AL 1053-046 | Wilo

AL 1053-046

Number of results: 3

Flow

Head / Pump pressure

Product design type	Glandless premium smart-pump	Glanded standard single pump	Glandless standard high-efficiency pump	Existing pump



Description
Product description	Stratos MAXO 50/0,5-9 PN6/10	VeroLine-IPL 50/105-0,12/4	Yonos MAXO 50/0,5-9 PN 6/10	AL 1053-046
Article number	2164588	2150344	2120650	-
Series	Wilo-Stratos MAXO	Wilo-VeroLine-IPL	Wilo-Yonos MAXO	-
Mains connection	1~230 V ±10%, 50/60 Hz	3~400 V ±10%, 50 Hz	1~230 V ±10%, 50/60 Hz	-
Port-to-port length l0	280 mm	280 mm	280 mm	280 mm
Pump connection	DN 50	DN 50	DN 50	-
Display	Graphic colour display (4.3 inches)	-	LED segment display	-
Comment	Fits without modifications Check electrical connection	Fits without modifications	Fits without modifications Check electrical connection	-
Result summary
Function
Control mode	Δp-v for variable differential pressure	-	Δp-v for variable differential pressure	-
	Δp-c for constant differential pressure	-	Δp-c for constant differential pressure	-
	Q limit for limiting the maximum volume flow	-	-	-
	Dynamic Adapt plus	-	-	-
	ΔT-const. for constant differential temperature control	-	-	-
	T-const. for constant temperature control	-	-	-
	Constant Q for constant volume flow control	-	-	-
	Multi Flow Adaptation	-	-	-
	Δ T-const. for constant differential temperature control	-	-	-
	User-defined PID control	-	-	-
	Constant speed (n-const.)	-	-	-
	-	-	Constant speed (3 speed stages)	-
Special features of the series	Heating/Cooling switching	-	-	-
	Night set back	-	-	-
	Heat quantity measurement	-	-	-
	Cooling quantity measurement	-	-	-
	Key locking function	-	-	-
	No-Flow Stop	-	-	-
	Reset function to factory setting	-	-	-
	Adjustable volume flow limiter	-	-	-
	Ability to save and restore configured pump settings (3 restoration points)	-	-	-
	Fault message and warning message in plain text including suggested remedy	-	-	-
Multi pump operation	Main/Standby	-	-	-
	Parallel operation	-	-	-
	-	-	Main/Standby (with Connect Module Yonos MAXO)	-
Measurement value logging	Heat and cooling capacity measurement	-	-	-
Display	Setpoint	-	Setpoint	-
	Actual delivery head	-	-	-
	Actual volume flow	-	-	-
	Actual power consumption	-	-	-
	Energy consumption	-	-	-
	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	-	-	-
	Warning messages in plain text (display status: yellow)	-	-	-
	Error messages in plain text (display: red)	-	-	-
	Pump venting (display status: blue)	-	-	-
	Control mode	-	-	-
	Active influences (e.g. STOP)	-	-	-
	-	-	Fault signals (error codes)	-
Display (can also be selected)	Speed	-	-	-
	Heating quantity	-	-	-
	Cooling quantity	-	-	-
	Operating hours	-	-	-
	Mains voltage	-	-	-
	Warning message	-	-	-
	Error message	-	-	-
Pump venting function	Yes	-	-	-
Dry-running detection	yes	-	-	-
Equipment
Thermal insulation shell	Yes	-	As accessory	-
Cold water insulation shell	As accessories	-	-	-
Quick electrical connection	Wilo Connector	-	Wilo plug	-
Blocking-current proof motor	yes	-	yes	-
Particle filter	yes	-	yes	-
Key lock	yes	-	-	-
Fluid temperature sensor	Integrated	-	-	-
Connectivity
Analogue signal as standard	0-10 V	-	-	-
	2-10 V	-	-	-
	4-20 mA	-	-	-
	0-20 mA	-	-	-
	PT1000	-	-	-
Digital output	SSM	-	SSM	-
	SBM	-	-	-
Digital input	Ext. OFF	-	-	-
	Ext. MIN	-	-	-
	Ext. MAX	-	-	-
	MANUAL (BMS-OFF)	-	-	-
	Key lock	-	-	-
	Switchover between heating/cooling mode	-	-	-
	-	-	Ext. OFF (via accessories Wilo-Connect module Yonos MAXO)	-
Bus communication via additional accessories	BACnet MS/TP	-	-	-
	LON	-	-	-
	Modbus RTU	-	-	-
	CANopen	-	-	-
	PLR	-	-	-
	BACnet IP	-	-	-
	Modbus TCP	-	-	-
Access via the Wilo-Assistant app	Yes	-	-	-
Connection for Wilo-Smart Cloud	Via Wilo-Smart Gateway	-	-	-
wire data exchange and remote operation	Bluetooth	-	-	-
Motor data
Phases	1	3	1	3
Mains connection	1~230 V, 50/60 Hz	3~400 V, 50 Hz	1~230 V, 50/60 Hz	3~400 V, 50 Hz
Energy efficiency index (EEI)	≤0.17	-	≤0.20	-
Min current I_min	0.2 A	-	0.17 A	-
Max current I_max	2.4 A	-	2.15 A	-
Rated power P₂	456 W	120 W	400 W	-
Min. speed n_min	650 1/min	-	950 1/min	-
Max. speed n_max	3050 1/min	-	4100 1/min	-
Power consumption P_{1 min}	10 W	-	15 W	-
Power consumption P_{1 max}	550 W	-	490 W	-
Emitted interference	EN 61800-3;2004+A1;2012 /residential area (C1)	-	EN 61800-3;2004+A1;2012 /residential area (C1)	-
Interference resistance	EN 61800-3;2004+A1;2012 /industrial environment (C2)	-	EN 61800-3;2004+A1;2012 /industrial environment (C2)	-
Insulation class	F	F	F	-
Protection class	IPX4D	IP55	IPX4D	-
Materials
Material	Grey cast iron	Grey cast iron	Grey cast iron	-
Impeller	PPS-GF40	PPE/PS-GF30	PPS-GF40	-
Shaft	1.4028, DLC-coated	Stainless steel	Stainless steel	-
Bearing	Carbon, antimony-impregnated	-	Carbon-graphite	-
Pipe connection
Inlet connection	DN 50	DN 50	DN 50	DN 50
PN connection on suction side	PN 6/10	PN 10	PN 6/10	PN 10
Outlet connection	DN 50	DN 50	DN 50	DN 50
PN connection on discharge side	PN 6/10	PN 10	PN 6/10	PN 10
Dimension, weight
Length with packaging	600 mm	600 mm	600 mm	-
Length L	420 mm	379 mm	292 mm	-
Height with packaging	394 mm	525 mm	400 mm	-
Height H	280 mm	280 mm	334 mm	-
Width with packaging	400 mm	400 mm	394 mm	-
Width W	250 mm	188 mm	165 mm	-
Gross weight, approx. m	22.2 kg	24 kg	16.1 kg	-
Net weight, approx. m	18.8 kg	20 kg	14.2 kg	-
Ordering information
Product description	Stratos MAXO 50/0,5-9 PN6/10	VeroLine-IPL 50/105-0,12/4	Yonos MAXO 50/0,5-9 PN 6/10	AL 1053-046
Brand	Wilo	Wilo	Wilo	Lowara/Xylem
EAN number	4048482699653	4048482488424	4048482235967	-
Article number	2164588	2150344	2120650	-

Data sheet

Description
Product description	AL 1053-046
Brand	Lowara/Xylem
Port-to-port length l0	280 mm

Motor data
Phases	3
Mains connection	3~400 V, 50 Hz

Pipe connection
Inlet connection	DN 50
PN connection on suction side	PN 10
Outlet connection	DN 50
PN connection on discharge side	PN 10

Take advantage of the latest replacement guide

The current replacement guide on all glandless pumps for heating and drinking water applications makes choosing the right pump easier for you. Here, you will find a suitable new Wilo pump for all known pumps built after 1975.

After entering your old pump data, select the current pump type.