TOP-Z 40/7 (3~400 V, PN 6/10, RG)
| Hydraulic data | |
|---|---|
| Maximum operating pressure PN | 10 bar |
| Delivery head for Qmin H Qmin | 5.9 m |
| Max. volume flow Qmax | 16.3 m³/h |
| Min. fluid temperature for HVAC applications Tmin | 0 °C |
| Max. fluid temperature for HVAC applications Tmax | 80 °C |
| Min. fluid temperature for drinking water applications Tmin | 0 |
| Max. fluid temperature for drinking water applications Tmax | 80 |
| Max. fluid temperature for drinking water applications in short-time duty (2 hours) Tmax | 110 °C |
| Min. ambient temperature Tmin | 0 °C |
| Max. ambient temperature Tmax | 40 °C |
| Max. permitted total water hardness | 3.57 mmol/l (20°dH) (3.21 mmol/l (18°dH) for 20/4 + 25/6) |
| Motor data | |
|---|---|
| Mains connection | 3~400 V, 50 Hz |
| Rated power P2 | 180 W |
| Rated current IN | 0.7 A |
| Max. speed nmax | 2700 1/min |
| Power consumption P1 min | 120 W |
| Power consumption P1 max | 320 W |
| Emitted interference | EN 61000-6-3 |
| Interference resistance | EN 61000-6-2 |
| Protection class motor | IPX4D |
| Insulation class | H |
| Threaded cable connection | 2 x PG13.5 |
| Motor protection | External protection WSK |
| Materials | |
|---|---|
| Pump housing | Bronze, CC499K |
| Impeller | PPE-GF30 |
| Shaft | Stainless steel |
| Bearing | Carbon, synthetic resin-impregnated |
| Installation dimensions | |
|---|---|
| Pipe connection on the suction side DNs | DN 40 |
| Pipe connection on the discharge side DNd | DN 40 |
| Port-to-port length L0 | 250 mm |
TOP-Z 40/7 (3~400 V, PN 6/10, RG)
Mains connection, 3~400 V, 50 Hz
3~230 V, 50 Hz (optional with switching plug 3~230 V)
WSK = thermal winding contact
Full motor protection at all speed stages with optional tripping unit
SK 602N/SK 622N or other switchgear/control devices with WSK connection option
Triggering: External tripping at switchgear/control device
Reset: Automatic fault acknowledgement after cooling off of the motor
Automatic
| Product data | |
|---|---|
| Brand | Wilo |
| Product description | TOP-Z 40/7 (3~400 V, PN 6/10, RG) |
| Article number | 2175516 |
| EAN number | 4048482742700 |
| Colour | green/bronze |
| Minimum order quantity | 1 |
| Date of sales availability | 2017-03-01 |
| Packaging | |
|---|---|
| Packaging type | Cardboard box |
| Packaging property | Transport packaging |
| Pieces per pallet | 45 |
| Number per layer | 9 |
| Dimension, weight | |
|---|---|
| Length with packaging | 350 mm |
| Length L | 250 mm |
| Height with packaging | 260 mm |
| Height H | 273 mm |
| Width with packaging | 225 mm |
| Width W | 204 mm |
| Gross weight, approx. m | 14.2 kg |
| Net weight, approx. m | 13 kg |
This circulator is suitable only for drinking water.
Can be used for domestic hot water circulation systems in the industry and building services.
Glandless circulator with screwed or flange connection, preselectable speed stages for power adjustment.
Equipment and function
- Manual power adjustment with 3 speed stages
- Pumps with 1~ motor:
- P2 up to 90 W: internal protection against unacceptably high winding temperatures
- P2 ≥ 180 W: Full motor protection with thermal winding contacts in conjunction with tripping unit (optional: SK 602N/SK 622N)
- Pumps with 3~ motor:
- P2 up to 90 W: internal protection against unacceptably high winding temperatures
- P2 ≥ 180 W: Full motor protection with thermal winding contacts in conjunction with tripping unit (optional: SK 602N/SK 622N)
- Mains connection 3~, 230 V with optional switching plug
- Pump housing in red brass or grey cast iron (stainless steel depending on type)
- PN 6/PN 10 combination flange (for DN 40 to DN 65)
- Thermal insulation shells
| Operating Data | |
|---|---|
| Max. fluid temperature Tmax | 80 °C |
| Min. fluid temperature Tmin | 0 °C |
| Min. ambient temperature Tmin | 0 °C |
| Max. ambient temperature Tmax | 40 °C |
| Temperature range at max. ambient temperature +40 °C T | -20...+110 |
| Maximum operating pressure PN | 10 bar |
| Max. permitted total water hardness | 3.57 mmol/l (20°dH) (3.21 mmol/l (18°dH) for 20/4 + 25/6) |
| Motor data | |
|---|---|
| Emitted interference | EN 61000-6-3 |
| Interference resistance | EN 61000-6-2 |
| Mains connection | 3~400 V, 50 Hz |
| Power consumption P1 max | 320 W |
| Max. speed nmax | 2700 1/min |
| Rated current IN | 0.7 A |
| Protection class motor | IPX4D |
| Threaded cable connection |
|
| Materials | |
|---|---|
| Pump housing | Bronze, CC499K |
| Impeller | PPE-GF30 |
| Shaft | Stainless steel |
| Bearing | Carbon, synthetic resin-impregnated |
| Installation dimensions | |
|---|---|
| Pipe connection on the suction side DNs | DN 40 |
| Pipe connection on the discharge side DNd | DN 40 |
| Port-to-port length L0 | 250 mm |
| Ordering information | |
|---|---|
| Brand | Wilo |
| Product description | TOP-Z 40/7 (3~400 V, PN 6/10, RG) |
| Net weight, approx. m | 13 kg |
| Article number | 2175516 |
Installation and operating instructions
Wilo-TOP-Z
| Article Number | 2202029 |
| Edition | 2023-11 |
| Number of pages | 220 |
| Language | ar, de, el, en, es, fr, it, nl, pt, tr |
PDF (4 MB)Group Statement
Group Statement REACH
| Edition | 2021-05 |
| Number of pages | 5 |
| Language | language neutral |
PDF (327 KB)Pipe installation (1) | ||
Two steel weld neck flanges in accordance with DIN-EN 1092-1 type 11 with a neck for welding to pipes as well as gaskets and screws/nuts for the flange connections. Depending on the configuration of the operating pressure of an installation, the appropriate counter flange must be selected for the operating pressure. Scope of delivery
| ||
Pipe installation, adapter fitting (1) | ||
The Wilo-F flange intermediate connecting pieces are used for compensation of the port-to-port length in case of a pump replacement. They are made of brass and are provided for length compensation of flange connections in domestic hot water circulation systems. The washers included in the scope of delivery must be used for pumps that have combination flanges. Scope of delivery
| ||
Pump control (1) | ||
Timer switchgear for wall fixation for the automatic, time-dependent activation/deactivation of Wilo single pumps with single-phase or three-phase motor. Switching function
Time switch Battery backup: 100 hours/rechargeable Ni-MH battery (button cell, type V80H). Clock precision: ±1 s per day Direct connection for single-phase current (1~) for pumps without thermal winding contacts (WSK). For pumps for three-phase current (3~) or single-phase current (1~) with WSK, only together with SK 602N/ SK 622N or contactor. Scope of delivery
| ||
Motor protection (2) | ||
Wall-mounted unit for electrical connection of single-phase and three-phase pumps with integrated thermal winding contacts (WSK) for monitoring the winding temperature (full motor protection). Automatic reactivation of pump after power failure and automatic fault acknowledgement after cooling off of the motor. Equipment/function
Scope of delivery
| ||
Wall-mounted unit for electrical connection of single-phase and three-phase pumps with integrated thermal winding contacts (WSK) for monitoring the winding temperature (full motor protection) and external run/fault signal. Automatic reactivation of pump after power failure and automatic fault acknowledgement after cooling off of the motor. Equipment/function
Scope of delivery
| ||
Plug (1) | ||
For uncontrolled TOP three-phase pumps (2 required for double pumps). For conversion in terminal boxes to existing mains voltage 3~230 V/50 Hz. Equipment/function The simple conversion for connecting the pump to 3~230 V is achieved by replacing the standard 400 V speed switching plug in the terminal box of the pump with the 230 V switching plug. No further wiring work is required. Manual variable speed switching with the plug is retained for 3 stages. Note This retrofitting does not permit the connection of the pump to 1~230 V. Not allowed in conjunction with Protect-Module C. Scope of delivery
| ||
With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.
Recommended services | |||
 Wilo-Live Assistant | Wilo-Live Assistant Service | 2216415 | |
The Wilo-Live Assistant is a technical advisor at your side during pump service. By using the Wilo-Live Assistant, our expert advisers can support you in the boiler or equipment room via video transmission – live and in real time. You use your smartphone to show the installation set-up, while the Wilo expert follows everything on their screen. They can see the components as well as other details and can thus determine where the fault or breakdown originates. We prevent downtime and ensure operational reliability of your pumps and systems! The Wilo-Live Assistant includes:
| |||
 System Optimisation | System Optimisation Glandless pumps | 2219250 | |
The Wilo Service offers proactive system optimisation by optimising settings and doing minor adjustments to ensure operational reliability. System Optimisation includes among others:
| |||
 Energy Solutions | Energy Solutions Glandless pumps | 2219285 | |
Wilo Service offers a proactive support to point out possible energy savings. Our service creates an overview of all installed assets to show how the energy consumption of pumps or systems can be reduced. We offer targeted consultancy and analysis, including the involvement of subsidies as well as comprehensive support around the changeover to high-efficiency technologies. Wilo-Energy solution includes:
| |||
More suitable services | |||
 Extended Warranty | Extended Warranty Glandless pumps | 2219589 | |
In combination of a new pump or system Wilo offers an extended warranty of up to five years in combination with commissioning and maintenance by the Wilo Service. Extended warranty includes:
| |||
 Supervision | Supervision Glandless pumps | 2219320 | |
Wilo supports during the concept phase to ensure quality work and cost efficiency. Our competent and qualified Wilo Service will support you with recommendations and technical advice throughout the entire project. Supervision includes:
| |||
 Installation | Installation Glandless pumps | 2219355 | |
The Wilo service offers installation of our pumps or pumping systems. We offer an end-to-end process from gathering information on site to installing our product in the overall plant. An optimal installation set-up and the interaction of various individual factors lay the foundation for long-term operational safety. Installation includes:
| |||
 Commissioning | Commissioning Glandless pumps | 2219390 | |
For perfect functioning of the pump(s) / system(s), it is recommended to have the commissioning carried out by the works' own WILO SE Customer Service Department. Optimum setting and efficient operation of the system are ensured as a result. Commissioning is comprised of the following points:
The price for commissioning only applies to system(s) which have been installed in accordance with the installation and operating instructions and state-of-the-art technology. No costs for any materials which may be required are included. | |||
 Maintenance | Maintenance BASIC Glandless pumps | 2219530 | |
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||
Maintenance COMFORT Glandless pumps | 2219416 | ||
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||
Maintenance PREMIUM Glandless pumps | 2219545 | ||
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||
 Repair | Repair Glandless pumps | 2219609 | |
Wilo Service draws on their competence and experience while consulting on site to decide whether the pump can actually be repaired on site or has to be sent in for a factory repair. Wilo also provides spare parts or a replacement pump to restore the operational reliability of the system. Repair includes:
| |||