Wilo-Initial Drain | Wilo

Wilo-Initial Drain

Wilo-Initial Drain

Особености/предности на производот

Едноставна инсталација во тесни шахти преку компактната конструкција и малата тежина
Безбедна работа благодарение на следењето на моторот што се вклучува самостојно
Едноставна употреба благодарение на пливачки прекинувач

Препорачани сервисни услуги

Изведба

Submersible pump for transportable wet installation in intermittent operation.

Течности

For the pumping in domestic areas (household) of the fluids listed:

Wastewater (with small amounts of sand and gravel)

Опрема/функција

Integrated operating capacitor
Self-switching thermal motor monitoring
Float switch
Shockproof plug

Означување на типот

Example:	Wilo-Initial DRAIN 10-7/523/AEF-10M
Initial DRAIN	Submersible drainage pump
10	Max. volume flow in m³/h
7	Max. delivery head in m
5	Mains frequency: 5 = 50 Hz 6 = 60 Hz
23	Code for rated voltage: 22 = 1~220 V 23 = 1~230 V
A	Connection cable with float and plug
EF	Plug type EF = type CEE 7/7 B = type B I = type I M = type M
10M	Length of connection cable

Технички податоци

Mains connection: 1~230 V, 50 Hz; 1~220 V, 50 Hz; 1~220 V, 60 Hz
Submerged operating mode: S1
Non-immersed operating mode: S3 25%
IP rating: IP68
Insulation class: F (155 °C/311 °F)
Fluid temperature: 3 ... 35 °C (37 ... 95 °F)

Материјали

Hydraulics housing: PP
Impeller: PA6-GF30
Motor housing: 1.0038 (steel)
Sealing:
- Hydraulics/motor: NBR
- Static: NBR
Shaft end: 1.4005 (AISI 416)

Конструкција

Submersible pump with a vortex impeller and a vertical discharge port with threaded connection (male thread). Pump housing and impeller made of composite material. Surface-cooled single-phase AC motor (operating capacitor integrated) with self-switching thermal motor monitoring and a rotary shaft seal. Motor housing made of steel. Connection cable with a float switch and a shockproof plug.

Опсег на испорака

Pump
Elbow with threaded flange (pre-mounted)
Hose nozzle
Installation and operating instructions

Упатство за вградување и работа