Similar to figure
Stratos MAXO-D 32/0,5-12 PN 16
Article number: 2186292
Hydraulic data | |
---|---|
Energy efficiency index (EEI) | ≤0.19 |
Maximum operating pressure PN | 16 bar |
Head max H max | 0.0 m |
Flow max hr Q max hr | 15.0 m³/h |
Flow max add Q max add | 23.0 m³/h |
Minimum suction head at 50 °C m | 3 m |
Minimum suction head at 95 °C m | 10 m |
Minimum suction head at 110 °C | 16 m |
Min. fluid temperature Tmin | -10 °C |
Max. fluid temperature Tmax | 110 °C |
Min. ambient temperature Tmin | -10 °C |
Max. ambient temperature Tmax | 40 °C |
Motor data | |
---|---|
Mains connection | 1~230 V ±10%, 50/60 Hz |
Min current Imin | 0.11 A |
Max current Imax | 1.42 A |
Min. speed nmin | 750 1/min |
Max. speed nmax | 4400 1/min |
Power consumption P1 min | 7 W |
Power consumption P1 max | 320 W |
Emitted interference | EN 61800-3;2004+A1;2012 /residential area (C1) |
Interference resistance | EN 61800-3;2004+A1;2012 /industrial environment (C2) |
Insulation class | F |
Protection class | IPX4D |
Threaded cable connection | 5 x M16x1.5 |
Materials | |
---|---|
Pump housing | Grey cast iron |
Impeller | PPS-GF40 |
Shaft | 1.4122, DLC-coated |
Bearing | Carbon, antimony-impregnated |
Installation dimensions | |
---|---|
Pipe connection on the discharge side DNd | DN 32 |
Pipe connection on the suction side DNs | DN 32 |
Port-to-port length L0 | 220 mm |
Function | |
---|---|
Control mode |
|
Special features of the series |
|
Multi pump operation |
|
Measurement value logging | Heat and cooling capacity measurement |
Display |
|
Display (can also be selected) |
|
Pump venting function | Yes |
Equipment | |
---|---|
Approvals and labels |
|
Cold water insulation shell | No |
Display | Graphic colour display (4.3 inches) |
Display information | Comfort Version: LCD display (large) for showing the head, flow volume, actual und cumulated current. |
Pump control | Electronic-controlled pump (high efficiency pump) |
Quick electrical connection | Wilo Connector |
Thermal insulation shell | No |
Blocking-current proof motor | yes |
Particle filter | yes |
Key lock | yes |
Connectivity | |
---|---|
Access via the Wilo-Assistant app | Yes |
Analogue signal as standard |
|
Bus communication via additional accessories |
|
Connection for Wilo-Smart Cloud | Via Wilo-Smart Gateway |
Digital input |
|
Digital output |
|
wire data exchange and remote operation | Bluetooth |
Stratos MAXO-D 32/0,5-12 PN 16
Standard: 1~ 230 V, 50/60 Hz, Option: 3~ 230 V, 50/60 Hz
SSM: Collective fault signal (NC contact in accordance with VDI 3814, load capacity 1 A, 250 V ~)
Product data | |
---|---|
Brand | Wilo |
Product description | Stratos MAXO-D 32/0,5-12 PN 16 |
Article number | 2186292 |
EAN number | 4048482798165 |
Colour | Green/black/silver |
Minimum order quantity | 1 |
Date of sales availability | 2018-11-01 |
Previous model article number | 2083606 |
Previous model designation | Stratos-D 32/1-12 PN16 |
Packaging | |
---|---|
Packaging type | Cardboard box |
Packaging property | Transport packaging |
Pieces per pallet | 4 |
Number per layer | 2 |
Dimension, weight | |
---|---|
Length with packaging | 800 mm |
Length L | 220 mm |
Height with packaging | 394 mm |
Height H | 334 mm |
Width with packaging | 600 mm |
Width W | 400 mm |
Gross weight, approx. m | 25.5 kg |
Net weight, approx. m | 21 kg |
Premium smart-pump Wilo-Stratos MAXO-D
High-efficiency inline glandless twin-head pump with EC motor and electronic power adjustment. Can be used for cold water, heating water and water/glycol mixtures. Energy efficiency index (EEI) between ≤ 0.17 and ≤ 0.19 depending on pump type.
Control modes:
- Permanent, automatic performance adaptation to system requirements without setpoint specification Wilo Dynamic Adapt plus (factory setting). Up to 20% energy savings compared to dp-v control mode.
- Constant temperature (T-const.)
- Constant differential temperature (dT-const.)
- Needs-based volume flow optimisation of the feeder pump through connectivity and communication between multiple pumps (Multi-Flow Adaptation).
- Constant volume flow (Q-const.)
- Differential pressure control (dp-c) to a remote point in the pipe network (index circuit evaluator)
- Constant differential pressure (dp-c)
- Variable differential pressure (dp-v) with the option to set the nominal duty point
- Constant speed (n-const.)
- User-defined PID control
Functions:
- Heat quantity measurement
- Cooling quantity measurement
- Pump automatically deactivates when no flow is detected (No-Flow Stop)
- Switchover between heating and cooling mode (automatic, external or manual)
- Adjustable volume flow limiter using the Q-Limit function (Qmin. and Qmax.)
- Operating modes of twin-head pumps: Efficiency-optimised parallel operation for dp-c and dp-v, main and standby operation
- Ability to save and restore configured pump settings (3 restoration points)
- Fault and warning messages shown in plain text with advice on resolving the issue
- Pump venting function for automatic venting of the rotor chamber
- Automatic setback operation
- Automatic deblocking function and integrated full motor protection
- Dry-running detection
Display:
- Control mode
- Setpoint
- Volume flow
- Temperature
- Power consumption
- Electric consumption
- Active influences (e.g. STOP, No-Flow Stop)
Version:
- 2 configurable analogue inputs: 0–10 V, 2–10 V, 0–20 mA, 4–20 mA and commercially available PT1000; +24 V DC power supply
- 2 configurable digital inputs (Ext. OFF, Ext. Min, Ext. Max, heating/cooling, manual override (uncoupled from building automation), operation lock (key lock and remote operation configuration protection))
- 2 configurable signal relays for operational and fault messages
- Slot for Wilo-CIF modules with interfaces for building automation BA (optional accessories: CIF modules Modbus RTU, Modbus TCP, BACnet MS/TP, BACnet IP, LON, PLR, CANopen)
- Wilo Net as a Wilo system bus for communication between Wilo products, e.g. Multi-Flow Adaptation; double pump operation and Wilo-Smart Gateway
- Integrated temperature sensor
- Automatic emergency operation with definable pump speed for exceptional circumstances, e.g. bus communication or sensor value malfunction
- Graphic colour display (4.3 inches) with one-button manual operation
- Use the Wilo-Assistant app to read and set operating data and –among other things– set up a commissioning protocol through the Bluetooth interface (no further accessories required)
- Integrated double pump management (double pumps are prewired) when using 2 single pumps as double pump unit (connection via Wilo Net)
- Cable break detection when using an analogue signal (in connection with 2–10 V or 4–20 mA)
- Outdoor installation with weather protection possible in accordance with the installation and operating instructions
- Pre-set date and time
Scope of delivery
- Pump
- 2x optimised Wilo-Connector, suitable for all sizes
- 4x threaded cable gland, M16 x 1.5
- Washers for flange screws M12 and M16 (for nominal connection diameters DN 32 to DN 65)
- 2x gaskets for threaded connection
- Concise Installation and operating instructions
Optional accessories:
- CIF module: Modbus TCP, Modbus RTU, BACnet IP, BACnet MS/TP, LON, PLR, CANopen
- PT 1000 (B) pipe contact sensor (for domestic hot water)
- PT 1000 (AA) sensor for installation in immersion well
- Differential pressure sensor
- Smart Gateway
Operating Data | |
---|---|
Min. fluid temperature Tmin | -10 °C |
Max. fluid temperature Tmax | 110 °C |
Min. ambient temperature Tmin | -10 °C |
Max. ambient temperature Tmax | 40 °C |
Maximum operating pressure PN | 16 bar |
Minimum suction head at 50 °C m | 3 m |
Minimum suction head at 95 °C m | 10 m |
Minimum suction head at 110 °C | 16 m |
Motor data | |
---|---|
Energy efficiency index (EEI) | ≤0.19 |
Emitted interference | EN 61800-3;2004+A1;2012 /residential area (C1) |
Interference resistance | EN 61800-3;2004+A1;2012 /industrial environment (C2) |
Mains connection | 1~230 V, 50/60 Hz |
Power consumption P1 max | 320 W |
Min. speed nmin | 750 1/min |
Max. speed nmax | 4400 1/min |
Protection class motor | IPX4D |
Threaded cable connection | 5 x M16x1.5 |
Materials | |
---|---|
Pump housing | Grey cast iron |
Impeller | PPS-GF40 |
Shaft | 1.4122, DLC-coated |
Bearing | Carbon, antimony-impregnated |
Installation dimensions | |
---|---|
Pipe connection on the suction side DNs | DN 32 |
Pipe connection on the discharge side DNd | DN 32 |
Port-to-port length L0 | 220 mm |
Ordering information | |
---|---|
Brand | Wilo |
Product description | Stratos MAXO-D 32/0,5-12 PN 16 |
Net weight, approx. m | 21 kg |
Article number | 2186292 |
Installation and operating instructions
Certification booklet
Stratos MAXO, Stratos MAXO-D, Stratos MAXO-Z, Stratos , Stratos-D, Stratos-Z, Stratos-ZD, Yonos MAXO,Yonos MAXO-D, Yonos MAXO-Z, Yonos ECO BMS, Yonos PARA HF, Stratos PARA, Stratos PARA-Z, TOP-Z, TOP-S Transportsysteme
Article Number | 2209011 |
Edition | 2022-11 |
Page format | 209.9 x 297.0 mm |
Number of pages | 72 |