control with float switch (17)

Level control with level sensor (20)

Level control with dynamic pressure system (9)

Mains-independent alarm signal (6)

Stationary wet well installation DN 80 (13)

Portable wet well installation DN 80 (10)

Fittings (6)

Hoses / hose joints (31)

Installation/setup (40)

Pipes/pipe joints (5)

Pump chamber (1)

Pump control (14)

Pump control/accessories (9)

Alarm signal (7)

Cable (2)

Cable distribution (6)

Level control (26)

Level control/accessories (8)

Motor protection (3)

Services

With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.

Read more

Recommended services

Commissioning
Commissioning Drainage pumps
    
2219491

For perfect functioning of the pump(s) / system(s), it is recommended to have the commissioning carried out by the works' own WILO SE Customer Service Department. Optimum setting and efficient operation of the system are ensured as a result. Commissioning is comprised of the following points:

  • Commissioning of system(s) according to checklist
  • Parameterisation and setting of switchgear
  • Testing and adaptation of initial compressing of pressure tanks (filling up to 80 litres incl.)
  • Functional check of fitted system(s)
  • Practice-oriented operation instruction
  • Wilo commissioning protocol

The price for commissioning only applies to system(s) which have been installed in accordance with the installation and operating instructions and state-of-the-art technology. No costs for any materials which may be required are included.

Wilo-Live Assistant