Wilo-Rexa UNI
For the sewage disposal of small commercially used buildings.
For the sewage disposal of small commercially used buildings.
The Wilo-Rexa UNI is suitable as an entry level model for smaller commercial buildings for sewage disposal (according to EN 12050-1). For this purpose, the pump can be used in a wide variety of applications, whether portable or in the pump chamber as a Wilo system solution. The new vortex hydraulics with corrosion-resistant composite and a smooth surface provide high reliability and allow the pump to be used universally with various fluids. The low weight, the capacitor integrated in the single-phase AC motor and the fixings integrated in the flange provide easy installation. Direct access to the most important components makes maintenance very easy. Due to double seals and the large sealing chamber, maintenance intervals can be increased. Wilo-Rexa UNI can be controlled via Wilo-Control switchgears and integrated into existing building management systems. With the Wilo-Rexa UNI, Wilo again proves its innovative leadership and underscores its system expertise by integrating single pumps, pump chambers and controls into higher-level systems.
Recommended services
Your advantages
- Excellent reliability due to corrosion-free hydraulics for universal application and various fluids
- Is light weight, integrated capacitor at the single-phase AC motor and flange with integrated fixation provides easy installation
- Vortex hydraulics and smooth surfaces for optimum efficiency and operational reliability
- Quick maintenance facilitated by direct access to the sealing chamber and pump housing
- Long maintenance intervals are ensured by its double seal and a high volume sealing chamber
Product features
- Vortex hydraulics made of corrosion-free copolymer
Motor housing made of stainless steel (available in 2 qualities)
Single-phase AC motor with integrated condenser
Combination flange with integrated and captive fixation and flat gasket
Hydraulics housing with integrated pump support foot
Direct access to sealing chamber and hydraulics
Eco-friendly features
- Efficient design with special components for the lowest possible weight load
- Efficient design with special components for the lowest possible weight load
Design type
Submersible pump for stationary and portable wet installation in intermittent operation.
Liquid
For pumping in commercial areas of:
- Sewage containing faeces
- Wastewater (with small amounts of sand and gravel)
- Wastewater, slightly acidic with a pH value > 4.5
- The submersible pumps Rexa UNI ... B/ and Rexa UNI ... K/ are additionally suitable for pumping:
- Lake- and seawater
NaCl content (common salt): max. 30 g/l (4 US.oz/US.fl.gal) up to 20 °C (68 °F) - Swimming pool water, max. chloride content: 400 mg/l (23 US.gr/US.fl.gal)
- Wastewater, slightly acidic with a pH value of > 3.5
- Lake- and seawater
Sewage pumping according to 12050
The pumps meet the requirements of EN 12050-1.
Equipment/function
- Thermal motor monitoring with bimetallic sensor
- Single-phase AC motor with self-switching thermal motor monitoring
- Single-phase AC motor with integrated condenser
- Different versions:
- Version “P”: with plug
- Version “A”: with float switch and plug
- Version “O”: bare cable ends
Typekey
Example: | Wilo-Rexa UNI-V05B/21T006-540/O |
Rexa | Submersible sewage pump |
UNI | Series |
V | Vortex impeller |
05 | Nominal diameter of discharge port
|
B | Version:
|
2 | Number of poles |
1 | IE-efficiency class (derived from IEC 60034-30) |
T | Mains connection version:
|
006 | /10 = Rated power P in kW |
5 | Mains connection frequency: 5 = 50 Hz, 6 = 60 Hz |
40 | Key for rated voltage |
O | Additional electrical equipment:
|
Technical data
- Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
- Submerged operating mode: S1
- Non-immersed operating mode:
- Rexa UNI ... A/ ...: S2-15 min; S3 10%
- Rexa UNI ... B/ ...: S2-15 min; S3 10%
- Rexa UNI ... K/ ...: S1
- IP rating: IP68
- Insulation class: F
- Fluid temperature: 3 … 40 °C (37 … 104 °F)
- Fluid temperature, max. 60 °C (140 °F) for 3 min
Materials
Wilo-Rexa UNI-V05 ... A/ ...
- Hydraulics housing: PP-GF30
- Impeller: PP-GF30
- Motor housing: 1.4301 (AISI 304)
- Cooling shroud: −
- Shaft end: 1.4401 (AISI 316)
- Seal on the pump side: SiC/SiC
- Seal on the motor side: C/Cr
- Static seal: NBR (nitrile)
Wilo-Rexa UNI-V05 ... B/ ...
- Hydraulics housing: PP-GF30
- Impeller: PP-GF30
- Motor housing: 1.4401 (AISI 316)
- Cooling shroud: −
- Shaft end: 1.4401 (AISI 316)
- Seal on the pump side: SiC/SiC
- Seal on the motor side: C/Cr
- Static seal: NBR (nitrile)
Wilo-Rexa UNI-V06 ... A/ ...
- Hydraulics housing: PP-GF30
- Impeller: PP-GF30
- Motor housing: 1.4301 (AISI 304)
- Cooling shroud: −
- Shaft end: 1.4401 (AISI 316)
- Seal on the pump side: SiC/SiC
- Seal on the motor side: C/Cr
- Static seal: NBR (nitrile)
Wilo-Rexa UNI-V06 ... B/ ...
- Hydraulics housing: PP-GF30
- Impeller: PP-GF30
- Motor housing: 1.4401 (AISI 316)
- Cooling shroud: −
- Shaft end: 1.4401 (AISI 316)
- Seal on the pump side: SiC/SiC
- Seal on the motor side: C/Cr
- Static seal: NBR (nitrile)
Wilo-Rexa UNI-V06 ... K/ ...
- Hydraulics housing: PP-GF30
- Impeller: PP-GF30
- Motor housing: 1.4401 (AISI 316)
- Cooling jacket: 1.4401 (AISI 316)
- Shaft end: 1.4401 (AISI 316)
- Seal on the pump side: SiC/SiC
- Seal on the motor side: C/Cr
- Static seal: NBR (nitrile)
Construction
Rexa UNI-V ... A/M .../P
Submersible pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. Surface-cooled 1~ motor with integrated operating capacitor and self-switching thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing. Detachable connection cable with fitted plug (CEE7/7). The pump may be used in Zone 2 hazardous areas.
Rexa UNI-V ... A/M .../A and Rexa UNI V ... B/M .../A
Submersible pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. Surface-cooled 1~ motor with integrated operating capacitor and self-switching thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing. Detachable connection cable with float switch and fitted plug (CEE7/7). The pump must not be used in hazardous areas.
Rexa UNI-V ... K/M .../A
Submersible pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. Self-cooling 1~ motor (jacket cooling) with integrated operating capacitor and self-switching thermal motor monitoring. Oil-filled sealing chamber with double sealing. Motor housing and cooling jacket made of stainless steel. Detachable connection cable with float switch and fitted plug (CEE7/7). The pump must not be used in hazardous areas.
Rexa UNI-V ... A/T .../A
Submersible pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. Surface-cooled 3~ motor with thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing. Detachable connection cable with CEE plug (16A, 3P+N+PE, 6h). Float switch and thermal motor monitoring connected to the CEE plug. The pump must not be used in hazardous areas.
Rexa UNI-V ... A/T .../O and Rexa UNI V ... B/T .../O
Submersible pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. Surface-cooled 3~ motor with thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing. Detachable connection cable with bare cable ends. The pump may be used in Zone 2 hazardous areas.
Rexa UNI-V ... K/T .../O
Submersible pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. Self-cooling 3~ motor (jacket cooling) with thermal motor monitoring. Oil-filled sealing chamber with double sealing. Motor housing and cooling jacket made of stainless steel. Detachable connection cable with bare cable ends. The pump may be used in Zone 2 hazardous areas.
Scope of delivery
- Pump
- Installation and operating instructions
Accessories
- Connection cable with fixed cable lengths:
- 1~ motor: up to max. 30 m (98 ft).
- 3~ motor: up to max. 50 m (164 ft).
- Suspension unit for wet installation
- Level control devices
- Fixation accessories and chains
- Switchgear, relays and plugs
Installation and operating instructions
Wilo-Rexa UNI
| Article Number | 6082109 |
| Edition | 2019-02 |
| Number of pages | 32 |
| Language | en |
PDF (3 MB)Certification booklet
Wilo-Rexa UNI
| Article Number | 6082102 |
| Edition | 2022-08 |
| Number of pages | 16 |
| Language | language neutral |
PDF (7 MB)Group Statement
Group Statement REACH
| Edition | 2021-05 |
| Number of pages | 5 |
| Language | language neutral |
PDF (271 KB)Declaration of Performance
Wilo-Rexa UNI - Life Cycle Assessment Declaration (preliminary calculation)
| Edition | 2018-XX |
| Number of pages | 1 |
| Language | en |
PDF (567 KB)