Wilo-Initial Waste | Wilo

Wilo-Initial Waste

Wilo-Initial Waste

De voordelen voor u

Operationally reliable due to self-switched motor protection
Easy operation due to fitted float switch

Aanbevolen dienstverlening

Bouwtype

Submersible pump for fully automatic operation in portable wet well installation.

Vloeistoffen

For the pumping in domestic areas of:

Sewage not containing faeces
Wastewater (with small amounts of sand and gravel)

Uitrusting/functie

Self-switching thermal motor monitoring
Integrated capacitor
Fitted float switch

Type-aanduiding

Example	Wilo-Initial WASTE 14-9/522/AEF-10M
Initial	Series
WASTE	Sewage pump
14	Nominal flow in m³/h
9	Nominal head in m
5	Mains frequency: 5 = 50 Hz 6 = 60 Hz
22	Rated voltage: 22 = 1~220 V 23 = 1~230 V
A	With float and plug
EF	Plug type: EF = CEE7/7 B = type B I = type I M = type M
10M	Cable length

Technische gegevens

Mains connection (depending on product type):
- 1~230 V, 50 Hz
- 1~220 V,50 Hz
- 1~220 V,60 Hz
Submerged operating mode: S1
Non-immersed operating mode: S3 25%
Protection class: IP68
Insulation class: F
Fluid temperature: 3 ... +40 °C (37 ... 104 °F)

Materialen

Hydraulics housing: PP
Impeller: PA6-GF30
Motor housing: 1.0038 (steel)
Seal:
- Pump/motor: NBR
- Static: NBR
Shaft end: 1.4005 (AISI 416)

Constructie

Sewage pump with vortex impeller and vertical threaded connection. Pump housing and impeller made of composite material. 1~ motor with integrated operating capacitor, self-switching thermal motor monitoring, and basic sealing with a rotary shaft seal. Motor housing made of steel. Connection cable with float switch and fitted plug (depending on product type):

Type E (CEE 7/5) or type F (CEE 7/3)
Type I
Type B
Type M

Leveringsomvang

Pump
Fitted elbow with a threaded connection R 1½
Installation and operating instructions

Inbouw- en bedieningsvoorschriften