Wilo-DrainLift MINI3

Compact lifting unit, ready for connection, for wash basin, shower, bathtub and WC drainage.

For installation in rooms or as a concealed-wall installation. To be connected to the following drainage fixtures:

DrainLift MINI3-XXS

• Wash basin
• Shower

DrainLift MINI3-XS

• Wash basin
• Shower
• Bathtub
• Dishwasher
• Washing machine

DrainLift MINI3-XS/WC

• Bathroom/toilet
• Wash basin
• Shower

DrainLift MINI3-XXS

For collection and pumping of the following in domestic areas:

• Sewage not containing faeces

Sewage pumping according to 12050

The sewage lifting unit meets the requirements of EN 12050-2.

DrainLift MINI3-XS

For collection and pumping of the following in domestic areas:

• Sewage not containing faeces

Sewage pumping according to 12050

The sewage lifting unit meets the requirements of EN 12050-2.

DrainLift MINI3-XS/WC

For collection and pumping of the following in domestic areas:

• Sewage containing faeces

Sewage pumping according to 12050

The sewage lifting unit meets the requirements of EN 12050-3.

• Ready-to-plug
• Level measurement via vertical float
• Vertical discharge port
• At most three inlets
• “WC” version with toilet connection
• Venting with active carbon filter
• “” (DrainLift MINI3-XS only)
• Depth suction

• Mains connection: 1~230 V, 50 Hz
• Operating mode: S3 15%
• Fluid temperature: 3 to 40 °C (37 to 104 °F), max. 75 °C (167 °F) for 5 minutes
• Ambient temperature max.: 3 to 40 °C (37 to 104 °F)
• Protection class: IP68 (3 mWG/48 h)

Wilo-DrainLift MINI3-XXS

Compact, fully submersible lifting unit with submersible pump, ready for connection. Level measurement performed by a vertical float switch. Venting is integrated in the cover and equipped with an active carbon filter.

Up to four connections are available:

• 1x 50 mm inlet (DN 40) without non-return valve, located on top, closed ex-works.
• 2x 50/63 mm inlet (DN 40/50) with non-return valve, located on left and right side, open ex-works.
• 1x 40 mm discharge port (DN 32) with non-return valve, located on right side, open ex-works.

Wilo-DrainLift MINI3-XS

Compact, fully submersible lifting unit with submersible pump, ready for connection. Level measurement performed by a vertical float switch. Venting is integrated in the cover and equipped with an active carbon filter.

Up to four connections are available:

• 1x 50 mm inlet (DN 40) without non-return valve, located on top, closed ex-works.
• 2x 50/63 mm inlet (DN 40/50) with non-return valve, located on left and right side, open ex-works.
• 1x 40/50 mm discharge port (DN 32/40) with non-return valve, located on top, open ex-works.

Wilo-DrainLift MINI3-XS/WC

Compact, fully submersible lifting unit with submersible pump, ready for connection. The submersible pump is equipped with a rotating blade. The blade reliably shreds faeces in sewage. Level measurement performed by a vertical float switch. Venting is integrated in the cover and equipped with an active carbon filter.

Up to five connections are available:

• 1x 50 mm inlet (DN 40) without non-return valve, located on top, closed ex-works.
• 2x 50/63 mm inlet (DN 40/50) with non-return valve, located on left and right side, open ex-works.
• 1x 110 mm toilet connection (DN 100), located in front, open ex-works. If necessary, the WC connection can also be located on the right side. The associated opening is closed ex-works.
• 1x 40/50 mm discharge port (DN 32/40) with non-return valve, located on top, open ex-works.

Discharge port

• DrainLift MINI3-XXS:
  • 1x 40 mm collar (DN 32)
  • 2x 32-50 mm hose clip
• DrainLift MINI3-XS:
  • 1x 40/50 mm collar (DN 32/40) for discharge outlet
  • 2x 32-50 mm hose clip

Toilet connection (WC version only)

• 1x 110 mm collar (DN 100)
• 1x clamp ring
• 1x 110-130 mm hose clip

Inlet connection

• 2x 63 mm inlet connection (DN 50)
• 2x 50/63 mm collar (DN 40/50)
• 2x non-return valve
• 4x 50-70 mm pipe clamp
• 2x 32-50 mm hose clip
• 2x sealing plug
• 4x O-ring

General

• Install floor fixation (buoyancy safeguards): 2x mounting brackets with screws and wall plugs
• Installation and operating instructions

• Ready-to-plug
• Level measurement via vertical float
• Vertical discharge port
• At most three inlets
• “WC” version with toilet connection
• Venting with active carbon filter
• “” (DrainLift MINI3-XS only)
• Depth suction

• Mains connection: 1~230 V, 50 Hz
• Operating mode: S3 15%
• Fluid temperature: 3 to 40 °C (37 to 104 °F), max. 75 °C (167 °F) for 5 minutes
• Ambient temperature max.: 3 to 40 °C (37 to 104 °F)
• Protection class: IP68 (3 mWG/48 h)

Wilo-DrainLift MINI3-XXS

Compact, fully submersible lifting unit with submersible pump, ready for connection. Level measurement performed by a vertical float switch. Venting is integrated in the cover and equipped with an active carbon filter.

Up to four connections are available:

• 1x 50 mm inlet (DN 40) without non-return valve, located on top, closed ex-works.
• 2x 50/63 mm inlet (DN 40/50) with non-return valve, located on left and right side, open ex-works.
• 1x 40 mm discharge port (DN 32) with non-return valve, located on right side, open ex-works.

Wilo-DrainLift MINI3-XS

Compact, fully submersible lifting unit with submersible pump, ready for connection. Level measurement performed by a vertical float switch. Venting is integrated in the cover and equipped with an active carbon filter.

Up to four connections are available:

• 1x 50 mm inlet (DN 40) without non-return valve, located on top, closed ex-works.
• 2x 50/63 mm inlet (DN 40/50) with non-return valve, located on left and right side, open ex-works.
• 1x 40/50 mm discharge port (DN 32/40) with non-return valve, located on top, open ex-works.

Wilo-DrainLift MINI3-XS/WC

Compact, fully submersible lifting unit with submersible pump, ready for connection. The submersible pump is equipped with a rotating blade. The blade reliably shreds faeces in sewage. Level measurement performed by a vertical float switch. Venting is integrated in the cover and equipped with an active carbon filter.

Up to five connections are available:

• 1x 50 mm inlet (DN 40) without non-return valve, located on top, closed ex-works.
• 2x 50/63 mm inlet (DN 40/50) with non-return valve, located on left and right side, open ex-works.
• 1x 110 mm toilet connection (DN 100), located in front, open ex-works. If necessary, the WC connection can also be located on the right side. The associated opening is closed ex-works.
• 1x 40/50 mm discharge port (DN 32/40) with non-return valve, located on top, open ex-works.

Discharge port

• DrainLift MINI3-XXS:
  • 1x 40 mm collar (DN 32)
  • 2x 32-50 mm hose clip
• DrainLift MINI3-XS:
  • 1x 40/50 mm collar (DN 32/40) for discharge outlet
  • 2x 32-50 mm hose clip

Toilet connection (WC version only)

• 1x 110 mm collar (DN 100)
• 1x clamp ring
• 1x 110-130 mm hose clip

Inlet connection

• 2x 63 mm inlet connection (DN 50)
• 2x 50/63 mm collar (DN 40/50)
• 2x non-return valve
• 4x 50-70 mm pipe clamp
• 2x 32-50 mm hose clip
• 2x sealing plug
• 4x O-ring

General

• Install floor fixation (buoyancy safeguards): 2x mounting brackets with screws and wall plugs
• Installation and operating instructions