Catalogue creation
My favorites
Product comparison
CronoTwin-DL 40/140-2,2/2-S1 | Wilo
Similar to figure

CronoTwin-DL 40/140-2,2/2-S1

Article number: 2171426
Technical data
Tender text
Operating Data
Min. fluid temperature Tmin -20 °C
Max. fluid temperature Tmax 140 °C
Min. ambient temperature Tmin -15 °C
Max. ambient temperature Tmax 40 °C
Maximum operating pressure PN 16 bar
Note on dimensioning 16 bar to 120 °C, 13 bar to 140 °C
Minimum efficiency index (MEI) ≥0.4
Motor data
Motor efficiency class IE3
Mains connection 3~400 V, 50 Hz
Voltage tolerance ±10 %
Rated power P2 2200 W
Rated speed n 2900 1/min
Rated current IN 4.5 A
Power factor cos φ 0.81
Motor efficiency ηM 50% 84.3 %
Motor efficiency ηM 75% 85.5 %
Motor efficiency ηM 100% 85.9 %
Insulation class F
Protection class IP55
Pump housing Grey cast iron
Impeller Bronze
Shaft Stainless steel
Shaft seal Q1Q1X4GG
Lantern Grey cast iron
Installation dimensions
Pipe connection on the suction side DNs DN 40
Pipe connection on the discharge side DNd DN 40
Ordering information
Brand Wilo
Product description CronoTwin-DL 40/140-2,2/2-S1
Net weight, approx. m 113 kg
Article number 2171426

In-line twin-head pump with two single-stage glanded centrifugal pumps in the same housing with switchover valve, for pipe installation or installation on a base. Housing blind flange and mounting brackets available at additional charge. Low-vibration and low-noise monobloc design with lantern and rigidly connected standard flange motor (standard motor). With forced-flow circulation, bidirectional bellows mechanical seal and cavitation-reducing impeller. Flanges with pressure measuring connections R 1/8. The pump housing and lantern are cataphoretic-coated.

Motors in IE3 technology as standard. Pump with motor ≥ 5.5 kW are equipped as standard with a PTC thermistor sensor for motor protection.

The motor terminal box ≤ 7.5 kW can be made of metal or plastic. If a metal terminal box is absolutely necessary, please order the appropriate special variant. The motor terminal boxes > 7.5 kW are always made of metal.


Installation and operating instructions

Wilo-Wilo-CronoLine-IL Wilo-CronoTwin-DL Wilo-CronoBloc-BL

Article Number 2202024
Edition 2018-07
Page format 209.9 x 297.0 mm
Number of pages 128
PDF (12 MB)

Certificate REACH

REACH Regulation

Edition 2021-05
Page format 209.9 x 297.0 mm
Number of pages 4
PDF (262 KB)

Acustic Spectrum (Octave band)

CronoTwin-DL 40/140-2,2/2

Page format 209.9 x 297.0 mm
Number of pages 1
PDF (164 KB)


With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.

Read more

Recommended services

Commissioning Glanded pumps

High performance is our strength.

Entrust the Wilo commissioning-service with ensuring a smooth process when implementing new systems in your installations. We will happily accompany you throughout the commissioning process of our products and support you step-by-step. You will benefit directly from the advantages of our products and their performance in operation. Our qualified service technicians will familiarise you with all strengths to guarantee a safe and optimal start.

Why you should take advantage of our commissioning expertise:

The pump is part of a complex supply system, that is why the focus of professional installers during commissioning is primarily on the higher-level system technology. However, the optimal pump settings – as a part of the overall system – are crucial for energy consumption and therefore for the efficiency and operational reliability of the entire system.

The advantage of using professional installers is that they hand over a system to the customer which is energy efficient from the start and they do not have to acquire detailed knowledge of each control and pump series for this. This significantly reduces both energy costs and pump wear. The commissioning service provided by the Wilo service also includes instruction of the responsible building service engineer.