Wilo-Initial Drain
Особливості/переваги
- Простий монтаж у вузьких шахтах завдяки компактній конструкції та невеликій вазі
- Експлуатаційна безпека завдяки автоматичному контролю двигуна
- Проста робота завдяки вмонтованому поплавковому вимикачу
Рекомендовані сервісні послуги
Конструкція
Submersible pump for fully automatic operation in portable wet well installation.
Рідини
For the pumping in domestic areas of wastewater with small amounts of sand and gravel.
Спорядження/функціонування
- Self-switching thermal motor monitoring
- Integrated capacitor
- Fitted float switch
Типовий код
Example | Wilo-Initial DRAIN 10-7/522/AEF-10M |
Initial | Series |
Drain | Wastewater pump |
10 | Nominal flow in m³/h |
7 | Nominal head in m |
5 | Mains frequency:
|
22 | Rated voltage:
|
A | With float and plug |
EF | Plug type:
|
10 M | Cable length |
Технічні характеристики
- Mains connection (depending on product type):
- 1~230 V, 50 Hz
- 1~220 V,50 Hz
- 1~220 V,60 Hz
- Submerged operating mode: S1
- Non-immersed operating mode: S3 25%
- Protection class: IP68
- Insulation class: F
- Fluid temperature: 3 ... +40 °C (37 ... 104 °F)
Матеріали
- Hydraulics housing: PP
- Impeller: PA6-GF30
- Motor housing: 1.0038 (steel)
- Seal:
- Pump/motor: NBR
- Static: NBR
- Shaft end: 1.4005 (AISI 416)
Конструкція
Wastewater pump with vortex impeller and vertical threaded connection (hose connection enclosed). Pump housing and impeller made of composite material. 1~ motor with integrated operating capacitor, self-switching thermal motor monitoring, and basic sealing with a rotary shaft seal. Motor housing made of steel. Connection cable with float switch and fitted plug (depending on product type):
- Type E (CEE 7/5) or type F (CEE 7/3)
- Type I
- Type B
- Type M
Обсяг поставки
- Pump
- Hose connection Ø 24/32 mm, enclosed
- Installation and operating instructions
Інструкція з монтажу та експлуатації
Wilo-Initial Drain
Артикульний номер | 4168381 |
Видання | 2019-04 |
Кількість сторін | 80 |
Мова | el, en, es, fr, it, nl, pl, pt, ru, sv, tr, uk |
Позначення виробу | Напірний патрубок | Номінальна потужність двигуна P2 | Довжина під’єднувального кабелю | Під’єднання до мережі | Артикульний номер | |
---|---|---|---|---|---|---|
Initial DRAIN 10-7 | G 1½ | 0,37 кВт | 10 м | 1~230 V, 50 Hz | 4168021 | |
Initial DRAIN 13-9 | G 1½ | 0,5 кВт | 10 м | 1~230 V, 50 Hz | 4186548 |