Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Wilo-Rexa SUPRA | Wilo

Wilo-Rexa SUPRA

Transport sewage efficiently and economically. Ready for networking in digital wastewater management with Wilo-DDI.

Your advantages
Wilo-Rexa SUPRA-V

Transport sewage efficiently and economically. Ready for networking in digital wastewater management with Wilo-DDI.

“Whether untreated or pre-treated sewage – the submersible pumps of the Wilo-Rexa SUPRA series have been developed for the various requirements in modern sewage pumping.

Vortex, single-channel or multi-channel impeller, die Wilo-Rexa SUPRA always provides a combination of clogging resistance and energy efficiency. As such, the Rexa SUPRA is ideal for safe and economical sewage transport.

In combination with the optionally available IE3 motors (in accordance with IEC 60034-30-1), the Wilo-Rexa SUPRA also reduces operating costs.

The Wilo-DDI can be integrated to meet the requirements of digital connectivity. The Wilo-Rexa SUPRA thus offers all the features of modern communication connectivity and makes everyday work really easy.”


Your advantages

  • Non-clog and low-vibration hydraulics design ensures a high level of operational reliability
  • A high level of hydraulic efficiency and optional IE3 motor technology (based on IEC 60034-30-1) keep operating costs low
  • Extensive configuration options guarantee customised solutions
  • Various Ceram coatings ensure a long service life in abrasive and corrosive fluids
  • Simple integration into the system control and monitoring of the pump with the optional Wilo-DDI:
    • Easy connectivity via Ethernet interface
    • Easy to integrate into existing control technology thanks to the use of standard protocols
    • Day-to-day time savings and reduced workload thanks to convenient remote monitoring of the operating state and digital tools such as the rating plate, maintenance logbook and user manual
Series description
Wilo-Rexa SUPRA-V

Design

Submersible pump for stationary and portable wet well installation as well as stationary dry well installation in continuous operation.

Liquid

For pumping in commercial areas of:

  • Untreated sewage
  • Sewage containing faeces
  • Process sewage
  • Wastewater (with small amounts of sand and gravel)

Equipment/function

  • Heavy-duty version made of cast iron
  • Sealing chamber for leakage absorption thanks to the mechanical seal on the fluid side
  • Leakage chamber for leakage absorption thanks to the mechanical seal on the motor side (motor-dependent)
  • Motor-dependent monitoring devices:
    • Winding temperature using bimetallic sensor or PTC sensor
    • Leakage detection for sealing and leakage chamber as well as motor/terminal room

Typekey

Example:

Wilo-Rexa SUPRA-M30-418A + T 34-6/50KEx-E3

Hydraulics:

Rexa SUPRA-M30-418A

Rexa

Submersible sewage pump

SUPRA

Series

M

Impeller shape:

  • V = vortex impeller
  • C = single-channel impeller
  • M = multi-channel impeller

30

Nominal diameter of discharge port, e.g. DN 300

41

Performance indicator

8

Characteristic curve number

A

Material version: Standard version

Motor:

T 34-6/50KEx-E3

T

Motor design:

  • T = surface-cooled motor
  • FK/FKT = self-cooling motor with active cooling system

34

Size

6

Number of poles

50

x10 = package length in mm

K

Seal version:

  • H = rotary shaft seal/mechanical seal
  • G = two separate mechanical seals
  • K = block seal cartridge with two mechanical seals

Ex

Ex-rated

E3

Motor efficiency class (derived from IEC 60034-30)

  • E3 = IE3
  • E4 = IE4

Technical data

  • Mains connection: 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Non-immersed operating mode:
    • T motor: S2
    • FK motor: S1
    • FKT motor: S1
  • Protection class: IP68
  • Insulation class: H
  • Fluid temperature: 3 … 40 °C (37 … 104 °F)
  • Max. immersion depth: 20 m (66 ft)

Materials

  • Hydraulic and motor housing: EN-GJL-250 (ASTM A48 Class 35/40B) or EN-GJS-500-7 (ASTM A536 70-50-05)
  • Impeller: EN-GJL-250 (ASTM A48 Class 35/40B) or EN-GJS-500-7 (ASTM A536 70-50-05)
  • Seals:
    • Static: NBR (nitrile)
    • On the fluid side: SiC/SiC
    • On the motor side: SiC/SiC or C/Cr
  • Shaft: Stainless steel AISI 1.4021 (420)

Construction

Hydraulics

The outlet on the discharge side is designed as horizontal flange connection. The maximum possible dry matter is 8 %. The following impeller shapes are available:

  • Vortex impeller
  • Single-channel impeller
  • Multi-channel impeller

T motor

Surface-cooled submersible motor without cooling system for wet well installation. The waste heat of the motor is dissipated directly to the surrounding fluid via the housing parts. The motor itself is dry. Permanently lubricated rolling bearings are used as motor bearings. The connection cable is longitudinally watertight and has bare cable ends. Depending on the size and the motor power, the motors can be installed dry in short-time duty.

FK motor

Self-cooling submersible motor with active cooling system for wet well and dry well installation. For cooling, the motor is filled with medicinal white oil. An impeller on the motor shaft allows the coolant to circulate continuously. The cooling flange transfers the waste heat to the pumped fluid. The cooling system itself is not pressurised. Permanently lubricated rolling bearings are used as motor bearings. The connection cable is longitudinally watertight and has bare cable ends.

FKT motor

Self-cooling submersible motor with active cooling system for wet well and dry well installation. The separate cooling system is filled with a water-glycol mixture. An impeller circulates the coolant continuously. The cooling flange transfers the waste heat to the pumped fluid. The motor compartment is dry, and the cooling system itself is pressureless. Permanently lubricated rolling bearings are used as motor bearings. The connection cable is longitudinally watertight and has bare cable ends.

Seal

All the motors have a sealing chamber to protect the motor from fluid entering through the seal on the fluid side. The sealing chamber is accessible from the outside. On request, the sealing chamber can be monitored with a pencil electrode. Fluid-side and motor-side sealing is possible in the following versions depending on the motor type:

  • Version H: Mechanical seal for the fluid side, rotary shaft seal for the motor side
  • Version G: Two independently-acting mechanical seals
  • Version K: Block seal cartridge with two independently acting mechanical seals

Operating fluids

All operating fluids are potentially biodegradable and harmless to the environment:

  • White oil
  • Water-glycol mixture (water-polluting class 1 according to VwVwS)

Motor efficiency classes (based on IEC 60034-30)

In addition to the standard motors, IE3 motors are also available. The motors are based on the same design as the standard motors. This means that the motors are identical in terms of equipment and function.

Scope of delivery

  • Pump
  • Fitted accessories as ordered
  • Installation and operating instructions

Options

  • Standard voltages and special voltages
  • Operation in fluids up to 60 °C (140 °F)
  • Motor-dependent monitoring devices:
    • Winding monitoring with PTC sensor
    • Sealing chamber
    • Motor/terminal room
    • Motor bearing temperature
    • Oscillation sensor
  • Ceram coating for abrasive and corrosive fluids
  • Digital Data Interface for simple integration into the system controls and monitoring of the pump:
    • Easy connectivity via Ethernet interface
    • Easy to integrate into existing control technology by using standard protocols
    • Day-to-day time savings and reduced workload thanks to convenient remote monitoring of the operating state
  • Ex-rated according to
    • ATEX
    • FM
    • CSA-Ex
    • IECEx

Accessories

  • Suspension unit for wet well installation
  • Pump support foot for portable installation
  • Foot elbow for dry well installation
  • Level control devices
  • External pencil electrode for monitoring the sealing chamber
  • Fixation sets with anchor bolts
  • Fixation accessories and chains
  • Switchgear, relays and plugs
Documents

Installation and operating instructions

Wilo Motor T 17.3, 20.2: EMU FA, Rexa SUPRA, Rexa SOLID

Article Number 6086016
Edition 2019-10
Number of pages 104
Language en, zh
PDF (4 MB)

Wilo Motor T 17.3, 20.2: EMU FA, Rexa SUPRA, Rexa SOLID

Article Number 6086012
Edition 2019-10
Number of pages 56
Language en
PDF (3 MB)

Wilo Motor HC 20.1 + EMU FA, Rexa SUPRA, Rexa SOLID

Article Number 6073324
Edition 2019-01
Number of pages 52
Language en
PDF (3 MB)

Wilo Motor FKT 20.2, 27.1, 27.2: EMU FA, Rexa SUPRA, Rexa SOLID

Article Number 6088784
Edition 2019-10
Number of pages 108
Language en, zh
PDF (4 MB)

Wilo Motor FKT 20.2, 27.1, 27.2: EMU FA, Rexa SUPRA, Rexa SOLID

Article Number 6086014
Edition 2019-10
Number of pages 60
Language en
PDF (3 MB)

Wilo Motor FK 17.1, FK 202, FK 34, FK 42 + EMU FA, Rexa SUPRA, Rexa SOLID

Article Number 6074704
Edition 2019-01
Number of pages 52
Language en
PDF (3 MB)

Wilo Motor T 12 ... 72 + EMU FA, Rexa SUPRA, Rexa SOLID

Article Number 6067561
Edition 2019-01
Number of pages 64
Language en
PDF (5 MB)

Wilo DDI-I

Article Number 6086017
Edition 2023-06
Number of pages 108
Language en
PDF (8 MB)

Certification booklet

Wilo FK motor + EMU FA, Wilo FK motor + Rexa SUPRA

Article Number 6074692
Edition 2021-07
Number of pages 60
Language language neutral
PDF (7 MB)

Wilo FKT motor + EMU FA, Wilo FKT motor + Rexa SUPRA, Wilo FKT motor + Rexa SOLID

Article Number 6074691
Edition 2021-07
Number of pages 96
Language language neutral
PDF (9 MB)

Wilo T motor + EMU FA, Wilo T motor + Rexa SUPRA, Wilo T motor + Rexa SOLID

Article Number 6072704
Edition 2021-07
Number of pages 116
Language language neutral
PDF (10 MB)

Brochure

Product information Wilo-EFC. Powerful, flexible, cost-efficient.

Number of pages 8
Language en
PDF (8 MB)

Group Statement

Group Statement REACH

Edition 2021-05
Number of pages 5
Language language neutral
PDF (327 KB)