Wilo-DrainLift MINI5
Convenient lifting unit with alarm contact for single-room drainage of sewage from toilets, showers, dishwashers and washing machines and condensate from condensing boilers below the backflow level.
Convenient lifting unit with alarm contact for single-room drainage of sewage from toilets, showers, dishwashers and washing machines and condensate from condensing boilers below the backflow level.
The Wilo-DrainLift MINI5 is a convenient lifting unit that safely disposes of domestic sewage. With its modern, aesthetically pleasing design and compact dimensions, it fits perfectly when there is no natural downward slope for drainage. With a discharge port of choice (horizontal or vertical DN 32/40), several DN 40/50 inlets and the option of a side or central toilet connection, the lifting unit is individually adaptable. Labour-intensive additional pipework for the discharge outlet is not required, making installation particularly convenient, especially when performing renovations and upgrades. To reduce the risk of clogging and ensure high operational reliability, the lifting unit is equipped with a sewage pump with a rotating blade.
Your advantages
- Plug-in lifting unit in compact design – suitable for concealed-wall installation
- Aesthetically pleasing housing design enables discreet integration into modern living environments
- With toilet connection: Non-clogging pump with rotating blade enables high operational reliability
- A range of connection options for more flexibility on installation, particularly when replacing older models with existing piping
- Integrated level control with depth suction
- Silent mode to reduce noise emissions in difficult pipe conditions
- Integrated potential-free contact for connection of an external alarm signal or Smart Home system as a high water alarm
- Innovative design for easy and hygienic access to pumps and level control
- Corrosion-resistant plastic for pumping condensate from heat generators and water softening systems
- Ultra-quiet operation for discreet drainage
Lifting unit Wilo-DrainLift MINI5-XS/WC for sewage containing faeces
- Vertical discharge port DN 32/40
- Horizontal discharge port DN 32/40
- Horizontal toilet connection DN 100
- Horizontal inlet DN 40/5
- Additional vertical inlet DN 40
Lifting unit Wilo-DrainLift MINI5-XS/WC for sewage containing faeces
- Vertical discharge port DN 32/40
- Horizontal discharge port DN 32/40
- Horizontal toilet connection DN 100
- Horizontal inlet DN 40/5
- Additional vertical inlet DN 40
Lifting unit Wilo-DrainLift MINI5-XS/WC for sewage containing faeces
- Vertical discharge port DN 32/40
- Horizontal discharge port DN 32/40
- Horizontal toilet connection DN 100
- Horizontal inlet DN 40/5
- Additional vertical inlet DN 40
Lifting unit Wilo-DrainLift MINI5-XS/WC for sewage containing faeces
- Vertical discharge port DN 32/40
- Horizontal discharge port DN 32/40
- Horizontal toilet connection DN 100
- Horizontal inlet DN 40/5
- Additional vertical inlet DN 40
Design
Compact lifting unit with alarm contact, ready for connection, for wash basin, shower, bathtub, WC and condensing boiler drainage.
Application
For installation in rooms or as a concealed-wall installation. To be connected to the following drainage fixtures:
DrainLift MINI5-XS/C
- Wash basin
- Shower
- Bathtub
- Dishwasher
- Washing machine
- Condensing boiler
DrainLift MINI5-XS/WC
- Bathroom/toilet
- Wash basin
- Shower
Liquid
DrainLift MINI5-XS/C
For collection and pumping of the following in domestic areas:
- Sewage not containing faeces
- Condensate (as of pH value 2.5) – not in pure form, but rather mixed with sewage from another inlet.
Sewage pumping according to 12050
The sewage lifting unit meets the requirements of EN 12050-2.
DrainLift MINI5-XS/WC
For collection and pumping of the following in domestic areas:
- Sewage containing faeces
Sewage pumping according to 12050
The sewage lifting unit meets the requirements of EN 12050-3.
Equipment/function
- Ready-to-plug
- Level measurement with level sensor
- Vertical discharge port; can be converted to horizontal discharge port.
- At most three inlets
- “WC” version with toilet connection
- Venting with active carbon filter
- “” (DrainLift MINI5-XS/C only)
- Depth suction
- Alarm contact
Typekey
Example: | Wilo-DrainLift MINI5-XS/WC-EF |
MINI5 | Convenient, small lifting unit |
XS | Size |
WC | Connection versions
|
EF | Mains plug version
|
Technical data
- Mains connection: 1~230 V, 50 Hz
- Operating mode: S3 15%
- Fluid temperature: 3 to 50 °C (37 to 122 °F), max. 75 °C (167 °F) for 30 minutes
- Ambient temperature max.: 3 to 40 °C (37 to 104 °F)
- Protection class: IP44
Construction
Wilo-DrainLift MINI5-XS/C
Compact lifting unit with submersible pump, ready for connection. Level measurement performed by a level sensor. Venting is integrated in the inner cover and equipped with an active carbon filter. Additionally, an external alarm signal can be connected to a potential-free contact (maximum switching capacity: 42 V=, 500 mA, contact type: normally closed contact) as a high water alarm. The tank lid seals the unit perfectly.
Up to four connections are available:
- 1x 50 mm inlet (DN 40) without non-return valve, located on top, closed ex-works.
- 2x 50/63 mm inlet (DN 40/50) with non-return valve, located on left and right side, open ex-works.
- 1x 40/50 mm discharge port (DN 32/40) with non-return valve, located on top, open ex-works. If necessary, the discharge port can also be located on the right side. The associated opening is closed ex-works.
Wilo-DrainLift MINI5-XS/WC
Compact, fully submersible lifting unit with submersible pump, ready for connection. The submersible pump is equipped with a rotating blade. The blade reliably shreds faeces in sewage. Level measurement performed by a level sensor. Venting is integrated in the inner cover and equipped with an active carbon filter. Additionally, an external alarm signal can be connected to a potential-free contact (maximum switching capacity: 42 V=, 500 mA, contact type: normally closed contact) as a high water alarm. The tank lid seals the unit perfectly.
Up to five connections are available:
- 1x 50 mm inlet (DN 40) without non-return valve, located on top, closed ex-works.
- 2x 50/63 mm inlet (DN 40/50) with non-return valve, located on left and right side, open ex-works.
- 1x 110 mm toilet connection (DN 100), located in front, open ex-works. If necessary, the WC connection can also be located on the left side. The associated opening is closed ex-works.
- 1x 40/50 mm discharge port (DN 32/40) with non-return valve, located on top, open ex-works. If necessary, the discharge port can also be located on the right side. The associated opening is closed ex-works.
Scope of delivery
Discharge port
- 1x 40/50 mm collar (DN 32/40) for discharge outlet
- 2x 32-50 mm hose clip
Toilet connection (WC version only)
- 1x 110 mm collar (DN 100)
- 1x clamp ring
- 1x 110-130 mm hose clip
Inlet connection
- 2x 63 mm inlet connection (DN 50)
- 2x 50/63 mm collar (DN 40/50)
- 2x non-return valve
- 4x 50-70 mm pipe clamp
- 2x 32-50 mm hose clip
- 2x sealing plug
- 4x O-ring
General
- Install floor fixation (buoyancy safeguards): 2x mounting brackets with screws and wall plugs
- Kit for emergency drainage (drainage hose, hose clip, sealing plug)
- Kit for horizontal discharge port
- Installation and operating instructions
Brochure
Draining rooms the easy way - Lifting units Wilo-DrainLift MNI3 and Wilo-DrainLift MINI5
| Number of pages | 8 |
| Language | en |
PDF (848 KB)Overview of Wilo-DainLift MINI3 and Wilo-DrainLift MINI5 lifting units
| Number of pages | 2 |
| Language | en |
PDF (704 KB)Group Statement
Group Statement REACH
| Edition | 2021-05 |
| Number of pages | 5 |
| Language | language neutral |
PDF (279 KB)| Product description | Article number | |
|---|---|---|
DrainLift MINI5-XS/C-EF | 6095129 | |
DrainLift MINI5-XS/WC-EF | 6095130 |