Styr- och meddelandefunktioner

Kontakt

+46 470-72 76 00

Isbjörnsvägen 6
352 45 Växjö

Öppettider:

Mån-Tor: 07.00-16.30
Fre: 07.00-15.30

Vårt erbjudande till dig: Ett stort antal funktioner för styrning och anslutning

Även när det gäller anslutning till fastighetsautomation med kontakter och spännings/-strömgränssnitt har Wilo många funktioner att välja på: Wilo erbjuder förutom styrning via kommunikationsgränssnitt även styrning och signalering via klassiska flertrådsanslutningar. Anslutningarna för detta finns antingen på pumpen, en IF-modul eller en gränssnittsomvandlare.

Funktionsdetaljer

Control input analog (pressure or speed setpoint)

The analogue control input can deliver a setpoint specification in the chosen control mode or a speed specification for the drive, depending on the type of pump. The possible physical input value, as well as the control type, is given after the series. The transmission function is specific to the application.

For these series, a corresponding analog input 0...10 V or 4...20 mA is included in the standard equipment:

  • Stratos GIGA, IP-E/DP-E, IL-E/DL-E, BL-E
  • Helix Excel, Helix VE, MultiVert MVIE, Economy MHIE

Stratos/Stratos-D/Stratos-Z

For these series, the following IF modules with 0...10 V analog input are available:

  • Stratos SBM IF module (2030495)
  • IF module Ext. Off Stratos (2030475)
  • IF module Ext. Min (2030485)

Control input Overriding Off (Ext. Off)

For the following series, a corresponding input is included in the standard equipment:

  • VeroLine IP-E/DP-E series
  • VeroLine IL-E/DL-E series
  • Stratos GIGA series
  • Economy MHIE series
  • Multivert MVIE series
  • Multivert MVISE series
  • Helix VE series

For other series, the following IF modules or optional modules are available:

  • Stratos/Stratos-D/Stratos-Z: Stratos Ext. IF module Off, IF module Ext. Off/SBM

Download

Control input Overriding Min (Ext. Min)

For the following series, there are IF modules or optional modules available:

  • Stratos/Stratos-D/Stratos-Z: Stratos Ext. IF module Min

Download:

Collective fault signal (SSM)

For the following Series, a potential-free contact is included in the standard equipment:

  • Stratos MAXO series
  • Stratos Series
  • Stratos GIGA series
  • Helix EXCEL series
  • VeroLine IP-E/DP-E series
  • VeroLine IL-E/DL-E series
  • Economy MHIE series
  • Multivert MVIE series
  • Multivert MVISE series
  • Helix VE series

Collective run signal (SBM)

For the following series, a potential-free contact is included in the standard equipment:

  • VeroLine IP-E/DP-E series
  • VeroLine IL-E/DL-E series
  • Stratos GIGA series
  • Economy MHIE series
  • Multivert MVIE series
  • Multivert MVISE series
  • Helix VE series
  • Helix EXCEL series

For other series, the following IF modules or optional modules are available:

  • Stratos/Stratos-D/Stratos-Z: Stratos Ext. IF module Off/SBM, SBM IF module

Download