Wilo-Initial Drain | Wilo

Wilo-Initial Drain

Wilo-Initial Drain

Ваши преимущества

Простая установка в узких шахтах благодаря компактной конструкции и малому весу
Надежность эксплуатации благодаря автоматически переключающимся контрольным устройствам электродвигателя
Простая эксплуатация благодаря установленному поплавковому выключателю

Тип

Submersible pump for fully automatic operation in portable wet well installation.

Жидкости

For the pumping in domestic areas of wastewater with small amounts of sand and gravel.

Оснащение/функция

Self-switching thermal motor monitoring
Integrated capacitor
Fitted float switch

Расшифровка наименования

Example	Wilo-Initial DRAIN 10-7/522/AEF-10M
Initial	Series
Drain	Wastewater pump
10	Nominal flow in m³/h
7	Nominal head in m
5	Mains frequency: 5 = 50 Hz 6 = 60 Hz
22	Rated voltage: 22 = 1~220 V 23 = 1~230 V
A	With float and plug
EF	Plug type: EF = CEE7/7 B = type B I = type I M = type M
10 M	Cable length

Технические характеристики

Mains connection (depending on product type):
- 1~230 V, 50 Hz
- 1~220 V,50 Hz
- 1~220 V,60 Hz
Submerged operating mode: S1
Non-immersed operating mode: S3 25%
Protection class: IP68
Insulation class: F
Fluid temperature: 3 ... +40 °C (37 ... 104 °F)

Материалы

Hydraulics housing: PP
Impeller: PA6-GF30
Motor housing: 1.0038 (steel)
Seal:
- Pump/motor: NBR
- Static: NBR
Shaft end: 1.4005 (AISI 416)

Тип

Wastewater pump with vortex impeller and vertical threaded connection (hose connection enclosed). Pump housing and impeller made of composite material. 1~ motor with integrated operating capacitor, self-switching thermal motor monitoring, and basic sealing with a rotary shaft seal. Motor housing made of steel. Connection cable with float switch and fitted plug (depending on product type):

Type E (CEE 7/5) or type F (CEE 7/3)
Type I
Type B
Type M

Комплект поставки

Pump
Hose connection Ø 24/32 mm, enclosed
Installation and operating instructions

Инструкция по монтажу и эксплуатации