DrainLift SANI-S.11M/1
Article number: 2549900
Compact, ready for connection and fully submersible single pump lifting unit for pumping sewage containing faeces.
Gas- and watertight collection reservoir with collecting space that slopes at an angle and inspection opening with transparent cover. The inlets are freely configurable, level measurement is performed with an analogue output signal 4…20 mA. Pressure connection with attached non-return valve with inspection opening.
Drive via surface-cooled motor with thermal motor monitoring.
Pre-installed switchgear for automatic operation:
- Collective fault signal with potential-free contact
- Integrated and mains-independent alarm
- Adjustable follow-up time
- 1.5 m connection cable with attached plug
- Lifting unit with switchgear and connection cable with plug
- Flange connector DN 80/100
- Collar DN 100 for pressure connection
- Collar 50 mm for ventilation connection
- Collar DN 50 for evacuation connection
- Inlet set with hole saw 124 mmand gasket DN 100
- Fixation material
- Insulation mat
- 9 V rechargeable battery
- Operating and maintenance manual
| Approved field of application | |
|---|---|
| Fluid temperature T | 3 °C |
| Max. fluid temperature, for short periods up to 5 min T | 65 °C |
| Ambient temperature T | 3 °C |
| Maximum operating pressure PN | 1 bar |
| Max. permissible pressure in the pressure pipe P | 1.5 bar |
| Product data | |
|---|---|
| Gross volume of the tank V | 46 l |
| Useable volume at 180 mm inlet height V | 25 l |
| Useable volume at 250 mm inlet height V | 32 l |
| Sound-pressure level | 70 dB |
| Operating mode (non-immersed) | S3-10%, 60 s |
| Height H | 511 mm |
| Length L | 490 mm |
| Width W | 490 mm |
| Diagonal dimension Diagonal axis | 630 mm |
| Free ball passage of the hydraulics | 44 mm |
| Motor data | |
|---|---|
| Mains connection | 1~230 V, 50 Hz |
| Voltage tolerance | ±10 % |
| Rated power P2 | 0.75 kW |
| Rated speed n | 2829 1/min |
| Rated current IN | 5.4 A |
| Insulation class | F |
| Protection class motor | IP68 |
| Activation type | Direct On Line (DOL) |
| Max. switching frequency t | 60 1/h |
| Motor protection | Bimetall |
| Cable | |
|---|---|
| Connection cable length | 4 m |
| Cable type | H07RN-F |
| Cable cross-section | 3G1 mm² |
| Mains plug | CEE7/7 (Schuko) |
| Materials | |
|---|---|
| Tank | PE |
| Pump housing | PP-GF30 |
| Impeller | PP-GF30 |
| Shaft | Stainless steel |
| Gasket material | NBR |
| Motor housing | Stainless steel |
| Installation dimensions | |
|---|---|
| Pipe connection on the suction side | DN 100 |
| Pipe connection on the discharge side | DN 80 |
| Connection venting | Ø 50 |
| Ordering information | |
|---|---|
| Brand | Wilo |
| Product description | DrainLift SANI-S.11M/1 |
| Net weight, approx. m | 27 kg |
| Article number | 2549900 |
Installation and operating instructions
Wilo-DrainLift SANI-S
| Article Number | 2552852 |
| Edition | 2020-09 |
| Page format | 209.9 x 297.0 mm |
| Number of pages | 32 |
PDF (4 MB)Wilo-DrainLift SANI-S
| Article Number | 2553667 |
| Edition | 2020-09 |
| Page format | 209.9 x 297.0 mm |
| Number of pages | 56 |
PDF (4 MB)Wilo-Control MS-L
| Article Number | 2552612 |
| Edition | 2022-05 |
| Page format | 209.9 x 297.0 mm |
| Number of pages | 40 |
PDF (5 MB)Certification booklet
Wilo-DrainLift SANI
| Article Number | 6088777 |
| Edition | 2020-06 |
| Page format | 209.9 x 297.0 mm |
| Number of pages | 40 |
PDF (2 MB)Certificate REACH
REACH Regulation
| Edition | 2021-05 |
| Page format | 209.9 x 297.0 mm |
| Number of pages | 4 |
PDF (212 KB)