Wilo-Drain LPC
Вашите преимущества
- Дълъг експлоатационен живот благодарение на стабилното изпълнение от сив чугун
- Не изисква специална поддръжка поради вградения ревизионен отвор
- Гъвкаво приложение
Препоръчителни сервизни услуги
Конструкция
Self-priming, non-submersible pump for stationary installation in a dry environment.
Приложение
- Drainage of construction sites
- Drainage of soakaway and ponds
- Irrigation and sprinkling of gardens and parks
Течности
For the pumping in commercial areas of the fluids listed:
- Wastewater (with small amounts of sand and gravel)
- Industrial water
Кодово означение на типовете
Example: | Wilo-Drain LPC 50/25 |
Drain | Drainage pump |
LP | Self-priming pump |
C | Hydraulics made of grey cast iron |
50 | Nominal size of discharge port |
25 | Max. delivery head in m |
Технически характеристики
- Mains connection: 3~230/400 V, 50 Hz
- Operating mode: S1
- Fluid temperature: 3 ... 80 °C (37 ... 176 °F)
- Ambient temperature: 3 ... 40 °C (37 ... 104 °F)
- Max. suction depth: 7.5 m (24.5 ft)
- IP rating: IP55
- Insulation class: F (155 °C/311 °F)
Материали
Drain LPC 40
- Hydraulics housing: AlSi
- Impeller: EN-GJL-250 (ASTM A48 Class 35b)
- Motor housing: Al
- Sealing:
- Mechanical shaft seal: C/Al
- Static: NBR
- Shaft end: 1.4104 (AISI 430F)
Drain LPC 50
- Hydraulics housing: EN-GJL-250 (ASTM A48 Class 35b)
- Impeller: EN-GJL-250 (ASTM A48 Class 35b)
- Motor housing: Al
- Sealing:
- Mechanical shaft seal: C/Al
- Static: NBR
- Shaft end: 1.4104 (AISI 430F)
Drain LPC 80
- Hydraulics housing: EN-GJL-250 (ASTM A48 Class 35b)
- Impeller: EN-GJL-250 (ASTM A48 Class 35b)
- Motor housing: Al
- Sealing:
- Mechanical shaft seal: SiC/SiC
- Static: NBR
- Shaft end: 1.4104 (AISI 430F)
Конструкция
Drain LPC 40
Self-priming drainage pump in monobloc design with a multi-channel impeller, horizontal suction port, and vertical discharge port. Threaded (male thread) suction and discharge ports. Pump housing made of aluminium, impeller made of grey cast iron. Standard three-phase AC motor without connection cable. Motor housing made of aluminium. Mounted through a low-vibration baseplate.
Drain LPC 50 and LPC 80
Self-priming drainage pump in monobloc design with a multi-channel impeller, horizontal suction port, and vertical discharge port. Threaded (female thread) suction and discharge ports, suction port fitted with non-return valve. Pump housing with an inspection opening for removal of blockages. Pump housing and impeller made of grey cast iron. Standard three-phase AC motor without connection cable. Motor housing made of aluminium. Mounted through a low-vibration baseplate.
Комплект на доставката
- Pump
- Installation and operating instructions
Инструкции за монтаж и експлоатация
Wilo-Drain LPC
| Каталожен номер | 2081598 |
| Издание | 2025-01 |
| Брой страници | 20 |
| Език | en |
PDF (5 MB)Инструкция за обслужване (цифров формат)
Wilo-Drain LPC
| Каталожен номер | 2081598 |
| Издание | 2025-01 |
| Език | cs, de, en, fr, hu, nl, pl, sk, tr |
HTML (75 MB)Сертификационна брошура
Wilo-Drain LPC
| Каталожен номер | 6080664 |
| Издание | 1605 |
| Брой страници | 4 |
| Език | езиково неутрално |
PDF (221 KB)Group Statement
Регламент REACH
| Издание | 2021-05 |
| Брой страници | 5 |
| Език | езиково неутрално |
PDF (271 KB)| Обозначение на продукта | Нагнетател | Номинална мощност на мотора P2 | Захранване от мрежата | Каталожен номер | |
|---|---|---|---|---|---|
Drain LPC 40/19 | R 1½ | 1,1 kW | 3~400 V, 50 Hz | 2081686 | |
Drain LPC 50/25 | G 2 | 2,2 kW | 3~400 V, 50 Hz | 2081660 | |
Drain LPC 80/29 | G 3 | 4 kW | 3~400 V, 50 Hz | 2081693 |