Wilo-Padus PRO | Wilo

Wilo-Padus PRO

The portable submersible pump for reliable and long-term drainage of excavations.

Your advantages
Wilo-Padus PRO

The portable submersible pump for reliable and long-term drainage of excavations.

The Wilo-Padus PRO is the ideal submersible drainage pump for the drainage of excavations. Thanks to its robust construction, the wear-resistant material combinations and passive cooling in slurping operation, the submersible drainage pump with IE3 motor and integrated protection function is especially suitable for continuous duty in abrasive fluids. It can be used flexibly thanks to its low weight and flexible pressure connection. Quick access to the most important components also simplifies commissioning and maintenance. The Wilo-Padus PRO also fulfils all digitalisation requirements for the optimal planning of future maintenance work.

Your advantages

  • High reliability in abrasive fluids thanks to rubber-coated hydraulics and an impeller made of Duplex chrome steel
  • Easy installation thanks to low weight and flexible pressure connection (vertical/horizontal)
  • Active cooling for reliable continuous operation
  • Continuous duty in slurping operation thanks to passive cooling
  • Easy maintenance thanks to quick access to wearing parts
  • Equipped with energy-efficient IE3 motor technology as standard
  • Highest operational reliability thanks to integrated protection function

Wilo-Padus PRO_Feature_1_EN
Wilo-Padus PRO_Feature_2_EN
Wilo-Padus PRO_Feature_3_EN

“The Wilo-Padus PRO is ideally suited for the drainage of excavations”

Our efficient solution for reliable excavation draninage.

Submersible drainage pumps are subject to enormous loads caused by abrasive media when draining excavations. As a result, pump performance constantly decreases, and energy consumption increases. In the worst case, the water is no longer completely drained. This can result in delays or even stop the construction works.

The high-performance Wilo-Padus PRO, equipped with an IE3 motor, is specially designed for the high demands of excavations. Operation is very energy efficient and provides a high level of reliability thanks to its robust design with rubber-coated hydraulics and impeller finished with hardened chrome steel. The active cooling system enables reliable continuous duty, even in slurping operation.

Easy maintenance

When working on excavations, sand and small stones in particular causes wear to the impellers and hydraulic parts of submersible pumps, which means that during continuous operation their performance constantly decreases.

With its robust construction, the Wilo-Padus PRO is specially designed for such demands. Moreover, it offers quick access to wear parts for maintenance. The design has been conceived so that the gap between impeller and baseplate can be readjusted, meaning that the effectiveness of the pump can be increased again intermediately.

Minimal operating costs

In combination with our WiloCare service, Wilo-Padus PRO offers the highest possible level of cost security and operational reliability for economical and reliable continuous duty. WiloCare allows you to read out and analyse the pump’s operating status via a module, which therefore ensures operational reliability. The service can be adapted to meet a customer’s individual requirements with the Basic, Comfort and Premium packages. Our customers can rely on convenient services:

  • The condition of the pumps is monitored continuously
  • Reliable operation and cost security
  • Troubleshooting and operation optimisation

You are spared time-consuming on-site inspections and tying up your personnel with checking the status of the pumps. It allows you to plan and optimise maintenance cycles for the pump in a targeted manner whilst profiting from an extended service life and sustainably efficient operation.

Logo, Pictogramm
Series description
Wilo-Padus PRO


Submersible drainage pump


Pumping of

  • Wastewater
  • Process water


  • IE3 motor
  • A version with float switch and motor protection plug
  • Sheath current cooling



Wilo-Padus PRO M08L/T039-540/A


Submersible drainage pump


Series for construction site use


Open multi-channel impeller


Nominal diameter of the pressure connection: G3


Low-pressure version


Mains connection version:

M = 1~

T = 3~


Value/10 = motor power P2 in kW


Frequency (5 = 50 Hz, 6 = 60 Hz)


Rated voltage code


Additional electrical equipment:

No supplement = With bare cable end

P = with plug

A = with float switch and motor protection plug

Technical data

  • Mains connection: 3~400 V, 50 Hz
  • Protection class: IP68
  • Max. immersion depth: 20 m
  • Fluid temperature: 3 … 40 °C
  • Cable length: 23 m
  • Pressure port: Size B Storz coupling


  • Motor housing: EN-AC-AlSi10Mg
  • Cooling shroud: 1.4404
  • Pump housing: EN-AC-AlSi10Mg + NBR-70
  • Impeller: 1.4470
  • Suction strainer: 1.4404
  • Shaft: 1.4404
  • Seal:
    • On motor side: SiC/SiC
    • Fluid side: SiC/SiC
  • Static gaskets: NBR


Submersible drainage pump as submersible monobloc unit for portable wet well installation.


The outlet on the pressure side is designed as vertical threaded connection with Storz coupling. If necessary, the outlet on the pressure side can be aligned horizontally. Semi-open, multi-channel impellers are used in the process. The inlet has been equipped with a suction strainer. Consequently, coarse elements in the fluid are filtered upstream of the suction port.


AC and three-phase current version IE3 motors are used in the process. Motors feature thermal motor monitoring. The motor is cooled by the sheath flow cooling. Continuous duty is possible when immersed/non-immersed, also in slurping operation.

A sealing chamber protects the motor from fluid ingress. The filling fluid used is potentially biodegradable and environmentally safe.

The connection cable is permanently connected and the cable is 23 m long:

  • O-version: Cable with bare ends
  • A-version: Cable with float switch and plug
  • P-version: Cable with plug


The sealing on the fluid side and on the motor side is performed by two bidirectional mechanical seals.

Delivery state

  • Pump with bare cable end
  • Pump with float switch and motor protection plug (A version)
  • Pressure port with Storz pipe coupling
  • Installation and operating instructions

Installation and operating instructions

Wilo-Padus PRO

Article Number 6084247
Edition 2019-10
Page format 209.9 x 297.0 mm
Number of pages 32
PDF (2 MB)

General overview (Documents)

General overview 2019 International version

Article Number 2200591
Edition 2018
Page format 209.9 x 297.0 mm
Number of pages 74
PDF (40 MB)

General overview 2021 International version

Article Number
Edition 2020
Page format 209.9 x 297.0 mm
Number of pages 74
PDF (10 MB)

Certification booklet

Wilo-Padus PRO

Article Number 6053756
Edition 2020-06
Page format 209.9 x 297.0 mm
Number of pages 12
PDF (2 MB)

Brochure (Documents)

Wilo-Padus PRO - Reliable drainage of excavations

Article Number
Page format 209.9 x 297.0 mm
Number of pages 6
PDF (839 KB)

Certificate REACH (Documents)

REACH regulation

Edition 2020-08
Page format 209.9 x 297.0 mm
Number of pages 2
PDF (158 KB)
Product list
Number of results: 26
Product descriptionPipe connection on the pressure side DNdRated power P2Connection cable lengthMains connectionArticle number