Wilo-Initial Drain | Wilo

Wilo-Initial Drain

Wilo-Initial Drain

Avantajele dumneavoastră

Instalare simplă în cămine înguste datorită concepției compacte și greutății reduse
Siguranță în exploatare datorită sistemului automat de pornire/oprire al monitorizării motorului
Exploatare simplă datorită comutatorului cu plutitor cu contacte electrice montat

Lucrări de service recomandate

Tip constructiv

Submersible pump for fully automatic operation in portable wet well installation.

Lichide

For the pumping in domestic areas of wastewater with small amounts of sand and gravel.

Echipare/funcționare

Self-switching thermal motor monitoring
Integrated capacitor
Fitted float switch

Codul de identificare

Example	Wilo-Initial DRAIN 10-7/522/AEF-10M
Initial	Series
Drain	Wastewater pump
10	Nominal flow in m³/h
7	Nominal head in m
5	Mains frequency: 5 = 50 Hz 6 = 60 Hz
22	Rated voltage: 22 = 1~220 V 23 = 1~230 V
A	With float and plug
EF	Plug type: EF = CEE7/7 B = type B I = type I M = type M
10 M	Cable length

Date tehnice

Mains connection (depending on product type):
- 1~230 V, 50 Hz
- 1~220 V,50 Hz
- 1~220 V,60 Hz
Submerged operating mode: S1
Non-immersed operating mode: S3 25%
Protection class: IP68
Insulation class: F
Fluid temperature: 3 ... +40 °C (37 ... 104 °F)

Materiale

Hydraulics housing: PP
Impeller: PA6-GF30
Motor housing: 1.0038 (steel)
Seal:
- Pump/motor: NBR
- Static: NBR
Shaft end: 1.4005 (AISI 416)

Tip constructiv

Wastewater pump with vortex impeller and vertical threaded connection (hose connection enclosed). Pump housing and impeller made of composite material. 1~ motor with integrated operating capacitor, self-switching thermal motor monitoring, and basic sealing with a rotary shaft seal. Motor housing made of steel. Connection cable with float switch and fitted plug (depending on product type):

Type E (CEE 7/5) or type F (CEE 7/3)
Type I
Type B
Type M

Conținutul livrării

Pump
Hose connection Ø 24/32 mm, enclosed
Installation and operating instructions

Instrucțiuni de montaj și exploatare