Contact

011 608 2780

Wilo-Padus UNI

The flexible drainage pump for a diverse range of fluids.

The Wilo-Padus UNI is the ideal entry-level model for wastewater transport in small commercial buildings. The pump can be used flexibly as a portable device or in a pump chamber. Hydraulics made from corrosion-free composite material provide high levels of reliability for universal use in the pumping of a diverse range of fluids. Installation is made very simple due to its low weight, integrated capacitor and threaded connection. A double mechanical seal and the large sealing chamber facilitate long maintenance intervals. Direct access to the most important components make maintenance work very convenient. By utilising Wilo-Control switchgears, the Wilo-Padus UNI can also be integrated into existing building management systems.

Your advantages

  • Exceptional reliability owing to corrosion-free hydraulics for universal applications and various fluids
  • Easy installation thanks to its low weight, integrated capacitor at the AC motor and threaded flange
  • Optimum efficiency and high operational reliability owing to improved hydraulics
  • Quick maintenance facilitated by direct access to the sealing chamber and pump housing
  • Long maintenance intervals thanks to double mechanical seal and large volume sealing chamber
  • Clog-proof thanks to the integrated strainer
Wilo-Padus UNI_Feature_2_EN
Wilo-Padus UNI_Feature_3_EN

Series description

Your advantages

  • Exceptional reliability owing to corrosion-free hydraulics for universal applications and various fluids
  • Easy installation thanks to its low weight, integrated capacitor at the AC motor and threaded flange
  • Optimum efficiency and high operational reliability owing to improved hydraulics
  • Quick maintenance facilitated by direct access to the sealing chamber and pump housing
  • Long maintenance intervals thanks to double mechanical seal and large volume sealing chamber
  • Clog-proof thanks to the integrated strainer

The flexible drainage pump for a diverse range of fluids.

The Wilo-Padus UNI is the ideal entry-level model for wastewater transport in small commercial buildings. The pump can be used flexibly as a portable device or in a pump chamber. Hydraulics made from corrosion-free composite material provide high levels of reliability for universal use in the pumping of a diverse range of fluids. Installation is made very simple due to its low weight, integrated capacitor and threaded connection. A double mechanical seal and the large sealing chamber facilitate long maintenance intervals. Direct access to the most important components make maintenance work very convenient. By utilising Wilo-Control switchgears, the Wilo-Padus UNI can also be integrated into existing building management systems.

Construction

Submersible drainage pump for intermittent operation for portable wet well installation

Application

Pumping of

  • Sewage not containing faeces (EN 12050-2)
  • Wastewater
  • Fluids with a pH value of > 4.5
  • Material version "B": Aggressive fluids, e.g. lake/sea water, condensate, distilled water

Equipment/function

  • Winding temperature monitoring with bimetallic strip
  • Ready-to-plug (versions A and P)
  • Float switch (version A)
  • Vertical float switch (version VA)

Scope of delivery

  • Submersible drainage pump with 10 m cable
  • Operating and maintenance manual

Type key

Example:

Wilo-Padus UNI M05B/T15-540/A

Padus

Submersible drainage pump with centrifugal hydraulics

UNI

Series with copolymer hydraulics

M

Open multi-channel impeller

05

Nominal diameter of the pressure connection: G2

B

Material version

  • None = standard version
  • B = V4A version

T

Mains connection version:

M = 1~

T = 3~

15

Value/10 = motor power P2 in kW

5

Frequency (5 = 50 Hz, 6 = 60 Hz)

40

Code for rated voltage

A

Additional electrical equipment:

No supplement = With bare cable end

P = with plug

A = with float switch and plug

VA = Vertical float switch and plug

Technical data

  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Non-immersed operating mode: S2-15 min; S3 10%
  • Pressure connection: G2
  • Protection class: IP68
  • Insulation class: F
  • Fluid temperature: 3 – 40 °C, max. 60 °C for 3 min
  • Free passage: 10 mm
  • Cable length: 10 m

Materials

  • Motor housing: 1.4301
  • Hydraulics housing: PP-GF30 (copolymer)
  • Impeller: PP-GF30 (copolymer)
  • Static gaskets: NBR
  • Sealing on pump side: SiC/SiC
  • Sealing on motor side: C/Cr
  • Shaft end: Stainless steel 1.4401

In material version "B", all parts that come in contact with the fluid are made of stainless steel 1.4401 (AISI 316).

Description/construction

Submersible drainage pump as submersible monobloc unit for portable wet well installation.

Hydraulics

The outlets on the pressure side are designed as vertical threaded flange connections. Open multi-channel impellers are used as the impeller shape. A strainer is integrated at the hydraulics housing.

Motor

The motors available are surface-cooled motors in single-phase version (with built-in operating capacitor) and three-phase version for the direct starting. The waste heat is given off directly to the surrounding fluid via the motor housing. These motors can operated immersed in continuous duty (S1) and non-immersed in short-time duty (S2) or intermittent periodic duty (S3).

Furthermore the motors are equipped with thermal motor monitoring. This protects the motor windings against overheating. For units with single-phase AC motors this is built-in and switches automatically. I.e. if the motor is switched off due to overheating and then cools down it is automatically switched on again. Bimetallic strips are used for this as standard.

The connection cable has a length of 10 m as standard and is available in following versions:

  • With bare cable ends
  • With plug
  • With float switch and plug

Pump with vertical float switch

The "VA" version is equipped with a vertical float switch. In this version, the switching level is preset by two floaters sitting on a threaded rod. It uses less space than conventional float switches and is perfect for use in tight manholes.

Seal

There is a sealing chamber between the motor and hydraulics. This is filled with medicinal white oil. The unit is sealed on the fluid and on the motor side by mechanical seals.

Duty chart

Wilo-Padus UNI

Downloads

REACH regulation

Edition 2018-10
Page format 209.9 x 296.7 mm
Number of pages 4

PDF (581 kB)

Download

General overview 2019 International version

Article Number 2200591
Edition 2018
Version number 1
Page format 209.9 x 297.0 mm
Number of pages 74

PDF (42 MB)

Download

Wilo-Padus UNI

Article Number 6084248
Edition 2019-02
Version number 02
Page format 209.9 x 297.0 mm
Number of pages 720

PDF (11 MB)

Download

Product

PDF: Wilo-Padus UNI

Configure

Page selection

Format selection

Optional information

You can enter any personal information that you want to be displayed in the header.

Download