Wilo-Padus UNI
The flexible drainage pump for a diverse range of fluids.
The flexible drainage pump for a diverse range of fluids.
The Wilo-Padus UNI is the ideal entry-level model for wastewater transport in small commercial buildings. The pump can be used flexibly as a portable device or in a pump chamber. Hydraulics made from corrosion-free composite material provide high levels of reliability for universal use in the pumping of a diverse range of fluids. Installation is made very simple due to its low weight, integrated capacitor and threaded connection. A double mechanical seal and the large sealing chamber facilitate long maintenance intervals. Direct access to the most important components make maintenance work very convenient. By utilising Wilo-Control switchgears, the Wilo-Padus UNI can also be integrated into existing building management systems.
Recommended services
Your advantages
- Exceptional reliability owing to corrosion-free hydraulics for universal applications and various fluids
- Low weight, integrated capacitor at the AC motor and threaded connection allows for easy installation
- Quick maintenance facilitated by direct access to the sealing chamber and pump housing
- Long maintenance intervals resulting from a double mechanical seal and large volume sealing chamber
- Clog-proof thanks to the integrated strainer
Design type
Submersible pump for stationary and portable wet installation in intermittent operation.
Liquid
For pumping in commercial areas of:
- Sewage without faeces
- Wastewater (with small amounts of sand and gravel)
- Wastewater, slightly acidic with a pH value > 4.5
- The submersible pumps Rexa UNI ... B/ and Rexa UNI ... K/ are additionally suitable for pumping:
- Lake- and seawater
NaCl content (common salt): max. 30 g/l (4 US.oz/US.fl.gal) up to 20 °C (68 °F) - Swimming pool water, max. chloride content: 400 mg/l (23 US.gr/US.fl.gal)
- Wastewater, slightly acidic with a pH value of > 3.5
- Lake- and seawater
Sewage pumping according to 12050
The pumps meet the requirements of EN 12050-2.
Equipment/function
- Thermal motor monitoring with bimetallic sensor
- Single-phase AC motor with self-switching thermal motor monitoring
- Single-phase AC motor with integrated condenser
- Different versions:
- Version “P”: with plug
- Version “A”: with float switch and plug
- Version “O”: bare cable ends
Typekey
Example: | Wilo-Padus UNI-M05B/T015-540/O |
Padus | Submersible drainage pump |
UNI | Series |
M | Open multi-channel impeller |
05 | Nominal diameter of discharge port |
B | Version:
|
T | Mains connection version:
|
015 | /10 = Rated power P in kW |
5 | Mains connection frequency: 5 = 50 Hz, 6 = 60 Hz |
40 | Key for rated voltage |
O | Additional electrical equipment:
|
Technical data
- Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
- Submerged operating mode: S1
- Non-immersed operating mode:
- Padus UNI ... A/ ...: S2-15 min; S3 10%
- Padus UNI ... B/ ...: S2-15 min; S3 10%
- Padus UNI ... K/ ...: S1
- IP rating: IP68
- Insulation class: F
- Fluid temperature: 3 … 40 °C (37 … 104 °F)
- Fluid temperature, max. 60 °C (140 °F) for 3 min
Materials
Wilo-Padus UNI-M ... A/ ...
- Hydraulics housing: PP-GF30
- Impeller: PP-GF30
- Motor housing: 1.4301 (AISI 304)
- Cooling shroud: −
- Shaft end: 1.4401 (AISI 316)
- Seal on the pump side: SiC/SiC
- Seal on the motor side: C/Cr
- Static seal: NBR (nitrile)
Wilo-Padus UNI-M ... B/ ...
- Hydraulics housing: PP-GF30
- Impeller: PP-GF30
- Motor housing: 1.4401 (AISI 316)
- Cooling shroud: −
- Shaft end: 1.4401 (AISI 316)
- Seal on the pump side: SiC/SiC
- Seal on the motor side: C/Cr
- Static seal: NBR (nitrile)
Wilo-Padus UNI-M ... K/ ...
- Hydraulics housing: PP-GF30
- Impeller: PP-GF30
- Motor housing: 1.4401 (AISI 316)
- Cooling jacket: 1.4401 (AISI 316)
- Shaft end: 1.4401 (AISI 316)
- Seal on the pump side: SiC/SiC
- Seal on the motor side: C/Cr
- Static seal: NBR (nitrile)
Construction
Padus UNI-M ... /M .../P
Submersible pump with open multi-channel impeller and vertical threaded connection. Hydraulics housing and impeller made of copolymer. Surface-cooled 1~ motor with integrated operating capacitor and self-switching thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing. Detachable connection cable with fitted plug (CEE7/7). The pump may be used in Zone 2 hazardous areas.
Padus UNI-M ... /M .../A and Padus UNI M ... B/M .../A
Submersible pump with open multi-channel impeller and vertical threaded connection. Hydraulics housing and impeller made of copolymer. Surface-cooled 1~ motor with integrated operating capacitor and self-switching thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing. Detachable connection cable with float switch and fitted plug (CEE7/7). The pump must not be used in hazardous areas.
Padus UNI-M ... /M .../VA
Submersible pump with open multi-channel impeller and vertical threaded connection. Hydraulics housing and impeller made of copolymer. Surface-cooled 1~ motor with integrated operating capacitor and self-switching thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing and mounted vertical float switch. Detachable connection cable with fitted plug (CEE7/7). The pump must not be used in hazardous areas.
Padus UNI-M ... K/M .../A
Submersible pump with open multi-channel impeller and vertical threaded connection. Hydraulics housing and impeller made of copolymer. Self-cooling 1~ motor (jacket cooling) with integrated operating capacitor and self-switching thermal motor monitoring. Oil-filled sealing chamber with double sealing. Motor housing and cooling jacket made of stainless steel. Detachable connection cable with float switch and fitted plug (CEE7/7). The pump must not be used in hazardous areas.
Padus UNI-M ... /T .../A
Submersible pump with open multi-channel impeller and vertical threaded connection. Hydraulics housing and impeller made of copolymer. Surface-cooled 3~ motor with thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing. Detachable connection cable with CEE plug (16A, 3P+N+PE, 6h). Float switch and thermal motor monitoring connected to the CEE plug. The pump must not be used in hazardous areas.
Padus UNI-M ... /T .../O and Padus UNI M ... B/T .../O
Submersible pump with open multi-channel impeller and vertical threaded connection. Hydraulics housing and impeller made of copolymer. Surface-cooled 3~ motor with thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing. Detachable connection cable with bare cable ends. The pump may be used in Zone 2 hazardous areas.
Padus UNI-M ... K/T .../O
Submersible pump with open multi-channel impeller and vertical threaded connection. Hydraulics housing and impeller made of copolymer. Self-cooling 3~ motor (jacket cooling) with thermal motor monitoring. Oil-filled sealing chamber with double sealing. Motor housing and cooling jacket made of stainless steel. Detachable connection cable with bare cable ends. The pump may be used in Zone 2 hazardous areas.
Scope of delivery
Padus UNI-M ...
- Pump
- Installation and operating instructions
Padus UNI-M ... KIT
- Pump
- Adapter set for 2½" pipe installation:
- Threaded flange 2" (male thread) to 2½" (female thread)
For screwing into the discharge port. Connection dimension discharge port: +46 mm. - Rubber grommet for 2½" pipe
Inside diameter: 75 mm, with 2× pipe clamps.
- Threaded flange 2" (male thread) to 2½" (female thread)
- Installation and operating instructions
Accessories
- Connection cable with fixed cable lengths:
- 1~ motor: up to max. 30 m (98 ft).
- 3~ motor: up to max. 50 m (164 ft).
- Suspension unit for wet installation
- Level control devices
- Fixation accessories and chains
- Switchgear, relays and plugs