The Wilo-Connect Modules are a practical solution for integrating the most recent Wilo-Stratos PICO generation into building automation – whether it be heating, air-conditioning or domestic hot water circulation. The compact modules only have to be plugged onto the pump and wired. The operating status of the pump can be relayed to the building management system at any time and the pump can be influenced by the automation level. Depending on the module, different interfaces are available for connection to the building automation system.

The BACnet Modbus Connect module supports either the two most common protocols Modbus RTU or BACnet MS/TP.

The BMS Connect module enables additional external setpoint specification via a 0-10 V signal to adapt the pump output to the current demand, as well as optional control of common functions, such as “External OFF”, “External MIN” or “External MAX”.

Both modules offer collective operation and collective fault signals so that the operational readiness of the pump can be monitored at all times by the building management system.

​