EMUport CORE 20.2-28A

Data sheet

Hydraulic data
  • Maximum operating pressure PN
    6 bar
  • Min. fluid temperature Tmin
    3 °C
  • Max. fluid temperature Tmax
    40 °C
  • Min. ambient temperature Tmin
    3 °C
  • Max. ambient temperature Tmax
    40 °C
Motor data
  • Mains connection
    3~400 V, 50 Hz
  • Rated current IN
    7.30 A
  • Rated speed
    3
  • Rated speed n
    2868 rpm
  • No. of poles
    2
  • Activation type
    Direct online (DOL)
  • Max. switching frequency t
    30 1/h
  • Insulation class
    H
  • Protection class
    IP68
Materials
  • Pump housing
    EN-GJL-250
  • Impeller
    EN-GJL-250
  • Motor housing
    EN-GJL-250
Installation dimensions
  • Operating mode (non-immersed)
    S3-50%
  • Pipe connection on the suction side RPS
    -
  • Pipe connection on the pressure side RPD
    DN 80
Information for order placements
  • Brand
    Wilo
  • Product description
    EMUport CORE 20.2-28A
  • EAN number
    4048482623993
  • Article number
    6078611
  • Net weight, approx. m
    450
  • Gross weight, approx. m
    450.0
  • Length with packaging
    59.05512 in
  • Height with packaging
    61.02362 in
  • Width with packaging
    59.05512 in
  • Packaging property
    Outer packaging
  • Packaging type
    Europallet
  • Minimum order quantity
    1

Tender text

Fully submersible sewage lifting unit ready for connection with solids separation system in accordance with DIN EN 12050-1. With the solids separation system version, coarse solids are separated before the pumps and do not come into contact with them, thereby maximizing operational reliability. All-in-one gas-tight and watertight collection reservoir without constructive welded joints, as well as two separately-lockable and externally maintainable solids separation reservoirs. Individual shut-off makes it possible to carry out maintenance work during operation. Pumping is performed by two high-performance submersible sewage pumps in dry well installation that run in alternating operation. The dry well installation of the pumps and their configuration as a redundant double-pump system ensures maximum hygiene, ease of maintenance, and operational reliability. The collection reservoir has rounded edges, the tank bottom is bevelled, the deepest point is located directly below the pump. This prevents deposits and the drying of solids at critical points. Quick connector to the pumps and the inspection opening facilitate maintenance work. Separate blocking of the solids separation reservoir facilitate maintenance while the unit is in operation. The level is recorded by a level probe.

Scope of delivery

  • Submersible pump solids separation system with two dry well installation submersible pumps
  • 2x gate valve for solids separation reservoir
  • 2x non-return valve on the pressure side in rectangular design
  • 2x gate valve on the pressure side
  • Consolidation of the pressure outlet line
  • 1x level probe
  • 1x floor fixation as cross beam
  • 2.5 m aeration and venting hose
  • 1x maintenance set with blind flange

Recommended accessories

  • Wilo-Control SC-L-…-FTS switchgear
  • Inlet slide valve
Operating data
  • Fluid media
    Water
Approved field of application
  • Maximum operating pressure PN
    6 bar
Product data
  • Gross volume of the tank V
    440.0 l
  • Switching volume V
    295.0 l
  • Operating mode (non-immersed)
    S3-50%
  • Height H
    1400 mm
  • Length L
    1390 mm
  • Width W
    1410 mm
Motor data
  • Mains connection
    3~400 V, 50 Hz
  • Voltage tolerance
    ±10 %
  • Rated power P2
    3.65 kW
  • Rated speed n
    2868 rpm
  • Rated current IN
    7.30 A
  • Insulation class
    H
  • Protection class motor
    IP68
  • Activation type
    Direct online (DOL)
  • Max. switching frequency t
    30 1/h
  • Motor protection
    WSK
Cable
  • Mains plug
    no
Materials
  • Tank material
    PE
  • Pump housing
    EN-GJL-250
  • Impeller
    EN-GJL-250
  • Motor housing
    EN-GJL-250
Installation dimensions
  • Pipe connection on the suction side
    DN 200
  • Pipe connection on the pressure side
    Ø 90
  • Connection venting
    Ø 75
Information for order placements
  • Brand
    Wilo
  • Product description
    EMUport CORE 20.2-28A
  • Net weight, approx. m
    450 kg
  • Article number
    6078611

Ordering information

Information for order placements
  • Brand
    Wilo
  • Product description
    EMUport CORE 20.2-28A
  • EAN number
    4048482623993
  • Article number
    6078611
  • Gross weight, approx. m
    450.0 kg
  • Net weight, approx. m
    450 kg
  • Overall length L
    1390.0 mm
  • Height without packaging H
    1400 mm
  • Colour
    green/black
  • Packaging property
    Outer packaging
  • Packaging type
    Europallet
  • Width without packaging L
    1410.0 mm
  • Minimum order quantity
    1

Downloads

REACH regulation

Edition 2018-10
Page format 209.9 x 296.7 mm
Number of pages 4

PDF (581 kB)

Download

PDF: EMUport CORE 20.2-28A

Configure

Page selection

Format selection

Optional information

You can enter any personal information that you want to be displayed in the header.

Download