GEP Fire-H
Future-oriented and safe fire protection.
Wilo-GEP Fire-H, Typ C324
Future-oriented and safe fire protection.
The Wilo-GEP Fire-H is a certified, modular and flexible solution with a small footprint that also meets the constantly increasing fire protection regulations. It guarantees the mandatory verifiable separation of drinking and extinguishing water at all times and thus meets the highest hygiene standards. The SC Fire switchgear with LCD display permanently monitors the main functions and transmits the system status to the building automation system. The commissioning and maintenance of the system are required by law in Germany. Therefore, Wilo not only offers the commissioning service through its factory customer service, but also expressly recommends it. The "all-round carefree service package" WiloCare also offers a bundling of maintenance and remote monitoring to ensure monitoring and optimisation of the system at all times.
Recommended services
Your advantages
- Space-saving compact unit for a minimum installation surface starting at 0.64 m²
- Hygienic safety via free drain type AB in accordance with DIN EN 1717
- Modular compact unit certified by DVGW, DEKRA and TÜV-Süd
- Automatic function test of all measurement and control devices to redundancy level 3 and automatic stagnant water flushing of the drinking water connecting cable
- Installation below the backflow level with redundant lifting unit and the output of operational and error messages via potential-free contacts possible
Design
Compact drinking water-sewage system for pressure boosting for hose outlet systems, as indirect connection with drinking water-full supply in accordance with DIN EN 1717, DIN 1988-600 and DIN EN 14462. With a variable number of vertical, multistage high-pressure centrifugal pumps, with or without run-down tanks as well as with or without full fairing.
Application
For fully automatic fire protection in residential and office buildings and in industrial plants and large estates.
Equipment/function
- On baseplate, hydraulically and electrically configured pump system
- Multistage centrifugal pumps of the Helix V, VE or MVI, MVIE series
- Pipework in stainless steel design
- Emergency overflow with siphon
- Integrated minimum flow rate control
- Industrial water connection using Victaulic roll grooving system, structure-borne noise insulation
- Pump control of the pressure boosting system depending on the pressure
- The separated sewage system completely automatic implements all measuring, switching and monitoring tasks. Display of all message texts such as function parameters or error messages via an external operating display
- Draining or emergency draining (DIN EN 12056) of the entire replenished drinking water volume flow
Typekey
NO VALUE |
Technical data
- ELT connection 400 V / 50 Hz
- Stainless steel run-down tank
- Installation surface – from 0.64 m2, can be extended in the raster 80 x 80 cm
- Free outlet in accordance with DIN EN 1717
- Configurable control for individual applications
- Configuration of the pump system in accordance with the specifications of the required overall hydraulic performance
Materials
- Impellers, diffusers, stage housing made of stainless steel 1.4307
- Pump housing of stainless steel 1.4301
- Shaft of stainless steel 1.4057
- 1.4404 shaft protection sleeve
- O-Ring gaskets made of EPDM (FKM gasket on request)
- Run-down tanks made of stainless steel
- Pipework made of stainless steel
Construction
- Baseplate: Hydraulically and electrically configured pump system, run-down tank, control, pneumatic valves, structure-borne noise insulation, measuring instruments, emergency spillway
- Pipework:Complete pipework made of stainless steel, suitable for the connection of all conventional piping materials; the pipework is designed according to the overall hydraulic performance of the pressure boosting system
- Pumps: Pumps of the Helix V, VE or MVI, MVIE series; all pump components in contact with fluid are made of stainless steel.For more information about the pump, please refer to the catalogue section “High-pressure multistage centrifugal pumps”
- Monitoring connection:Control connection for the function test of pumps and actuators.
- Stagnant water connection: Integrated stagnant water connection for replacing the volume of water of the drinking water connection pipe in accordance with DIN 1988-600.Flushing quantity depending on the time, conductor length/content.
- Pump control: Manual/Automatic switch per pump, standard soft starter for individual switching capacity over 4 kW.Requirements-dependent and pressure-dependent cut-in and deactivation of the integrated pump(s).
- Rotation connection ensuring consistent operating hour figures of all pumps of the drinking water-sewage system.
- Emergency operation pipe:Securing of the pump minimum volume flow in accordance with DIN 14462
- Operating and error messages:Functional check of the drinking water-replenishment valves and pumps, overflow indicator, dry-running protection, operating and error messages in plain text display
- Building management systems: Potential-free contact for external fault display
- Run-down tank: Specially developed run-down tanks made of stainless steel with free outlet in accordance with DIN EN 1717. Replenishment of high volume flows at low volume of water in the run-down tank.In the separator integrated with tank for reduction of gas input and reduction of the inflow speed.
- Drinking water replenishment:Replenishment from public mains in accordance with DIN EN 1717 with free outlet type AB
- Emergency drainage with overflow siphon:Upon cut in of the emergency spillway with integrated anti-syphon trap, drainage is performed in the underpressure system
Scope of delivery
- Drinking water sewage system delivered ready for connection, configured, checked for proper functioning and leakages
- Installation and operating instructions
- Wiring diagram
- Maintenance instructions
Options
- Baseplate: Hydraulically and electrically configured pump system, run-down tank, control, pneumatic valves, structure-borne noise insulation, measuring instruments, emergency spillway
- Pipework:Complete pipework made of stainless steel, suitable for the connection of all conventional piping materials; the pipework is designed according to the overall hydraulic performance of the pressure boosting system
- Pumps: Pumps of the Helix V, VE or MVI, MVIE series; all pump components in contact with fluid are made of stainless steel.For more information about the pump, please refer to the catalogue section “High-pressure multistage centrifugal pumps”
- Monitoring connection:Control connection for the function test of pumps and actuators.
- Stagnant water connection: Integrated stagnant water connection for replacing the volume of water of the drinking water connection pipe in accordance with DIN 1988-600.Flushing quantity depending on the time, conductor length/content.
- Pump control: Manual/Automatic switch per pump, standard soft starter for individual switching capacity over 4 kW.Requirements-dependent and pressure-dependent cut-in and deactivation of the integrated pump(s).
- Rotation connection ensuring consistent operating hour figures of all pumps of the drinking water-sewage system.
- Emergency operation pipe:Securing of the pump minimum volume flow in accordance with DIN 14462
- Operating and error messages:Functional check of the drinking water-replenishment valves and pumps, overflow indicator, dry-running protection, operating and error messages in plain text display
- Building management systems: Potential-free contact for external fault display
- Run-down tank: Specially developed run-down tanks made of stainless steel with free outlet in accordance with DIN EN 1717. Replenishment of high volume flows at low volume of water in the run-down tank.In the separator integrated with tank for reduction of gas input and reduction of the inflow speed.
- Drinking water replenishment:Replenishment from public mains in accordance with DIN EN 1717 with free outlet type AB
- Emergency drainage with overflow siphon:Upon cut in of the emergency spillway with integrated anti-syphon trap, drainage is performed in the underpressure system
Group Statement
Group Statement REACH
| Edition | 2021-05 |
| Number of pages | 5 |
| Language | language neutral |
PDF (279 KB)