Wilo-DrainLift SANI-S

The smallest and lightest single pump lifting unit for detached and semi-detached homes.
The smallest and lightest single pump lifting unit for detached and semi-detached homes.
The compact Wilo-DrainLift SANI-S single faeces lifting unit is the smallest and lightest lifting unit according to EN 12050-1 (without macerator) and is therefore ideal for use in detached and semi-detached houses. Thanks to its large pump volume, the freely selectable inlets and the optional version for particularly aggressive fluids, the Wilo-DrainLift SANI-S can be used flexibly and is easy to install. Maintenance is made particularly easy by the user-friendly construction. Space-saving compact design and lowest-possible weight make installation and transport easy
Recommended services
Your advantages
- Very easy to install and transport due to space-saving compact construction and very light weight
- Operational reliability provided by the large switching volume, thermal motor protection and mains-independent alarm
- Corrosion-free design with engineering plastics and stainless steel guarantees high reliability
- Freely selectable connections for maximum installation flexibility
- Transparent reservoir cover and cleaning opening in the non-return valve ensure easy maintenance
Design
Compact, ready for connection and fully submersible single pump lifting unit for pumping sewage containing faeces.
Application
Pumping of sewage containing faeces:
- In cases where sewage cannot be led to the sewer system via a natural fall.
- For the backflow resistant drainage in cases where the discharge point is below the backflow level.
Equipment/function
- Switchgear with mains-independent alarm and collective fault signal
- Ready-to-plug
- Tank with inspection opening and transparent cover
- Analogue level measurement (4 … 20 mA)
- Non-return valve with inspection opening
- Thermal motor monitoring with bimetallic strip
Typekey
Example: | DrainLift SANI-S.11M/3C | |
DrainLift | Product family | |
SANI | Sewage lifting unit | |
S | Size | |
11 | Max. delivery head | |
M | Mains connection:
| |
3 | Version for motor and switchgear:
| |
C | Version for aggressive fluids |
Technical data
- Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
- Operating mode: S3 10%
- Fluid temperature: 3 ... 40 °C (37 ... 104 °F), max. 65 °C (149 °F) for 5 min
- Max. ambient temperature: 3 ... 40 °C (37 ... 104 °F)
- Vessel volume: 47 l (12.5 US.liq.gal.)
- Usable volume with regard to the positive suction head*: 25 l/6,5 US.liq.gal. (180 mm*)/32 l/8.5 US.liq.gal. (250 mm*)
- Pressure connection: DN 80, PN 10
- Inlet connection: DN 100/150
- Ventilation connection: 50 mm (2 in)
- Switchgear degree of protection: IP54
- Lifting unit degree of protection: IP68 (2 mWG/7 d)
Materials
- Motor housing: 1.4404 (AISI 316L)
- Hydraulics: PP-GF30
- Impeller: PP-GF30
- Reservoir: PE
- Non-return valve: PPS
Construction
Gas- and watertight collection reservoir with collecting space that slopes at an angle and inspection opening with transparent cover. The inlets are freely configurable, level measurement is performed with an analogue output signal 4 … 20 mA. Pressure connection with attached non-return valve with inspection opening.
Drive via surface-cooled motor with thermal motor monitoring.
Pre-installed switchgear for automatic operation:
Wilo-Control MS-L
- Collective fault signal with potential-free contact
- Integrated and mains-independent alarm
- Adjustable follow-up time
- 1.5 m connection cable with attached plug
Wilo-Control EC-L
- Operation via display and icon-based, alphanumeric menu
- Collective fault signal with potential-free contact
- Individual fault signal with potential-free contact
- ModBus interface
- Integrated and mains-independent alarm
- Adjustable follow-up time
- 1.5 m connection cable with attached plug
Scope of delivery
- Lifting unit with switchgear and connection cable with plug
- Flange connector DN 80/100
- Collar DN 100 for pressure connection
- HT double socket 50 mm (2 in) for ventilation connection
- HT double socket DN 50 for evacuation connection
- Inlet set with hole saw 124 mm (5 in) and gasket DN 100
- Floor fixation
- Insulation mat
- 9 V rechargeable battery
- Installation and operating instructions
Installation and operating instructions
General overview
Certification booklet
Product description | Operating mode (non-immersed) | Mains plug | Mains connection | Article number | |
---|---|---|---|---|---|
DrainLift SANI-S.11M/1 | S3-10%, 60 s | CEE7/7 (Schuko) | 1~230 V, 50 Hz | 2549900 | |
DrainLift SANI-S.11M/3C | S3-10%, 60 s | CEE7/7 (Schuko) | 1~230 V, 50 Hz | 2549917 | |
DrainLift SANI-S.11T/1 | S3-10%, 60 s | CEE 16A, 3P+N+PE, 6h | 3~400 V, 50 Hz | 2549901 | |
DrainLift SANI-S.11T/3C | S3-10%, 60 s | CEE 16A, 3P+N+PE, 6h | 3~400 V, 50 Hz | 2549918 |